• Journal of Korean Foot and Ankle Society
• /
• v.15 no.3
• /
• pp.132-138
• /
• 2011

Although first generation total ankle replacement (TAR) had high failure rates, recent investigations have reported good results of the newer generations of TAR due to advances in implant designs and techniques. Patient selection is critical to performing TAR to obtain promising outcomes and to decrease complication rate. As the current concepts of correcting the accompanying deformity have been established, TAR in moderate to severe varus deformity of the ankle result in favorable outcomes and indications for TAR are expanding. Correction of deformity and hindfoot fusion should be performed in conjunction with TAR if needed. If radiolucency around components or osteolysis is progressive during follow-up, CT should be carried out as a confirmative diagnostic method. TAR is an effective treatment modality alternative to ankle fusion. However, we should recognize that TAR is a demanding procedure, which requires accurate techniques, enough experience, and preoperative plan for a concomitant deformity.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1756-1758
• /
• 2001

Recently, ozone is utilized in various fields and its needs are expanding. In this paper, fluorescent discharge type ozonizer has been designed and manufactured. Ozone discharge and generation characteristics have been investigated in accordance with a sort of internal electrodes, output voltage of power supply. flow rate and discharge power. Air has been used as the supplied gas of the ozonizer.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1113-1116
• /
• 2003

This review article gives a comprehensive compilation of recent developments in low temperature deposited poly Si flms, also known as microcrystalline silicon. The development of various ion energy suppression techniques for plasma enhanced chemical vapour deposition and ionless depositions such as HWCVD and expanding thermal plasma, and their effect on the material and solar cell efficiencies are described. A correlation between ef.ciency and the two most important process parameters, i.e., growth rate and process temperature is carried out. Finally, the application of these poly Si cells in multijunction cell structures and the best efficiencies worldwide by various deposition techniques are discussed.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.1-8
• /
• 1999

This paper proposes an ATM switch architecture called Output Queued Batcher-Banyan switch (OQBBS). It consists of a Sorting Module, Expanding Module, and Output Queueing Modules. The principles of channel grouping and output queueing are used to increase the maximum throughput of an ATM switch. One distinctive feature of the OQBBS is that multiple cells can be simultaneously delivered to their desired output. The switch architecture is shown to be modular and easily expandable. The performance of the OQBBS in terms of throughput, cell delays, and cell loss rate under uniform random traffic condition is evaluated by computer simulation. The throughput and the average cell delay are close to the ideal performance behavior of a fully connected output queued crossbar switch. It is also shown that the OQBBS meets the cell loss probability requirement of $10^{-6}$.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.2
• /
• pp.143-148
• /
• 2005

Korea dairy market has greatly expanded recently by growing up the consumer's demands of high quality of milk products and their functionality due to expanding of well being lift trends. However, life cycle of dairy products is shorter than ever before and low birth rate is a common trend of Korean people. Moreover due to the national economy crisis, most of dairy companies are faced with the pressure of new milk products development and their sales. This paper deals with the development of Korea dairy industry by chronological order and deals with the future applicable new dairy foods and advanced dairy technology.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.470-474
• /
• 2000

Cold expansion of fastener holes is a mechanical process widely used in the aerospace industry. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses on the hole surface. The residual stress profile depends on the parameters of cold expansion, which are, expanding rate, inserting direction of mandrel, material properties etc. and the method to confirm this profile is only measurement by X-ray diffractometer. Despite its importance to aerospace industries, little attention has been devoted to the accurate modelling of the process. In this paper, Two-dimensional axisymmetric finite element simulations have been conducted for the cold expansion in an aluminium plate in order to predict the magnitude and distribution of the residual stress and plastic deformation. Maximum compressive residual stress could be increase about 7 percent using the 2-step cold expansion method.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.910-922
• /
• 2018

Conventional battery state-of-charge (SoC) estimation methods either involve sophisticated models or consume considerable computational resource. This study constructs an enhanced coulomb counting method (Ah method) for the SoC estimation of lithium-ion batteries (LiBs) by expanding the Peukert equation for the discharging process and incorporating the Coulombic efficiency for the charging process. Both the rate- and temperature-dependence of battery capacity are encompassed. An SoC mapping approach is also devised for initial SoC determination and Ah method correction. The charge counting performance at different sampling frequencies is analyzed experimentally and theoretically. To achieve a favorable compromise between sampling frequency and accumulation accuracy, a frequency-adjustable current sampling solution is developed. Experiments under the augmented urban dynamometer driving schedule cycles at different temperatures are conducted on two LiBs of different chemistries. Results verify the effectiveness and generalization ability of the proposed SoC estimation method.

• Journal of Distribution Research
• /
• v.5 no.2
• /
• pp.91-105
• /
• 2001

Wholesale club is one of the fastest expanding retailer formats. Given its key features such as limited assortment and no promotion policy, the current paper provides a theory on why the wholesale clubs charge their members fixed annual fees. In a competitive setting with supermarkets, the proposed model demonstrates that the membership fee is the optimal reaction of wholesale clubs to supermarkets" sales promotion. More specifically, the positive amount of annual fee is only justified under the condition that there exists consumer heterogeneity in consumption rate and when the supermarket exercises price promotion on the product that the wholesale club carries. This paper describes the competition in a stylized fashion and derives the optimal membership fee under a scenario where retail promotion is present. This study is valuable in that it offers a different explanation on wholesale club membership fee than conventional wisdoms such as cost sharing and that it provides insights to the managers who consider no-fee format.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.101-104
• /
• 1998

This study examined the effects of growth factors in TCM199 on bovine 1-cell embryos development in vitro. After 6 day to 11 day in culture, 15.8%(19/120), 15.3%(20/130), 21.8%(35/160), 27.0%(56/207), 26.3%(53/201) and 30.7%(40/130) of the 1-cell embryos developed into expanding blastocysts in su, pp.ementing TCM199 with control, insulin, IGF-I, IGF-II, FGF and EGF, respectively. Hatching rate of 1-cell embryos in su, pp.ementing TCM199 with FGF, EGF and IGF-II were 21.4%(53/247), 20.3%(42/206) and 16.8%(41/243), respectively. The beneficial effect of growth factors on embryo development in vitro could be duplicated. These data indicate that the presence of FGF, EGF or IGF-II in the culture medium is beneficial for embryo development in vitro and accelerate cell differentiation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1006-1025
• /
• 2012

Improving the quality of service in IP networks is a major challenge for real-time voice communications. In particular, packet arrival-delay variation, so-called "jitter," is one of the main factors that degrade the quality of voice in mobile devices with the voice-over Internet protocol (VoIP). To resolve this issue, a receiver-based enhanced timing recovery algorithm combined with active jitter estimation is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. Extensive simulations have shown that the proposed algorithm delivers high voice quality by pursuing an optimal trade-off between average buffering delay and packet loss rate.