• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2015

This study is designed to identify the changes of the elderly's residential environment and life satisfaction in rural area during the past 20 years. Data from the survey of Ministry of Health and Welfare conducted in 1994, 1998, 2004, 2008, and 2014 were used for the analysis. The subjects of the study included a sample of 11,019 respondents who represent aged 65 and older in Korea rural area. The result of analysis indicated that; First, the average age of the rural elderly continuously increased and the rural elderly that hope to live with their grown-up children gradually declined. It means that the social responsibility of supporting the elderly is steadily expanding. Second, the ratio of rural elderly living with their children is decreased from 43% in 1994 to 11% in 2014, whereas the single elderly household who are living alone or living with spouse increased. And more elderly live with married children in order to help their children rather than receiving help from them. Third, the frequency of intercourse with their children tended to decline gradually, in contrast with communication frequency with them mounted steadily during the past few decades. Finally, the factors influencing the life satisfaction of rural elderly was health status, economic level, child relationship with them, and residential environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.255-258
• /
• 2009

Leading developed countries have studied energy self-sufficient houses such as zero or low energy buildings to reduce energy consumption for buildings since the early 1990s. Moreover, some developed countries have actually constructed self-sufficient houses and operated them for demonstration, expanding use of such houses. Korea has also established Zero Energy Solar House(ZeSH) and studied energy independence. Therefore, this study analyzed research result regarding ZeSH, self-sufficient energy house hold of Korea, found out technologies used for heating energy independence, used building interpretation program(ESP_r) to evaluate performance of each factors and analyzed energy reduction quantitatively. Results from the research are as follows: Reduction rate of actual detached house's heating load was also analyzed quantitatively depending on application of each technology. When each factor was applied step-by-step, annual reduction rate of heating load depending on increase in insulation thickness reached 6.6~22.2 %. Annual reduction rate of heating load depending on increase insulation thickness, and change in window heating performance and area ratio reached 31.5 %. Annual reduction rate of heating load through high-sealing and high-insulation depending on change in leakage rate reached 40.0~88.9 %. Annual reduction of heating load, when Mass Wall and attached sun space was applied were applied reached 28.5~39.2 %, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.1
• /
• pp.249-257
• /
• 2020

This paper focused on the level of managerial centralization on chief executive officer (CEO) as a factor to affect the shared growth activities of corporate. As service corporations are becoming active in shared growth activities recently, this paper thus used CEO. Pay Slice (CPS) information to measure the level of managerial centralization on CEO of service corporation and tested the influence of the level of managerial centralization on whether shared growth activities are executed and the level of such activities respectively. The result of test shows that companies with high managerial centralization on CEO are more passive toward shared growth activities than those without such centralization. This can be interpreted that a CEO with more powerful influence may consider shared growth activities as to be negative and take a passive attitude to them. On the other hand, such result was supported by additional analysis with companies committing shared growth activities as well. This paper is expected to contribute to bring about interest on shared growth activities as the gap between major companies and small and medium sized companies is currently expanding in terms of operating profit ratio and even salary of employees.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.55-66
• /
• 2014

Under high agricultural automation in rice farming, cultivation acreage expansion can be considered for the economies of scale. Also, considering the circumstances of higher ratio in leased farms than independent farms, Long-term Leasing Business of Farmland can be the most public and transparent method to expand cultivation acreage for lease farming. Therefore, this research observes the various factors such as application motives, satisfaction, and demands of Long-term Leasing Business of Farmland, which the importance is on the rise and serves as a means to increase agricultural expansion, as well as its operational performance analysis. The research results and implications are as follows. Long-term Leasing Business of Farmland have positive effects such as ensuring stable farming through documental contract, providing convenience because the lease contractor requires no meetings during the contract period, providing opportunities to expand the farm size, and acquiring economical gain which is linked to satisfaction aspects of the businesses. On the other hand, demands such as strengthened business advertisement, writing business documents by correlating with related organizations, and clear lease price configuration were made by the businesses. To bring improvements, this research proposes; 1) expanding support to related businesses, 2) providing convenience through related organization correlations, and 3) configuring clear lease prices considering the regional conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.217-225
• /
• 2008

A new micro reformer system consisted of a micro reformer, a microcombustor and a micro evaporator was studied experimentally and computationally. In order to satisfy the primary requirements for designing the microcombustor integrated with a micro evaporator, i.e. stable burning in a small confinement and maximum heat transfer through a wall, the present microcombustor is simply cylindrical to be easily fabricated but two-staged (expanding downstream) to feasibly control ignition and stable burning. Results show that the aspect ratio and wall thickness of the microcombustor substantially affect ignition and thermal characteristics. For the optimized design conditions, a premixed microflame was easily ignited in the expanded second stage combustor, moved into the smaller first stage combustor, and finally stabilized therein. A micro reformer system integrated with a modified microcombustor based on the optimized design condition was fabricated. For a typical operating condition, the designed micro reformer system produced 22.3 sccm hydrogen (3.61 W in LHV) in an overall efficiency of 12%.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.151-159
• /
• 2011

Due to the Korean government's renewable energy support policy such as the renewable energy utilization building certificate and enlarging the compulsory ratio of investment on the public building, the rooftop photovoltaic projects are expanding rapidly. It is very important for the rooftop photovoltaic projects to analyze the shading effect of the adjacent structures or own facilities. But, the photovoltaic arrangements are planned by the experience of the designers or simple graphic tools. The purpose of this study is to build the process model for optimizing of rooftop photovoltaic arrangement based on three-dimensional geo-spatial information.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.101-106
• /
• 2012

The press bulging process is very useful and productive method to produce round-type mechanical components which have not been able to be manufactured because of limitation of the conventional press technology. The application of the press bulging process has expanded very quickly in the hydraulic and electronic industry and more recently it has been used to produce other mechanical parts such as the automobile and shipping parts. This expanding application also has brought some unsolved problems and leads many researchers to put their effort into the die design of the press bulging process. In this study, to obtain the optimum die shape for the press bulging process, various process parameters have been considered such as corner radius, bulging height, pressing length, and forming load, etc. The main interest of this paper is to verify the press bulging process which has more than 4.0 in height-length ratio. From this aspect, Finite Element analysis shows great ability to simulate the precise deformation process and gives us manufacturing database. Consideration of strain, stress, and strain-rate for the various cases has been also taken to keep the forming load within a particular range.

• Hwankyungkyoyuk
• /
• v.25 no.2
• /
• pp.180-194
• /
• 2012

Green campus means the environmentally-conscious universities that are trying to increase campus sustainability by reducing carbon emissions, expanding eco-friendly activities. This study was carried out to compare the recognition level on green campus between Korea and Japan universities. For investigating the recognition level of students and faculties on green campus, the questionnaire surveys were conducted by personal interviews in Korea and Japan, separately. The 40% and 68% respondents in Korean A and B universities, respectively, pointed out the energy issue as one of the serious environmental problems while the corresponding ratio among Japanese respondents was 44% and 34%. The participation intention for green campus movement in Japanese universities was higher than Korean universities. The 70% or 52% of Korean students in A and B universities, respectively, replied that they did not participate the green campus movement. It is needed to strengthen the educational program to achieve the sustainability of campus in Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.370-376
• /
• 2011

Recently, the application range of plastic gears is widely expanding by the development of engineering plastics with good mechanical properties. Plastic gears have excellent performances such as light weight, water resistance and vibration absorbing ability for metallic gears. In this study, the optimization of injection molding process was done for the large disk type plastic gears of auto phoropter. Design Of Experiment (Taguchi method) was adopted to find a tendency of molding conditions that influence the flatness of disk type gear. Four main factors for molding conditions were selected based on injection temperature, filling time, packing pressure and mold temperature. Also, Filling, packing and cooling analyses were carried out to evaluate Z directional deflection of large disk type gear by using the simulation software (Moldflow) based on the DOE. From the results, it was found that the injection temperature and packing pressure are the most sensitive parameters for the Z directional deflection of large disk type gears.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.212-218
• /
• 1996

The concrete pipe used to distribute irrigation water to the right place now available is commonly made up of cement , sand, earth, pebble, etc. These materials with right ratio and right amount of water were mixed and squeezed through the pipe-making machine called vertical squeezed pipe-making machine, and then a cement prefabricated pipe is produced . This kinds of pipe has been expanding by leaps and bounds. Being little cement contents and low cost, the length of pipe is 1.0m or so with weight of 50kg, which is easy to be made and to be transported. The demolish pressure of it is 0.2 MPa or so, which meets the needs of agriculture irrigation . The buried pipe irrigation system, has been popularized in Jining Municipal , Shandong Province. By the year of 1995 , the irrigation area under pipe conveyancesystem usign this type of pipe has reached 74000 hectares. By calculation, about 27.7million ㎥ water, 2.88 million kWh power , 0.167 million man power and 1528 hectares cu tivated land will be saved one year, adding value of agriculture output increased by 10 million kg. The total economic benefits amount to 0.92 million US$ a year. The paper presents the pipe making course and its application on a large scale area.