• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1126-1139
• /
• 2016

In this research, for the first time, a new optimization method, i.e., strength Pareto evolutionary algorithm II (SPEA-II), is developed for the burnable poison placement (BPP) optimization of a nuclear reactor core. In the BPP problem, an optimized placement map of fuel assemblies with burnable poison is searched for a given core loading pattern according to defined objectives. In this work, SPEA-II coupled with a nodal expansion code is used for solving the BPP problem of Kraftwerk Union AG (KWU) pressurized water reactor. Our optimization goal for the BPP is to achieve a greater multiplication factor ($K_{eff}$) for gaining possible longer operation cycles along with more flattening of fuel assembly relative power distribution, considering a safety constraint on the radial power peaking factor. For appraising the proposed methodology, the basic approach, i.e., SPEA, is also developed in order to compare obtained results. In general, results reveal the acceptance performance and high strength of SPEA, particularly its new version, i.e., SPEA-II, in achieving a semioptimized loading pattern for the BPP optimization of KWU pressurized water reactor.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.3
• /
• pp.17-20
• /
• 1983

There have been many investigations of predicting the added resistance of a ship in seaway since Havelock discussed this topic in 1937. Among these researches, Maruo's theoretical approach is known as the most consistent mathematical representation for added resistance of a ship in regular head sea. In his theory, the hull form of a ship is represented under the slender body approximation. But the motion responses which were used for the calculation of the added resistance have been obtained by using the strip method which is based on an approximation that the hull form may be expressed as set of two dimensional cylinder sections in longitudinal direction. Therefore two different methods for hull form representation were implicity used in Maruo's original work for the added resistance calculation. Utilizing the characteristics that hull forms are usually slender, Kan expressed the hull form as two dimensional cylinder at each station by using the Taylor series expansion for the length wise direction. Putting this idea into Maruo's original work, the added resistance can be obtained with the explicitly unique representation of the hull form. For the purpose of comparison the added resistance of a hull form(series 60, Cb=0.6) was calculated by using the motion response obtained by Shintani. The numerical result showes a good qualitative agreement with the experimental result by Sibul.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.121-134
• /
• 1999

In this paper, a ship calculation program is developed, which prof[nuts hydrostatics and volume calculation intact and damage stability and hull variation. Hull form and compartment geometry are expressed with NURBS curve wire-frame model. Hydrostatics and volume calculation are performed directly with the intersection method between section geometry and 3D planar surface. Equilibrium ship position is calculated with hydrostatic equilibrium equation which is linearized by 1st order Taylor series expansion sequentially. The developed program shows more accurate results and easy uses than the latter.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1886-1894
• /
• 2009

The widening national capital area of Korea has caused a traffic jam problem with increasing commuting hours. In addition, as the economic crisis goes on, the people moving to the outside of a city has increased. So we expect that the expansion of this metropolitan area will do grow and it will cause a more severe traffic jam in the near future. Therefore, We will study about 'Rapid Railroad Operation in Metropolitan Area' to solve this problem and improve rail's competitive power as a reasonable transportation method. The Rapid Railroad can sharply reduce commuting hours. Also, it is more eco-friendly transportation than the others. Through many cases revealed in both domestics and overseas, we will solve the problem of a traffic jam getting senous m metropolitan area. After studying successful cases of overseas, rapid railroad, such as France and Japan, we will study domestic cases of Yongsan$\sim$Dong-inchoen, Guro$\sim$Cheonan and Gaehwa$\sim$Sin-nonhyeon, and comparison will do made among these case. In conclusion, The introduction of Rapid Railroad show the effective plan for strengthen the competitiveness and solve the traffic problem.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.782-787
• /
• 2008

The Kalina cycle simulation study was carried out for a preliminary design of a geothermal power generation system. The Kalina cycle system can be used for the utilization of a low-temperature heat sources such as geothermal and industrial waste heat that are not hot enough to produce steam. The sea/river water can be considered as a cooling media. A steady-state simulation model was developed to analyze and optimize its performance. The model contains a turbine, a pump, an expansion valve and heat exchangers. The turbine and pump were modelled by an isentropic efficiency, while a condenser, an evaporator and a regenerative heat exchanger were modeled by UA-LMTD method with a counter-flow assumption. The simulation results show that the power generation efficiency over 10% is expected when a heat source and sink inlet temperatures are $100^{\circ}C$ and $10^{\circ}C$ respectively.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.422-430
• /
• 1998

This paper presents the results of a major parametric study on the collapse cause of the Sungsoo Grand Bridge, a Gerber-type continuous truss bridge, which had collapsed just at the 15th year since opening to traffic. Among the various collapse causes such as poor design, poor welding, poor maintenance, and heavy traffic loads, this study focuses on the collapse cause assessment incorporating the effects of braket and H-beam members right below the expansion joint of the suspended truss. A local FEM analysis using fine shell elements is carrided out for the more precise estimation of stress range of the vertical pin-connected hanger whose fatigue fracture triggered the collapse of the bridge. Both the conventional S-N approach and the Ang-Munse's fatigue reliability method are used for the evaluation of the fatigue life and fatigue failure probability for the assessment based on all the available results of various field and labolatory tests. From these observations, It may be affirmatively stated that the effects of bracket and H-beam members accelerated the fatigue failure, and thus should be regarded as one of major causes that triggered the bridge collapse

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1600-1604
• /
• 2017

Mo-Cu alloys have been widely used for heat sink materials, vacuum technology, automobile and many other applications due to their excellent physical and electronic properties. Especially, Mo-Cu composites with 5~20 wt% copper are widely used for the heavy duty service contacts due to their excellent properties like low coefficient of thermal expansion, wear resistance, high temperature strength and prominent electrical and thermal conductivity. In most of the applications, high dense Mo-Cu materials with homogeneous microstructure are required for high performance, which has led in turn to attempts to prepare ultra-fine and well-dispersed Mo-Cu powders in different ways, such as spray drying and reduction process, electroless plating technique, mechanical alloying process and gelatification-reduction process. However, most of these methods were accomplished at high temperature (typically degree), resulting in undesirable growth of large Cu phases; furthermore, these methods usually require complicated experimental facilities and procedure. In this study, Mo-Cu alloying were prepared by planetary ball milling (PBM) and spark plasma sintering (SPS) and the effect of Cu with contents of 5~20 wt% on the microstructure and properties of Mo-Cu alloy has been investigated.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.51-57
• /
• 1995

A simplified stress analysis of perforated plates was carried out using homogenization technique. Homogenization technique, which introduced miroscale expansion in the standard finite element method, reconstructed the plate with regularly placed holes into a set of macroscale and microscale models. The microscale model helped compute homogenized material constants of the unit cell, which were used to compute macroscale displacements in the macroscale model. Also it was possible to compute the stress field of the plate using the microscale model. It was found that reasonable equivalent material constants were computed and that the required degrees of freedom was drastically reduced when homogenization technique was employed in the stress analyses. The microscale modeling in the homogenization technique provided a useful concept of pre- and post-processing in the stress analysis of perforated plates.

• Journal of the Korean Society for information Management
• /
• v.28 no.3
• /
• pp.47-64
• /
• 2011

This study analysed the librarian competencies and job type to identify the present state of required librarians and to suggest the direction for education in the organization of information. As the result of investigation 278 job announcement, the traditional qualifications and the knowledge of new standard and S/W related electronic resources are required. The job type divided between cluster for the traditional demands and cluster for electronic resources and information technology. It proposed the expansion of education related electronic resources and information technology, the balance of theory and practice, and the adoption of new teaching method for education in the organization of information.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.967-976
• /
• 2020

This study aims to improve knowledge of consumers' decision-making by testing a conceptual model that considers the hotel's service quality and service value toward customers' behavioral intentions using a mediator, which is the role of consumers' satisfaction. The object of this research is five-star hotels, which has become a significant segment of the general hotel industry and is undergoing rapid expansion. This research is a quantitative research using questionnaire as the sampling method answered by people who have stayed at five-star hotels before. The total of 150 valid respondents were used in this study. The collected data was processed by a statistical tool software, Partial Least Square (PLS). The major findings of this research showed that the relations between service quality and service value of five-star hotels do not have significant positive impact on consumers' behavioral intention, nonetheless the mediation analysis shows that customers' satisfaction partially mediates service quality and service value with consumers' behavioral intentions to stay. It means that in this case, consumers' satisfaction has an important role to mediate service value quality and service value. As a result, the study shows that four out of six hypotheses are supported. A couple of recommendations are suggested for further research.