• Geomechanics and Engineering
• /
• v.30 no.2
• /
• pp.153-167
• /
• 2022

This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

• Journal of Fashion Business
• /
• v.26 no.6
• /
• pp.94-104
• /
• 2022

The purpose of this study is to analyze the art world's perspective on popular art and the contact point with pure art and to present the requirements of fashion as a popular art. To analyze the artistic value of fashion, this study analyzed and presented the requirements of art by linking the innate characteristics of fashion premised on mass consumption of popular art. The research method consisted of content analysis focusing on books and papers on art and fashion. A critical perspective on expansion of the artistic field amid the blurred boundaries of art is the basis of a critical comparison between popular art and avant-garde art and a critique of popular art as opposed to value-oriented art. Conversely, as a point of contact with popular art with fine art, art is discussed against the ideological strategy of fine art and the shift in hegemony brought about by erosion of the barrier between art and everyday life. In addition, the non-essentialist perspective contradicts the division theory of popular art. The requirements of fashion as a popular art were analyzed based on the value of self-expression through the aesthetic pursuit of creativity and aesthetic expression, discourse as art, and expansion of modern art from the inessentialist perspective of popular art.

• Journal of Arbitration Studies
• /
• v.32 no.3
• /
• pp.93-109
• /
• 2022

Cosmetics are products that consumers use every day to maintain or improve the health of their skin and hair. Therefore, the expansion of the cosmetics market leads to the expansion of disputes over cosmetic damage. Along with constant social changes, new conflicts continue to arise. In order to resolve these disputes, various consumer dispute resolution organizations and methods are required. Therefore, Alternative Dispute Resolution (ADR), an alternative method that can provide a reasonable judgment on problems that occur during the manufacture and distribution of cosmetics with expert knowledge of the industry, is required. Korea resolves disputes between consumers and manufacturers caused by cosmetics through the ADR of the Korea Cosmetics Association and the Korea Consumer Agency. It handles disputes related to accidents caused by cosmetics, offers consultation on consumer complaints on cosmetics and provides information on accidents and safety related to cosmetics. It is not possible to completely eradicate disputes from cosmetic damages. Therefore, it is necessary to expand and efficiently operate the cosmetic ADR system for consumers. In this study, the current status of cosmetic damage disputes and damage relief and the role of the domestic ADR system were reviewed. Consumers should be easily relieved from damage caused by cosmetics. By accumulating important precedents with an efficient cosmetic damage dispute resolution system, disputes over cosmetic damage should be smoothly resolved.

• Geomechanics and Engineering
• /
• v.32 no.1
• /
• pp.85-96
• /
• 2023

Microbially induced carbonate precipitation (MICP) is extensively discussed as a promising topic for ground stabilization. The practical effect of stabilizing the expansive soil is presented in this paper with a logical process from the bacterial activity to the treatment technology. Temperature, pH, shaking frequency, and inoculation amount are discussed to evaluate the bacterial activity. The physic-mechanic properties are also evaluated to discuss the effect of the MICP process on expansive soil. Results indicate that the MICP method achieves the mitigation of expansion. The treated soil has a low proportion of fine particles (< 5 ㎛), the plasticity index significantly decreases, and strength values improve much. MICP process has a significant cementation effect on the soil matrix. Moreover, the infiltration model test presents the coating effect on the topsoil. According to the relation between the CaCO₃ content and the treatment effect, the topsoil has better treatment than the deeper soil.

• Journal of Environmental Science International
• /
• v.32 no.3
• /
• pp.149-159
• /
• 2023

This study aimed to improve the level of satisfaction and service quality of a forest experience education program for vulnerable social groups by administering a survey problems of the program and suggested improvements. 428 participants in the program. Reliability analysis of the survey yielded values of, Cronbach's α value was higher than 0.8 for all items, indicating very high reliability. Importance-performance analysis (IPA), a method of measuring and comparing the degree of satisfaction, found two factors: "first need for correction" which included "diversity of programs" and "professionalism of programs"; and "the need for sustained effort" which included "benefits of programs", "the role of program instructors" and "the interest of programs". Previously, forest experience education focused on programs involving base expansion and promotion, or quantitative expansion education. Therefore, this study is meaningful in providing basic data on forest experience education for vulnerable social groups.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.151-157
• /
• 2023

Integrating dielectric materials into LTCC is a convenient method to increase the integration density in electronic circuits. To enable co-firing of the high-k and low-k dielectric LTCC materials in a multi-material hetero-laminate, the shrinkage characteristics of both materials should be similar. Moreover, thermal expansion mismatch between materials during co-firing should be minimized. The alternating stacking of an LTCC with silica filler and that with calcium-zirconate filler was observed to examine the use of the same glass in different LTCCs to minimize the difference in shrinkage and thermal expansion coefficient. For the LTCC of silica filler with a low dielectric constant and that of calcium zirconate filler with a high dielectric constant, the amount of shrinkage was examined through a thermomechanical analysis, and the predicted appropriate fraction of each filler was applied to green sheets by tape casting. The green sheets of different fillers were alternatingly laminated to the thickness of 500 ㎛. As a result of examining the junction, it was observed through SEM that a complete bonding was achieved by constrained sintering in the structure of 'calcium zirconate 50 vol%-silica 30 vol%-calcium zirconate 50 vol%'.

• Advances in aircraft and spacecraft science
• /
• v.10 no.5
• /
• pp.439-455
• /
• 2023

Free surface fluid oscillation in prolate spheroidal tanks has been investigated analytically in this study. This paper aims is to investigate the sloshing frequencies in spheroidal prolate tanks and compare them with conventional cylindrical and spherical containers to select the best tank geometry for use in space launch vehicles in which the volume of fuel is very high. Based on this, the analytical method (Fourier series expansion) and potential fluid theory in the spheroidal coordinate system are used to extract and analyze the governing differential equations of motion. Then, according to different aspect ratios and other parameters such as filling levels, the fluid sloshing frequencies in the spheroidal prolate tank are determined and evaluated based on various parameters. The natural frequencies obtained for a particular tank are compared with other literature and show a good agreement with these results. In addition, spheroidal prolate tank frequencies have been compared with sloshing frequencies in cylindrical and spherical containers in different modes. Results show that when the prolate spheroidal tank is nearly full and in the worst case when the tank is half full and the free fluid surface is the highest, the prolate spheroidal natural frequencies are higher than of spherical and cylindrical tanks. Therefore, the use of spheroidal tanks in heavy space launch vehicles, in addition to the optimal use of placement space, significantly reduces the destructive effects of sloshing.

• Journal of Korea Water Resources Association
• /
• v.51 no.spc
• /
• pp.1079-1089
• /
• 2018

The majority of existing studies for quantifying uncertainties in climate change impact assessments suggest only the uncertainties of each stage, and not the total uncertainty and its propagation in the whole procedure. Therefore, this study has proposed a new method, the Uncertainty Delta Method (UDM), which can quantify uncertainties using the variances of projections (as the UDM is derived from the first-order Taylor series expansion), to allow for a comprehensive quantification of uncertainty at each stage and also to provide the levels of uncertainty propagation, as follows: total uncertainty, the level of uncertainty increase at each stage, and the percentage of uncertainty at each stage. For quantifying uncertainties at each stage as well as the total uncertainty, all the stages - two emission scenarios (ES), three Global Climate Models (GCMs), two downscaling techniques, and two hydrological models - of the climate change assessment for water resources are conducted. The total uncertainty took 5.45, and the ESs had the largest uncertainty (4.45). Additionally, uncertainties are propagated stage by stage because of their gradual increase: 5.45 in total uncertainty consisted of 4.45 in emission scenarios, 0.45 in climate models, 0.27 in downscaling techniques, and 0.28 in hydrological models. These results indicate the projection of future water resources can be very different depending on which emission scenarios are selected. Moreover, using Fractional Uncertainty Method (FUM) by Hawkins and Sutton (2009), the major uncertainty contributor (emission scenario: FUM uncertainty 0.52) matched with the results of UDM. Therefore, the UDM proposed by this study can support comprehension and appropriate analysis of the uncertainty surrounding the climate change impact assessment, and make possible a better understanding of the water resources projection for future climate change.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.327-332
• /
• 2003

A new discretization method for nonlinear system with time-delay is proposed. It is based on the well-known Taylor series expansion and the zero-order hold (ZOH) assumption. We know that a discretization of linear system can be obtained with the ZOH assumption and within the sampling interval. A similar line of thinking is available in nonlinear case. The mathematical structure of the new discretization method is explored and under the structure, the sampled-data representation of nonlinear system including time-delay is computed. Provided that the discrete form of the single input nonlinear system with time-delay is derived, this result is easily extended to nonlinear system with multi-input time-delay. For simplicity two inputs are considered in this study. It is enough to generalize that of multiple inputs. Finally, the time-discretization of non-affine nonlinear system with time-delay is investigated for apply all nonlinear system

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.2-7
• /
• 2008

A highly efficient moving least squares finite difference method (MLS FDM) for heat transfer analysis of composite material with interface. In the MLS FDM, governing differential equations are directly discretized at each node. No grid structure is required in the solution procedure. The discretization of governing equations are done by Taylor expansion based on moving least squares method. A wedge function is designed for the modeling of the derivative jump across the interface. Numerical examples showed that the numerical scheme shows very good computational efficiency together with high aocuracy so that the scheme for heat transfer problem with different heat conductivities was successfully verified.