• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.149-156
• /
• 2011

This paper reveals a distance estimation algorithm based on multi-code ultrasonic and wireless sensor network. For measuring the distances among the sensor nodes, each ultrasonic transmitter transmits multi-code ultrasonic signal simultaneously. Receivers use cross correlation method to separate the coded signals. The information of measured distances is broadcasted to each sensor node by wireless sensor network. The wireless sensor network measures the distance among the sensor nodes using the received signal strength of the broadcasting. The multi-code ultrasonic have a limitation of measurable distance. And the received signal strength is affected from an environment. This paper measures a distance using ultrasonic and a received signal strength in short range. These measured data are applied to the least square estimation algorithm. By the expansion of the fitting curve, a distance measurement in long range using the received signal strength is compensated. The coupled system reduce the error to an acceptable level.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.71-80
• /
• 1996

Sattering problem of electromagnetic waves by periodic strip grating with two dielectrics over a ground plane in case of oblique incidence and arbitrary polarization is analyzed by the vector floquet mode expansion method and the moment mehtod from the viewpoint of soft and hard boundary value problem. To confirm proposed analysis methods, we examine the solution convergence for the scattering problem. And some numerical results of artificially soft and hard surfaces using the structure filled with single dielectric slab between periodic strip grating and gorund plane is compared with previous results. Some interesting results for soft and hard surfaces using periodic strips loaded with two layered dielectric slabs over a ground plane are given.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.2
• /
• pp.323-334
• /
• 2002

Purpose: This study was designed to analyse economical efficiency of home care service by comparing a cost-effectiveness ratio(CER) between hospitalization and home care service. Method: The analytic framework of this study was constructed in 5 stages; perspective of the analysis, measurement of costs, measurement of effects, analysis of CER, and sensitivity analysis. The SAS program was utilized for the general characteristics of the subjects, descriptive statistics, homogeneous test, normality test and difference test. Result: The results were as follows; 1) CER was 35,248,256 of ADL, 7,996,026 of nursing satisfaction, 6,144,946,000 of QALY of patients in the hospital and 11,168,863 of ADL, 2,322,239 of nursing satisfaction, 3,674,556,000 of QALY of patients in the home care center. ICER was 438,067,932 of ADL, -190,044,176 of nursing satisfaction, 8,615,336,000 of QALY. 2) In the sensitivity analysis of sex, age and discount rate, the CER of patients in the home care center was lower than the CER of patients in the hospital. Conclusion: With these findings, it affirmed that home care service had an economical efficiency compared with hospitalization in cerebrovascular disease patients. Therefore, these results will be used to develop governmental policy or expansion of the home care service.

• Journal of architectural history
• /
• v.7 no.1 s.14
• /
• pp.31-48
• /
• 1998

Soengyo-jang has some characteristics as the most great house, the special functions, and the non-regional type of house form. And it has constructed continuously for two centuries by many owners in the different generations, It needs a special research method ; which are consist of a) comprehension of background information from documents and oral instructed materials, b) pursuit of design process through the building survey, and c) theoretical interpretation about 'collectivism'. From the results of this research, it is revealed that the architectural purpose of this house was constructing 'a great manor'. At first phase, it had been a single ordinary house, at second, it had expanded to a complex including many housing clusters, and finally became to expand its dwelling territory into whole village. Its expansion was progressed by the four collecting phases of which were building, building cluster, group of clusters, and topological setting. Main design elements operated in each of collecting phases ; they were partial element of , exterior spaces of , a linear building of , and a pavilion of . The last two elements were also powerful datum.

• Journal of Magnetics
• /
• v.13 no.2
• /
• pp.61-64
• /
• 2008

We studied the effect of the variation of the lattice constant on the electrical properties of $SrRuO_3$ thin films. In order to obtain films with different volumes, we varied the substrate temperature and oxygen pressure during the growth of the films on $SrTiO_3$ (001) substrates. The films were grown using a pulsed laser deposition method. The X-ray diffraction patterns of the grown films at low temperature and low oxygen pressure indicated the elongation of the c-axis lattice constant compared to that of the films grown at a higher temperature and higher oxygen pressure. The in-plane strain states are maintained for all of the films, implying the expansion of the unit-cell volume by the oxygen vacancies. The variation of the electrical resistance reflects the temperature dependence of the resistivity of the metal, with a ferromagnetic transition temperature inferred form the cusp of the curve being observed in the range from 110 K to 150 K. As the c-axis lattice constant decreases, the transition temperature linearly increases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.699-702
• /
• 2001

The increasing demand in industry to produce rectangular cans at the reduction by the rectangular backward extrusion process involves better understanding of this process. In 2-D die deflection and dimensional variation of the component during extrusion, punch retraction, component injection and cooling was conducted using a coupled thermal-mechanical approach for the forward extrusion of aluminum alloy and low-carbon steel in tools of steel. Backward extrusion FE simulation and experimental simulation by physical modeling using wax as a model material have been performed. These simulations gave good results concerning the prediction of th flow modes and the corresponding surface expansions of the material occuring at the contact surface between the can and the punch. There prediction are the limits of the can height, depending on the reduction, the punch geometry, the workpiece material and the friction factor, in order to avoid the risk of damage caused by sticking of the workpiece material to the punch face. The influence of these different parameter on the distribution of the surface expansion along the inner can wall and bottom is already determined. This paper deals with the influence of the geometry changes of the forming tool and the work material in the rectangular backward using the 3-D finite element method.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.40-45
• /
• 2002

There has been several meaning full efforts to save costs and expand the life-time of a system in changeful If circumstance. It was a module-based architecture that empower productivity at structured programming. It couldn't grow nor evolve, but could raise only calling frequency of module. But OOP or OO-method overcome limit of structured programing by class inheritance and/or overloading and/or over-riding. A component centric architecture, what is mixture of distributed systems, like CORBA. COM+ or EJB/J2EE with OOP. can support not only high reusability or expansion of life-time but also Plug-&-Play between component. In now day. It is not problem of component building but problem of interoperability between heterogeneous CBD Platform. At this study, the enhanced referential component architecture will be suggested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.234-242
• /
• 1999

Flow phenomena such as the pressure transients Inside a high-speed railway tunnel and the Impulsive waves at the exit of the tunnel are closely associated with the characteristics of the entry compression wave, which is generated by a train entering the tunnel. Tunnel entrance hood may be an effective means for alleviating the Impulsive waves and pressure transients. The objective of the current work is to explore the effects of the train nose shape and the entrance hood on the characteristics of the entry compression wave. Numerical calculations using the method of characteristics were applied to one-dimensional, unsteady, compressible flow field with respect to high-speed railway/tunnel systems. Two types of the entrance hoods and various train nose shapes were employed to reveal their influences on the entry compression wave for a wide range of train speeds. The results showed that the entry compression wave length increases as the train nose becomes longer and the train speed becomes lower. The entry compression wave length in the tunnel with hood becomes longer than that of no hood. Maximum pressure gradient in the compression wavefront reduces by the entrance hood. The results of the current work provide useful data for the design of tunnel entrance hood.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.49-55
• /
• 2016

Electrohydraulic forming (EHF) is a high-speed forming process that uses an electric arc discharge in water. Shock waves resulting from the electric arc discharge are propagated to the blank through water and the blank moves toward the die. Advantages of EHF include improved formability due to the high-speed process and reduction of the bouncing effect. In the current study, a numerical simulation of EHF was developed using LS-DYNA. In the simulation, the model for the electric arc was assumed as an adiabatic gas expansion and an Arbitrary Lagrange-Eulerian (ALE) multi material formulation was used to describe the interaction between the electric arc and the water. In order to model the Fluid-Structure Interaction (FSI), a coupling mechanism was used. The blank of Al 1100-O was simulated using shell elements. The results of the simulation showed that the blank was deformed due to the pressure propagation of water and the bouncing effect did not affect the formability of blank.

• Journal of Welding and Joining
• /
• v.9 no.3
• /
• pp.41-51
• /
• 1991

The thermomechanical coupling phenomena in the resistance welding process is complicated due to interactions of mechanical, thermal and electrical factors. Although experimental investigations of resistance spot welding have been carried out, but there are a few by computer simulation. so the purpose of this research is to decrease the time and cost much required in experimental investigation by carrying out the analysis of the resistance spot welding process through computer simulation based on the finite element method. The tool used in the computer simulation is the commercial ANSYS program package. A two dimensional axisymetric model is used to simulate the resistance spot welding for two stainless steel sheets of equal thickness and parametric study is carried out for variable welding current, workpieces of unequal thickness and dissimilar materials. The results from the computer simulation are in good agreement with the experimental one. Through these results, such items as stress distribution, temperature profiles, thermal expansion and weld nugget formation are predicted. Reliability and applicability of finite element models have been demonstrated to simulate and to analyze the resistance spot welding process.