• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1514-1519
• /
• 2001

This paper is concerned with design, manufacturing and performance test of LIPCA ( Lightweight Piezo- composite Curved Actuator) using a top carbon fiber composite layer with near -zero CTE(coefficient of thermal expansion), a middle PZT ceramic wafer and a bottom glass/epoxy layer with high CTE. The main point of this design is to replace the heavy metal layers of THUNDER by thigh tweight fiber reinforced plastic layers without losing capabilities to generate high force and large displacement. It is possible to save weight up to about 30% if we replace the metallic backing material by the light fiber composite layer. We can also have design flexibility by selecting the fiber direction and the size of prepreg layers. In addition to the lightweight advantage and design flexibility, the proposed device can be manufactured without adhesive layers when we use epoxy resin prepreg system. Glass/epoxy prepregs, a ceramic wafer with electrode surfaces, and a graphite/epoxy prepreg were simply stacked and cured at an elevated temperature (177 $^{circ}C$ after following an autoclave bagging process. It was found that the manufactured composite laminate device had a sufficient curvature after detached from a flat mold. The analysis method of the cure curvature of LIPCA using the classical lamination theory is presented. The predicted curvatures are fairly in agreement with the experimental ones. In order to investigate the merits of LIPCA, a performance test of both LIPCA and THUNDE$^{TM}$ were conducted under the same boundary conditions. From the experimental actuation tests, it was observed that the developed actuator could generate larger actuation displacement than THUNDERT$^{TM}$.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.123-132
• /
• 2013

This survey was conducted to investigate the current state of odor emission and control from 48 site of Hanwoo, dairy, swine and poultry farms in Korea. On-site complex odors assessment by the method of 6 step direct sensory evaluation and ammonia concentrations by portable gas detector on the boundary line of farms were evaluated and detected as 1.11 & 2.78 ppm, 1.67 & 2.56 ppm, 1.91 & 2.89 ppm, 1.8 & 2.4 ppm and 1.33 & 2.33 ppm, respectively. Almost of Hanwoo, dairy and poultry farms were nothing the complaints occurred for the last 2 years, however as 60% of swine farms were suffered odor complain. All of livestock operations were used the additives for improving the farm environment and spent the considerable costs for odor reduction. There were several plans almost farms, as a fortify maintenance, keep clean, tree planting, expansion facilities for manure treatment or odor reduction.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.53-66
• /
• 2002

The spiral form, which comes from the organic form of natural phenomenon such as growth of creatures, has been used as a factor of formative shape in various fields of art until now. In conjunction herewith, this study intends to discover and express the life force and the formative beauty of natural substances with the organic spiral forms into clothing design, using various creating methods and materials such as Korean traditional paper. The natural substances with the spiral structure, such as seashells, land snails, passion flower, curled flower, growing chart of plants, Impatiens textori was used as subjects of the designs. The seven pieces of work were completed with attempts to develop aesthetic forms through the presentation techniques and methods via restructuring process of simplification, partial transformation and consolidation. Through such process the conclusion of this study is as follows: First, the nature, with unlimited possibilities, could be subject of human formative activities, leading to the creative world of formative art for designers. Second, adaptation of the spiral organic forms of nature into the contemporary clothing designs proved the motif as a source of inspiration of diverse subject, in recognition with its innate formative beauty as well as external shape. Third, design expressions via restructuring process of simplification, partial transformation and consolidation with designer's subjective point of view were adequate for the creations of contemporary fashion designs. Fourth, the Korean traditional paper, as a fine material for various shape according to the handling method, could be used appropriately in the contemporary clothing designs, expressing our aesthetic senses. Fifth and finally, expansion of the realm of formative expression of clothing through the development of possibilities of expression in contemporary clothing would enhance the creative possibilities of clothing design as formative art. In conclusion, the expression of clothing design as formative art was developed on the emphasis of re-creation of natural objects of the organic spiral form. For the future study, the applications of spiral form into everyday clothing designs, consolidating artistic senses and practical senses, are expected as opportunity of proposing developmental possibilities of the contemporary clothing designs.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.149-157
• /
• 2020

The current study tests the effect of fashion product knowledge and confidence in fashion coordination on innovative fashion product acceptance, mediated by creative fashion consumer efficacy. Creative fashion consumer efficacy refers to a consumers' belief in the ability to consume fashion products in a creative way. The survey was conducted on 474 people between 20 and 40 years of age in a panel of online survey firms. Data was analyzed using reliability analysis and frequency analysis by SPSS 20.0 along with confirmatory factor analysis and structural equation modeling done by AMOS 20.0. The results reveal that creative fashion consumer efficacy consists of original thinking efficacy, usage expansion efficacy, problem solving efficacy, and method variation efficacy that is consistent with the original structure of creative consumption efficacy. In addition, fashion product knowledge and confidence in fashion coordination do not affect innovative fashion product acceptance. The effects of fashion product knowledge and confidence in fashion coordination on innovative fashion product acceptance are fully mediated through creative fashion consumer efficacy. The results of this study demonstrate that people who are knowledgeable, confident and associated with fashion product consumption can have a high level of creative fashion consumer efficacy that increases innovative fashion product acceptance.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.537-542
• /
• 2011

The thermo-mechanical interaction between brake block and wheel tread during braking has been found to cause thermal crack on the wheel tread. Due to thermal expansion of the rim material, the thermal cracks will protrude from the wheel tread and be more exposed to wear during the wheel/block contact than the rest of the tread surface. The wheel rim is in residual compression stress when is new. After service running, the region in the tread has reversed to tension. This condition can lead to the formation and growth of thermal cracks in the rim which can ultimately lead to premature failure of wheel. In the present paper, the thermal cracks of railway wheel, one of severe damages on the wheel tread, were evaluated to understand the safety of railway wheel in running condition. The residual stresses for damaged wheel which are applied to tread brake are investigated. Mainly X-ray diffusion method is used. Under the condition of concurrent loading of continuous rolling contact with rails and cyclic frictional heat from brake blocks, the reduction of residual stress is found to correlate well with the thermal crack initiation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.648-662
• /
• 1993

The summarized findings resulted from experiments and investigation are suggested as follows ; The analysis of measurements on the lower limb movements : For this experimentation, data was collected from three hundred and eighty female, age 19 to 23, who answered five lower limb movements(M1~M5). The statistics show that the order of the expansion ratio is gluteal area-length/knee-girth/back-line/knee-depth/thigh-depth/hip-girth, from the highest to the lowest in all movements. When comparing the correlation coefficient of the measurements, the values of the correlation coefficient of the height and the length items are very low, but those of the girth, the breadth, and the depth items are relatively high and those of the waist and the hip items are highest. For more sophisticated analysis, the factor analysis was conducted on the lower limb movements. Four factors were classified on the factor load by the "varimax rotation" method. Each movement shows the most important factor differently, as follows ; the most important factor in M1 is "the shape factor of lower limb below hip-line", that in M2 is "the cross-sectional shape factor", that in M3 is "the size factor of abdominal and loins region", and those in M4 and M5 accord with the interpretation of M3. When the investigation of the estimated function was conducted, in the selectional case of representative items on the slacks construction, it found that it would be better to add abdomen and thigh items as important considerations to waist girth, hip girth and crotch length.

• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.117-128
• /
• 2006

The purpose of this study was to understand changes of the current young generation's lifestyle, aesthetic attitude for an appearance, and way of thinking by making a close investigation into metrosexual, the recent mode, and find out its cultural and social implications. As a method of the study, the literature and the Internet data were reviewed. Articles from newspapers, magazines and the Internet were chosen roughly from the year 2000 to now because metrosexual mode remarkably boomed before and after 2000. Books related to the theory on the mode in a costume culture were referred. Also, articles in daily newspapers which dealt with cultural and social issues were reviewed, fashion magazines for men such as Esquire and GQ showing the new trend in men's lifestyle and fashion were examined, and the Internet providing us the latest news from cultural and social topics to fashion trends were investigated. The backgrounds of the rise of metrosexual mode were a collapse of stereotypes in various fields, spread of lookism in a visual image period, extension of commercialism, and expansion of men's character casual trend. Metrosexual was defined as an urban male with a strong aesthetic sense who spends a great deal of time and money on his appearance and lifestyle. His fashion style was characterized by slim and flowing silhouette, feminine and luxurious materials such as transparent chiffon, silk and cotton with a light and soft touch, and a knitted wear with a flowing line, a wide variety of vivid and pastel colors, floral and geometric patterns, and the decorative details like lace, beads, embroidery, and fur. From spread of this mode, two cultural and social implications were extracted. Firstly, the current young generation's aesthetic standards for the perfect man changed from macho man to considerate man who had a good appearance and this suggested that a conventional sex role broke down. Secondly, men began to explore for their own identity escaping from traditionally standardized masculinity that they had been forced to follow.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.3
• /
• pp.153-158
• /
• 2015

In order to find out a method to improve awareness of biomedical laboratory science about forensic medicine education and suggest a plan for invigoration, we carried out a survey targeting 100 students of biomedical laboratory science of Daegu Health College in Daegu region and implemented their awareness and requirement forensic medicine subject, which suggested very high awareness of most of the students about forensic medicine as a result. Out of 100 respondents, in the result of survey for students' awareness of forensic medicine, 94 (94%) answered that they were aware of it, We could find that they have high expectation from forensic medicine, and current biomedical laboratory science showed very high awareness and requirement for forensic medicine education. Therefore, rather than focusing only on core courses required for medical technologist, it is necessary to set up a program to introduce forensic subjects for expansion of professional areas and activation which can promote employment of medical technologists.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.569-576
• /
• 2003

Although the Free Trade Zone(FTZ) are actually competing with various strategies, the definition and structural understanding of activation strategies are not known very much Therefore this study has launched from this fact, and has the objective of obtaining the structural model for activation strategies in Gunsan FTZ, and understanding the components of activation in these region The process began by abstracting the components that composed the success factors in FTZ through recent research, and grouping it by the most core components. Also, by using the FSM(Fuzzy Structural Modeling) method to understand the structure of the grouped components, and the structural model for activation of FTZ was able to obtain as the result. When analyzing the obtained structural model, expansion of tax reduction, flexibility of law systems and good business environment came out to be the most important component groups, and especially flexibility of law systems and good business environment were the most effective component that effected all the other components overall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2010

The interaction of oblique incident waves with a porous dual semi-cylindrical structure is investigated under the assumption of linear potential theory. The porous dual semi-cylindrical structure consists of two concentric bottom-mounted cylindrical structures that are porous in front half and transparent in back half. By changing porosity, gap, and wave characteristics(wave frequencies, incidence angle), the wave blocking performance as well as the wave loads and the wave run-up are obtained. As a convenient measure of overall wave blocking performance, the root mean square(R.M.S.) of the wave elevation in a sheltered region is used. It is found that the porous semi-cylindrical structure may significantly reduce the wave response in a sheltered region and the wave forces decrease largely compared to the impermeable structure. The dual structure is more effective in reducing the wave response in a sheltered region than the mono type in the region of high frequencies.