• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.991-997
• /
• 2011

This paper deals with the basic principles and procedures involved in the steam-chest molding process used for manufacturing expanded polypropylene (EPP) bead foam. Steam-chest molding is an integral process for EPP technology. However, little research has been carried out on the processing conditions for steam-chest molding this process. The characteristics of EPP foam are energy absorption, multiple-impact protection, low weight, structural strength, and durability. In this study, the steam pressure in steam-chest molding was varied to determine the optimum conditions for manufacturing EPP foam. Moreover, annealing was performed after EPP-foam molding to prevent the shrinkage of the steam-molded product. It was possible to verify the mechanism of foam shrinkage by observing the change in weight with time at different annealing temperatures. Moreover, a tensile test and scanning electron microscopy (SEM) analysis were performed to support these experimental results. The dimensional stability of each molded product was investigated at different steam pressures.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.561-567
• /
• 2017

This study focused on estimating the low concentration of $NH_4{^+}-N$ removal by using simultaneous reaction of the adsorption and microbial nitrification with microbe-attached zeolite media. To evaluate the adsorption effect of the zeolite media, the expanded polypropylene (EPP) media which are not able to adsorb $NH_4{^+}-N$ were used as a control media in order to compare the adsorption ability. Each media was used to experiment after aerated 8 hr for attachment of the microbes. The batch experiment shows that nitrification occurred in zeolite media better than EPP media because nitrifiers could consume the relatively enough amount of $NH_4{^+}-N$ adsorbed onto the zeolite media. Compared to the reactor with EPP media, nitrification occurred only in the reactor with zeolite media under continuous operation at the empty bed contact time (EBCT) of 25 min and 3 mg/L of $NH_4{^+}-N$ concentration. As the EBCT of the reactor with zeolite media increased from 10 to 60 min, the nitrification efficiencies increased too. $NH_4{^+}-N$ removal efficiency showed up more than 90% at EBCT 60 min. And the difference in concentration of the total nitrogen between the influent and the effluent was 0.25 mg/L at EBCT 10 min, 0.78 mg/L at EBCT 25 min, 0.59 mg/L at EBCT 40 min and 0.37 mg/L at EBCT 60 min, respectively. This difference was due to between adsorption rate and nitrification rate of $NH_4{^+}-N$, and it was considered that $NH_4{^+}-N$ was adsorbed on the zeolite media by the gap of the concentration.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.628-636
• /
• 2018

Because large buoys are mainly made of steel, they are heavy and vulnerable to corrosion by sea water. This makes buoy installation and maintenance difficult. Moreover, vessel collision accidents with buoys and damage to vessels due to the material of buoys (e.g., steel) are reported every year. Recently, light buoys adopting eco-friendly and lightweight materials have come into the spotlight in order to solve the previously-mentioned problems. In Korea, a new lightweight buoy with a 7-Nautical Mile lantern adopting expanded polypropylene (EPP) and aluminum to create a buoyant body and tower structure, respectively, was developed in 2017. When these light buoys are operated in the ocean, the visibility and angle of light from the lantern installed on the light buoys changes, which may cause them to function improperly. Therefore, research on the performance of light buoys is needed since the weight distribution and motion characteristics of these new buoys differ from conventional models. In this study, stability estimation and motion analyses for newly-developed buoys under various environmental conditions considering a mooring line were carried out using ANSYS AQWA. Numerical simulations for the estimation of wind and current loads were performed using commercial CFD software, Siemens STAR-CCM+, to increase the accuracy of motion analysis. By comparing the estimated maximum significant motions of the light buoys, it was found that waves and currents were more influential in the motion of the buoys. And, the estimated motions of the buoys became larger as the sea state became worser, which might be the reason that the peak frequencies of the wave spectra got closer to those of the buoys.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2012

The effect of the packing methods for enhancing the shelf life and improving the postharvest quality of the $tah$ $tasai$ Chinese cabbage baby leaf vegetable was studied during storage. Fresh baby leaf vegetables were packed in four commercial packaging types: (1) a non-perforated bag with a 0.03-mm oriented polypropylene (OPP) film; (2) a perforated bag with 1.0-mm-diameter holes on an OPP film; (3) a 0.40-mm polyethylene terephthalate (PET) container with a hinged lid; and (4) an expanded polystyrene (EPS) tray wrapped with a 0.02-mm polyvinyl chloride (PVC) film. The quality parameters, such as the weight loss, moisture content change, color difference, and appearance of the baby leaf vegetables were investigated. The baby leaf vegetables in the PET container and in the non-perforated OPP film bag showed relatively low weight loss, high moisture content, and good external appearance compared to those in the EPS tray and in the perforated OPP film bag during limited storage periods, at $16^{\circ}C$. The PET container also protected the baby leaf vegetables from physical damage. The study results will enable the selection of a better packaging system for extending the freshness and increasing the market ability of baby leaf vegetables.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.352-352
• /
• 2017

Recently, the South Korean government encourages the cultivation of upland crops in the paddy field to maintain an adequate level of rice production and then to balance the demand and supply of rice. This is mainly because the rice consumption per capita per year has continued to decline from 135 kg in 1979 to 61.9 kg in 2016, although the rice production was relatively stable. As a result, the rice overproduction became a big social problem. As a part of that, various upland crops such as soybean, maize, minor cereals and forage crops are planted in the paddy field 10 years ago. The cultivation of these crops may settle the problem of short supply and mass import of the crops to some extent. However, a systematic remote observation of upland crops in the paddy field is very scarce. This study investigated the cultivation status of upland crops and any changes of crop harvesting in the paddy field by using an unmanned aerial vehicle (UAV). Also, we analyzed the kind of upland crops and cultivation area in the paddy field by utilizing time series observation images. A fixed wing UAV is used for the investigation. This is because it is easy to use the flight operation and to control flight management software, and it can automatically cope with various emergency states such as a strong wind and battery discharge. The material of UAV is expanded polypropylene, which has an advantage of less equipment damage and risk during takeoff and landing. We acquired observed images in Buljeong-myeon, Goesan-gun, Chungcheongbuk-do, South Korea by using fixed wing UAV in 2015 and 2016. The total investigated area reaches 6,045 ha, and among them the agricultural area was 1,377 ha. For the next step, we created an orthoimage from all images taken using Pix 4D mapper program. According to the results of image analyses in 2015, the paddy field covered total 577 ha (75.9%) with crop plant. The cultivation area of beans, ginseng, maize, tobacco and peach was 256 ha (36.6%), 63 ha (9.2%), 37 ha (5.4%), 31 ha (4.5%) and 27 ha (3.8), respectively. And in 2016, the total covered area was 586 ha (77.1%), and it was comprised of 253 ha (35.5%), 88 ha (12.3%), 29 ha (4.1%), 22 ha (3.1%) and 32 ha (4.5%) in the same order. In this study, we focused on identifying the paddy field which was converted to the cultivation of upland crops by using UAV. And, it has been indicated that the cultivation area of rice decreased from 141 ha in 2015 to 127 ha in 2016, although that of ginseng increased by 25 ha. As a result, it is expected that a lot of paddy field could be replaced by high-income crops such as ginseng and fruit tree (peach) instead of relative low-income rice. More specific and widespread research on the remote sensing in the paddy field needs to be done.

• Journal of Chest Surgery
• /
• v.34 no.9
• /
• pp.698-703
• /
• 2001

Background: Endovascular stent-graft insertion in aortic diseases is now generally accepted as an attractive alternative treatment modality. We reviewed our clinical experiences of endovascular stent-graft insertion in thoracic aorta. Material and Method: Since 1995, we performed 8 cases of endovasclar stent-graft insertion. Preoperative diagnoses were aortic aneurysms in 4, traumatic aortic ruptures in 3, and ruptured aortic pseudoaneurysm in 1. All procedures were performed in angiography room with the guidance of fluoroscopy. The stent-graft device is a custom-made 0.35mm thickness Z-shaped stainless steel wires, intertwined with each other using polypropylene suture ligation. It is covered with expanded Dacron vascular graft. Result: All procedures were performed successfully. Follow-up studies revealed 2 minimal perigraft leakages. There was no significant leakage or graft migration. 2 patients expired due to multiple organ failure and fungal sepsis. Other survivors(6) are doing well. Conclusion: Endovascular stent-graft insertion is relatively saft and effective treatment modality in the managment of various types of aortic diseases. In may be an effective alternative in aortic diseases of great surgical risk.