• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.22-28
• /
• 1999

The existing CREG-VP, a technique to compensate the successive cell losses caused by traffic congestion using the FEC method on the Vp, has the merits of the short average encoding decoding time and the compatibility with the ATM standard cell format, but it has the restriction in the number of regenerable cells. In this thesis, we propose a scheme to efficiently regenerate the cell losses even in the burst traffic property by the expansion of the CREG-VP. The proposed scheme improves the detection capability of the lost cells by changing the CRP and the regeneration performance of the successive cells by using the interleaved parity cell. The simulation result shows that the proposed method produces much improvements compared with the existing ones in the cell loss rate reduction factor.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.269-280
• /
• 2017

One major concern that has occupied the mind of the designers is a structural failure as result of stress concentration in the geometrical discontinuities. Understanding the effective parameters contribute to stress concentration and proper selection of these parameters enables the designer get to a reliable design. In the analysis of perforated isotropic and orthotropic plates, the effective parameters on stress distribution around holes include load angle, curvature radius of the corner of the hole, hole orientation and fiber angle for orthotropic materials. This present paper tries to examine the possible effects of these parameters on stress analysis of infinite perforated plates with central quasi-square hole applying grey wolf optimizer (GWO) inspired by the particular leadership hierarchy and hunting behavior of grey wolves in nature, and also the present study tries to introduce general optimum parameters in order to achieve the minimum amount of stress concentration around this type of hole on isotropic and orthotropic plates. The advantages of grey wolf optimizer are stout, flexible, simple, and easy to be enforced. The used analytical solution is the expansion of Lekhnitskii's solution method. Lekhnitskii applied this method for the stress analysis of anisotropic plates containing circular and elliptical holes. Finite element numerical solution is employed to examine the results of present analytical solution. Results represent that by selecting the aforementioned parameters properly, fewer amounts of stress could be achieved around the hole leading to an increase in load-bearing capacity of the structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1510-1517
• /
• 1995

A theoretical method is described to simulate the propagation of turbulent premixed flames in a closed vessel. The objective is to develop and test an efficient technique to predict the propagation speed of flame as well as the geometric structure of the flame surfaces. Flame is advected by the statistically generated turbulent flow field and propagates as a wave by solving twodimensional Hamilton-Jacobi equation. In the simulation of the unburned gas flow field, following turbulence properties were satisfied: mean velocity field, turbulence intensities, spatial and temporal correlations of velocity fluctuations. It is assumed that these properties are not affected by the expansion of the burned gas region. Predictions were compared with existing experimental data for flames propagating in a closed vessel charged with hydrogen/air mixture with various turbulence intensities and Reynolds numbers. Comparisons were made in flame radius growth rate, rms flame radius fluctuations, and average perimeter and fractal dimensions of the flame boundaries. Two dimensional time dependent simulation resulted in correct trends of the measured flame data. The reasonable behavior and high efficiency proves the usefulness of this method in difficult problems of flame propagation such as in internal combustion engines.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.82-94
• /
• 2009

In this study, I suggest dyed-Glued laminated woods by using birch woods which are relatively cheaper than others. Since the dyed-Glued laminated woods which have the various colors to satisfy people's tastes and the dignified grains in the old woods enable us to product freely, these can provide us with stability of supply through replacing rare materials. The making wooden furniture designed with dyed-Glued laminated woods has these following characteristics. (1) This method which uses various colored woods can fulfill consumers' tastes through dyeing wooden plates, instead of using domestic woods which have limited colors-white, yellow and black. (2) Gathering wooden plates made by setting them into various frames enables us to get in large quantities of the materials with good grains, which we can only take from old woods. (3) Producing culture products using various colors and grains has enabled us to satisfy consumers and to create pro-environmental pieces. In conclusion, this study can be an alternative idea to forest resources which have been decreasing, and be an application method of using cheaper birch woods as well. Gathering and dyeing wooden plates might bring about the economic effect and be of much help to the expansion as furniture materials as well as interior ones.

• Journal of the Korean Ceramic Society
• /
• v.50 no.2
• /
• pp.127-133
• /
• 2013

Porcelain with high thermal shock resistance was successfully fabricated by a lithium solution infiltration method with a lithium hydroxide solution. Lithium hydroxide solutions having various lithium concentrations were infiltrated into pre-sintered porcelain bodies. The porcelain sample infiltrated by the 9 wt% lithium solution and heat treated at $1250^{\circ}C$ for 1 h showed a low thermal expansion coefficient of $1.0{\times}10^{-6}/^{\circ}C$ with excellent thermal shock resistance. The highly thermally resistant porcelain had a well-developed ${\beta}$-spodumene phase with the general phases observed in porcelain. Furthermore, the porcelain showed a denser structure of $2.41g/cm^3$ sintering density and excellent whiteness in comparison with commercial thermally resistible porcelains. The lithium hydroxide in the samples readily reacted with moisture, and liquid phase reactants were formed during the fabrication process. In the case of an excess amount of lithium in the sample body, the lithium reactants were forced to the surface and re-crystallized at the surface, leaving large pores beneath the surface. These phenomena resulted in an irregular structure in the surface area and led to cracking in samples subjected to a thermal shock test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.67-74
• /
• 1999

Self-Boring Pressuremeter Test(SBPT) is known to be the most effective in-situ test method which can reliably determine consolidation characteristics as well as deformation modules and untrained shear strength. In order to derive the coefficient of consolidation using SBPT results it is necessary to obtain the dissipation behavior from the pore pressure change with time during constant radial strain(generally 10%) and to derive the reliable time factor(Τ) from the analytical method which considers the real in-situ conditions. As previous studies on time factor are based on the assumptions of plane strain condition that the membrane of SBP is infinite, of untrained condition during the expansion of the probe and of elastic soil behavior during consolidation, these analyses can't consider the real boundary conditions and the real soil behaviour. In this study, consolidation analysis similar to real in-situ conditions including test procedure is conducted using finite element program which employs MCC model and Biot theory. Time factor considering the effects of finite membrane length, the total pressure change during consolidation and partial drainage is proposed and compared with previous results.

• Journal of Korean Academy of Nursing
• /
• v.47 no.2
• /
• pp.222-232
• /
• 2017

Purpose: This study was done to develop a children's sex education program for the parents of lower elementary grade students and to evaluate its effects on sexual knowledge, gender role attitude, parent efficacy for child's sex education, and marital consistency. Methods: A quasi-experimental with a non-equivalent control group pretest-posttest design was used. The participants were 29 couples (58 parents, experimental group=28, control group=30) from G city. The 5-week (5-session) program was developed based on 'A theory of protection: parents as sex educators' and used the case-based small group learning method. Data were collected during July and August 2015. The characteristics of the program developed in the present study were a theoretical-based, client-centered, multi-method. Results: After the intervention, the experimental group showed a significant improvement in sexual knowledge, gender role attitudes, parent efficacy for child's sex education, and marital consistency, compared to the control group. The effect sizes of the program were .64 (knowledge), .65 (gender role attitudes), and .68 (parent efficacy). Conclusion: The results of this study provided implications for the parents as effective sex educator and the role expansion of school health nurses.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.3-12
• /
• 2016

Recently, construction industry shows active expansion in overseas construction market. But the active work limited in construction work, on the other hand, design-drawing work is evaluated shortage of competitive power. So this study aim to improve the competitive of 'domestic design-drawing work'thorough objective evaluation. Objective evaluation is consist of 'design attribution'. Design attribution is based on the execution drawing and complement by existing reasearch, expert interview. And then, list up the 'design attribution' evaluation list to carry out a survey targeting hands-on worker. Survey is consist of 'Likert 5-point scale, FMEA method'. As a result, construction company and design company show different opinions in both relative position evaluation and importance evaluation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.135-143
• /
• 2000

The vision system is easy to use the exclusive use as a independent computer system but it is not much popularization by reason of expensive and difficult to adapt to the various fields, because it is easy to the existed computer system, the price is cheap and also it can use to the various measurement purpose which user wanted and programed. The measurement method of the vehicle axle casing nut welding part is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual length of the standard specimen and the length of image, to measure the ratio between the actual product and the camera image. A defect is found by the assembled visual inspection system. The inspection algorithm which estimates the quality of welded product is developed and also, the software program which processes the automatic test function of the inspection system. We make the foundation of the inspection automatic system and we will help to apply other welding machine.