• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.52.2-53
• /
• 2017

We develop a methodology to use the redshift dependence of the galaxy 2-point correlation function (2pCF) as a probe of cosmological parameters. The positions of galaxies in comoving Cartesian space varies under different cosmological parameter choices, inducing a redshift-dependent scaling in the galaxy distribution. This geometrical distortion can be observed as a redshift-dependent rescaling in the measured 2pCF. The shape of the 2pCF exhibits a significant redshift evolution when the galaxy sample is analyzed under a cosmology differing from the true, simulated one. Other contributions, including the gravitational growth of structure, galaxy bias, and the redshift space distortions, do not produce large redshift evolution in the shape. We show that one can make use of this geometrical distortion to constrain the values of cosmological parameters governing the expansion history of the universe. This method could be applicable to future large scale structure surveys, especially photometric surveys such as DES, LSST, to derive tight cosmological constraints. This work is a continuation of our previous works as a strategy to constrain cosmological parameters using redshift-invariant physical quantities.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.31.3-32
• /
• 2018

Supernovae (SNe) are well known as good cosmological distance probes owing to their brightness. Specifically, type Ia SNe contribute greatly to our understanding of acceleration of cosmic expansion. However, type IIP supernovae are the most common type of SNe and have been found out to a large redshift, so the application of these SNe as distance indicators is promising. IMSNG is a project for monitoring nearby galaxies (<50Mpc) to catch early light curves of transients and get inspections of their progenitors. The daily monitoring observation allows us to construct a dense light curve of SNe, too. In this talk, we present the light curves of two SNe IIP, SN 2014cx (NGC337) and SN 2017eaw (NGC6946), using our IMSNG data. A newly developed technique, the Photometric Color Method (PCM), employs only photometric data to estimate distances for SNe IIP. We present the distances to our targets measured through PCM and compare this to that of obtained via other methods.

• Research in Community and Public Health Nursing
• /
• v.26 no.3
• /
• pp.209-220
• /
• 2015

Purpose: This study developed a short-term education program aiming to strengthen global health capacity in nursing students, and examined the effects of the program. Methods: The subjects of this study were 83 students recruited from 29 nursing colleges. Domestic workshops and overseas training in the Philippines were offered. For data collection and analysis, the triangulation method was adopted. Results: Students' critical thinking disposition and global leadership capacity were significantly increased. Thematic content analysis derived fifteen themes: expansion of global health, understanding of cultural diversity, vision of being a global leader, cultivation of communication skills, open mind toward people with different culture, pride and vocation, understanding of nursing in foreign countries, understanding of visiting nurse service, sustainability, understanding of local needs and environments, and education methods with an emphasis on participants, broader view and thinking of the world, reflection on the characteristics of a nurse, development through cooperation, and development through programs. Conclusion: The global health capacity building program improved nursing students' view of global health and nursing care. It is needed to develop continuously diverse global health capacity-building programs for nursing students.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.5
• /
• pp.7-14
• /
• 2004

The interaction of incident manochromatic waves with an array of N surface-piercing porous dual cylindrical structures is investigated in the frame of three-dimensional linear potential theory. The dual cylindrical structure is camposed of concentric two cylinders. The exterior cylinder is porous and the interior cylinder is impermeable. The fluid domain is divided into N+1 regions i.e. a single exterior region and N interior regions. The diffraction potentials in each region representing the scattering of incident waves by an array of porous cylindrical structures are expressed by the Fourier Bessel series. The unknown coefficients in each region are determined by applying the porous boundary condition and continuity of mass flux at the matching boundary. It is found that an array of porous cylindrical structures reduces both the wave forces and the wave run-up, and shows the excellent performance of wave blocking. The results show that various types of breakwater exchanging seawater are prospective by controlling the porosity and the configuration of cylindrical structures.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1138-1146
• /
• 1996

Al2TiO5 powder was prepared by the sol-gel processing from th metal alkoxides ; aluminium sec-butoxide (Al(OC4H9)3 and tetraethyl orthotitanate (Ti(OC2H5)4) The particles of Al2TiO5 produced from alkoxides were measured to be below $1.5mutextrm{m}$ and mre than 90% weere below 1 ${\mu}{\textrm}{m}$ however those from commercial alumina and titania were over 0.5-7${\mu}{\textrm}{m}$ and only 60% were below 1${\mu}{\textrm}{m}$ and 90% were below 2.5${\mu}{\textrm}{m}$ Therefore Al2TiO5 powder produced from alkoxides had the narrower distributionin size than that produced from the commercial alumina and titania powders. The addition of mullite or Al2O3 powder to the prepared aluminum titanate inhibited the grain growth and this resulted in decreased and increase in density.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• Journal of Korean Elementary Science Education
• /
• v.30 no.4
• /
• pp.514-523
• /
• 2011

The purpose of this study was to investigation the elementary school teachers' perception in STEAM(Science, Technology, Engineering, Arts, Mathematics) Education. For this study, 93 elementary school teachers who have taught mathematics/science in gifted class were selected and a fifteen items questionnaire designed to elicit teachers' perception of steam education was to administered to them. The major findings are as follows: First, the ratio of teachers who understood a steam education exactly is very low. But teachers have positive thoughts about the need of steam education. Second, teachers thought that steam education has a good effect on elementary education. Third, teachers thought that steam education will be an alternative teaching and learning method. Fourth, teachers have negative thoughts to participate in class work related on steam education. To improve negative attitudes on steam education, incentives for teachers seems to be required. In order to spread steam education among the elementary school teachers successfully, the expansion of school facilities, administrators and staff in mind, improving financial support, strengthening education through the development of content and teaching strategies were analyzed as a challenge.

• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.461-466
• /
• 2013

In this research, the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engine to the atkinson cycle, and general cycle features were analyzed after comparing these two cycles. That an experimental single cylinder and a long stroke diesel-atkinson engine, of which S/B ratio was more than 3, were manufactured. After evaluating the engine through basic experiments, a diesel engine was converted into the atkinson cycle by constituent VCR (variable compression ratio) device and VVT (variable valve timing) system. The experimental method was to observe compression work reduction effects due to low compression effects from delayed intake valve closing of the early stage atkinson engine. The result, the possibility of increasing compression ratio about each engine load was confirmation by constructing compensate expansion-compression ratio in accordance with the delayed intake valve close.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.642-648
• /
• 2017

The use of fossil is causing enviromental all over the world. So hydrogen energy is attracting attention as one of the alternative. The government announced that 30% of the air pollution is because of the Internal Combustion Engine Vehicle. In addition, they plans to reduce Internal Combustion Engine Vehicles by 2030 and increase (electric vehicles, EV) or (fuel cell vehicle, FCV). The FCV is evaluated as a next-generation green car because it has a long driving distance and short charging time. However, the hydrogen industry is not able to expand due to the lack of refueling infrastrucutre. This paper predicts the site of hydrogen refueling stations for the expansion of the hydrogen industry and proposes a method to supply hydrogen multi energy filling stations.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.235-236
• /
• 2008

Recently, the power load is growing larger and because of the environmental limitation of generation, the expansion of generation facilities are becoming more difficult. For that reason the importance of the demand-side resources come to be higher. One method of the demand-side resource, the DLC Program, has executed, and moreover, the loads which are available to be controlled are increasing. It should be considered of some kinds of power system components such as DLCs, because the fact that using the demand resources will be an important part of the power system. This paper considers the power factor of the load-bus which is shedded in the direct load control program. and then analyze the power system using flow sensitivity and voltage sensitivity. In this paper, we assumed two scenarios through the rank of the load power factor at each bus and to compare and evaluate each case, we used Power World for the simulation.