• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.106-119
• /
• 1996

The ceramic has various high mechanical properties such as heat, abrasion, corrosion resistance and high temperature strength compared with metal. It also has low speciffic weight, low thermal expansibillity, low thermal conductivity. However, it could not be used as structural material since it is brittle and difficult for the machining. Therefore, there have been many researches to attempt to join ceramic with metal which is full of ductillity in order to compensate the weakness of ceramic.The problem is that residual stress develops around the joint area while the ceramic/metal joint material is cooled from high joining temperature to room temperature due to remarkable difference of thermal expansion coefficients between ceramic and metal. Especially, the residual stress at both edges of the specimen reduces the strngth of joint to a large amount by forming a singular stress field. In this study, two dimensional finite element method is attempted for the thermal elastic analysis. The joint residual stress of ceramic/metal developed in the cooling process is investigated and the change of joint residual stress resulted from the repetitive heat cycle is also examined. In addition, it is attempted to clarify the joint stress distribution of the case of tensile load and of the case of superposition of residual stress and actual loading stress.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1328-1339
• /
• 2008

For a commonly used piezocone with a shoulder filter element, dilatory dissipation behavior, which shows an initial temporary increase in pore pressure, has been observed in overconsolidated cohesive soils. However, there is no appropriate way to estimate a consolidation parameter from a dilatory dissipation curve because currently available interpretation methods were developed based on the monotonic decrease of the excess pore pressure. In this study, the interpretation method for evaluation of coefficient of consolidation from a dilatory dissipation result of piezocone test was developed by performing the finite difference analysis on the dissipation after cone penetration. The distribution of the initial excess pore pressure induced by cone penetration, which is the core of the analysis, was estimated from the empirical modification of a solution proposed by cavity expansion theory and critical state concept. And the proposed interpretation method was applied to the field piezocone data and the results were compared to those obtained from laboratory tests. Its reliability was confirmed by the insignificant difference between the values of coefficient of consolidation from piezocone tests and laboratory consolidation tests.

• Journal of the Korean housing association
• /
• v.18 no.6
• /
• pp.115-123
• /
• 2007

This study aims to analyse the method and strategy of spatial composition in the selective works of Italian architect Carlo Mollino. With the continuos renovation of the interpretative frames and method on modernity and in particular on the spatial phenomenon, works of Mollino, once disregarded by the historiography and evaluated for its peculiarity. emerge as important architectural phenomenons. The intrinsic value in his works also enable to comprehend the complexity and multiplicity of modernity in contemporary architecture. In order to achieve this preposition, six important works were analyzed with three key words, to understand comprehensively the process and the significance of each work and Mollino's contribution in the spatial composition of domestic and public spaces. Evaluation of the spatial strategies in conceptual investigations of Mollino had been underestimated to the relative poor conservation or incomprehension of various work, excluded from the categories of architectural elaborations. This study also aims to contribute, in the broad sense, the dialectical significance of modernity by emphasizing the aspects of his work related with Surrealism and vernacular tradition, as well as with its relationship with the various spatial dispositives.

• Korea Journal of Hospital Management
• /
• v.22 no.3
• /
• pp.46-60
• /
• 2017

The purpose of this study is to analyze the difference of productivity according to environmental factors among 25 Regional base public hospitals. Also this study is to propose a method to improve the productivity of Regional base public hospitals in the future by improving the public performance and stable management performance by studying the productivity variables affecting profitability. The survey period was based on the last three years, and 25 Regional base public hospitals were selected for the survey. The dependent variable is the total capital medical marginal profitability and the medical profit marginal profitability which are the indicators of profitability. The independent variable, productivity, is classified into three indicators: capital productivity, labor productivity, and value added productivity. The ANOVA analysis method was used to analyze the productivity difference according to the frequency factor and the environmental factors of the Regional base public hospitals. Finally, we conducted a hierarchical regression analysis to examine the productivity variables affecting profitability. The results of this study showed that there were differences in productivity due to environmental factors such as hospital size, competition in the local medical market, and differences in management performance. The difference in productivity and profitability depending on the environmental factors suggests that it is difficult for Regional base public hospitals in each regional base to perform a balanced public service. In order to overcome this, it is necessary to provide balanced medical services such as government financial support expansion, regional medical demand forecasting and facility infrastructure construction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2710-2723
• /
• 1996

2-dimensional scattering problem of electromagnetic waves by a periodic strip grating on a grounded dielectric slab in case of oblique incidence and arbitrary polarization is analyed by the vector Floquet modal expansion method. Solution convergence versus number of Chebyshev polynomial terms representing the unknown strip current density and number of space harmonics is examined, and some numerical results such as variation of power of significant space harmonics(scattered mode) are compared with those obtained by previous method. In particaluar, the relationship between Bragg blazing phonmena and characteristics mode(current) on the srip is discussed in detail.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.48-55
• /
• 1997

Advances in VLSI technology have brought us completely new design principles for the high-performance switching fabrics including ATM switches. From a practical point of view, port scalability of ATM switches emerges as an important issue while complexity and performance of the switches have been major issues in the switch design. In this paper, we propose a cost-effective approach to modular ATM switch design which provides the good scalability. Taking advantages of both time-division and space-division switch architectures, we propose a practically implementable large scale ATM switch architecture. We present a scalable shared buffer type switch for a building block and its expansion method. In our design, a large scale ATM switch is realized by interconnecting the proposed shared buffer switches in three stages. We also present an efficient control mechanism of the shared buffers, synchronization method for the switches in each stage, and a flow control between stages. It is believed that the proposed approach will have a significant impact on both improving the ATM switch performance and enhancing the scalability of the switch with a new cost-effective scheme for handling the traffic congestion. We show that the proposed ATM switch provides an excellent performance and that its cell delay characteristic is comparable to output queueing which provides the best performance in cell delay among known approaches.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.75-78
• /
• 2007

The steel slag, a by-product which is produced by refining pig iron during the manufacture of steel, is mainly used as road materials after aging. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapidly-chilled method would prevent from generation of free-CaO in steel slag. Also, Molten steel slag rapidly-chilled by air in high speed becomes a fine aggregate of nearly spherical shape. This study dealt with the influence of the using rate of rapidly-chilled steel slag and polymer resin on fluidity of polymer concrete, as a results Since RCSS has spherical shape and high density, up to replacement ratio of 100%, increases concrete fluidity under same polymer content and decrease polymer content in order to secure the same fluidity

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.532-538
• /
• 2004

MEMS technology applying to the sensors and micro-electro devices is complete system. These microsystems are made by variable processes. Especially, the mentallization process has very important functions to transfer the power operating the sensor and signal induced from sensor part. But in the structures of MEMS the local stress concentration and deformation are often yielded by an irregular geometrical shape and different constraint. Therefore, this paper studies the effect of supporting type and thickness ratio about thin film of the substrate on the residual stress variation when the thermal loads is applied to the multi-layer thin film fabricated by metallization process. Specimens were made from several materials such as Al, Au and Cu. Then, uniform thermal load was applied, repeatedly. The residual stress was measured by FE Analysis and nano-indentation method using AFM. Generally, the specimen made of Al induced the larger residual stress than that of made of other materials. Specimen made of Cu and Au having the low thermal expansion coefficient induces the minimum residual stress. Similarly, the lowest indentation length was measured by nano-indentation method in the Si/Au/Cu specimen. Particularly, clusters are created in the specimen made of Cu by thermal load and the indentation length became increasingly large by cluster formation.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.1
• /
• pp.41-48
• /
• 2017

In this study, we proposed GIS-based Regional Crime Prevention Index (RCPI) development method designed to support local governments with systematic crime prevention activities. The public interest in safe urban environment is increasing rapidly. The government is putting efforts into crime prevention activities to eliminate the criminal opportunities in advance. CPTED is method to prevent crimes in the city by improving environmental factors that cause crime. It is used by local governments to promote the crime prevention activities centering on the expansion of CCTVs and street lamps and the improvement of street environment. However, most policies were terminated as one-off programs and it is necessary to monitor the effect of such policies on a continuous basis. In order to alleviate issues, this study proposed RCPI as part of crime safety assessment in urban environments. The estimation of RCPI in City A of Gyeonggi-do showed relative differences in 31 districts (dong), indicating that it is also possible to evaluate the crime safety in the local community on the level of the administrative dong, the smallest administrative district in the urban environments. As a crime map, the RCPI will be used effectively as he reference to support the decision making process for local government in the future.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.187-194
• /
• 2015

Various linguistic knowledge resources are required in order that machine can understand diverse variation in natural languages. This paper aims to devise an automatic construction method of linguistic resources by reflecting characteristics of online contents toward continuous expansion. Especially we focused to build NE(Named-Entity) dictionary because the applicability of NEs is very high in linguistic analysis processes. Based on the investigation on Korean Wikipedia, we suggested an efficient construction method of NE dictionary using the syntactic patterns and structural features such as metadatas.