• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.706-712
• /
• 2006

The present volume should address the unique method of deterioration analysis tailorly applicable to the study of traction motor, not existent maintenance works system with the time period standard, such as regular inspection works, maintenance works, selection for the repair works. The present volume has executed various field experiments in this method, should propose the procedures and baselines for anticipating the life expansion of traction motor and building precautional maintenance system for it, on the basis of these field experiments. The improvement scheme of traction motor maintenance system in the present volume should be to keep the out-of-order rate from unexpectedly soaring and make the cost-reduction effect through better maintenance work method.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.31-35
• /
• 2001

By applying the Boundary Integral Equation Method (BIEM) to obliquely incident for Rubble Mound Breakwater (RMB), wave reflection and transmission the coefficients are studied numerically. The validity of and the present BIEM is confirmed by comparing it with 1)numerical results of the eigenfunction expansion method of Dalrymple et al.(1991), and 2)numerical results of the BIEM of Kojima et al.(1988). Therefore, the characteristics of RMB for obliquely incident waves are investigated according to the variations of the wave period, equivalent linear nondimensional friction coefficient and direction of incident waves. It is revealed that the wave transformations of obliquely incident waves are different from those of normally incident waves.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.7
• /
• pp.453-457
• /
• 2005

With the expansion of Internet, a variety of image databases are widely used and it is needed to select the part of an image what he wants. In contents-based image retrieval system, Zernikie moment and ART Descriptors are used fur shape descriptors in MPEC-7. This paper presents a fast computation method to determine the radius of a bounding circle that encloses an object in a binary image. With conventional methods, the whole area of the image should be scanned first and the distance from every pixel to the center point be computed. The proposed 4-directional scan method and fast circle-drawing algorithm is utilized to minimize the scanning area and reduce the number of operations fur computing the distance. Experimental results show that proposed method saves the computation time to determine the radius of a bounding circle efficiently.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.208-209
• /
• 2017

When controlling a three-phase inverter that drives AC motor, it is important to know the value of the current. In this case, shunt sensing methods are known as low cost and useful performance. However, for certain swithcing condition, immeasurable areas exist and it is necessary to reconstruct the current in the area. This paper proposes a reconstruction method using voltage injection in synchronous coordinates system at the area, and verify the validity of the method through simulation.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.1027-1034
• /
• 2016

This paper proposes a sum of squares (SOS) method for anti-swing control of overhead crane system using HOSM (High-Order Sliding-Mode) observer. By representing the dynamic equations of overhead crane as the polynomial dynamic equations via Taylor series expansion, the control input is obtained from the converted polynomial dynamic equations by numerical tool SOSTOOL. Since the actual crane systems include disturbance such as wind and friction, we propose a method to compensate for the disturbance by estimating the disturbance using HOSM observer. Numerical simulations show the effectiveness and the applicability of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.946-949
• /
• 2003

In this paper, a DDFS(Direct Digital Frequency Synthesis)chip has been designed focusing on the reduction of ROM size and implemented using FPGA. When calculating the sine value for the input phase value, we used the Taylor series expansion approximation method to reduce the number of addresses of ROM. We also used the piecewise straight line approximation method, ie, the stored value int the ROM is the difference of the sine value and the straight line approximation. Using this method, we could reduce four bits for each ROM data.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1143-1156
• /
• 2017

This paper describes recent development activities of the GENESIS code, which is a transport code for heterogeneous three-dimensional geometry, focusing on applications to reactor core analysis. For the treatment of anisotropic scattering, the concept of the simplified Pn method is introduced in order to reduce storage of flux moments. The accuracy of the present method is verified through a benchmark problem. Next, the iteration stability of the GENESIS code for the highly voided condition, which would appear in a severe accident (e.g., design extension) conditions, is discussed. The efficiencies of the coarse mesh finite difference and generalized coarse mesh rebalance acceleration methods are verified with various stabilization techniques. Use of the effective diffusion coefficient and the artificial grid diffusion coefficients are found to be effective to stabilize the acceleration calculation in highly voided conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.18-24
• /
• 1999

Microcellular foaming is being researched as a method of maintaining and improving the mechanical characteristics of plastics as well as saving the material costs. This can not only improve the mechanical properties including impact strength of plastic by producing cells with the size of few ${\mu}$m diameters within the plastic, but also can save the material cost of plastic products with the general volumetric expansion of 2 to 10 times. But quite a long time is required for the gas to be absorbed in the plastic. Therefore consistent research should be done to reduce the saturation time of gas into the plastic and this paper provides the method of water microcellular foaming process as one of the methods using the high diffusivity of water. In addition, we can improve impact property of foamed plastic by using this method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.3 s.246
• /
• pp.215-221
• /
• 2006

A stereoscopic particle tracking velocimetry (SPTV) technique based on the 2-frame hybrid particle tracking velocimetry (PTV) method was developed. The expansion of 2D PTV to SPTV is facilitated by the fact that the PTV method tracks individual particle centroids. To evaluate the performance and measurement accuracy of the present SPTV technique, it was applied to flow images of rigid body translation and synthetic standard images of jet shear flow and impinging jet flow. The data processing routine and measurement uncertainty of the SPTV technique are compared with those of conventional stereoscopic particle image velecimet.y (SPBV). In addition, the centroid translation effect of 2D particle image velocimetry (PIV) is defined and its effect on SPIV measurements is discussed. Compared to the SPIV method, the SPTV technique has inherited merits of concise and precise velocity evaluation procedures and provides better spatial resolution and measurement accuracy.