• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.84-93
• /
• 2001

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial temperature distribution and the radial temperature distribution in internal space of a tube. From the study, following conclusive remarks can be made. Average flow rate that flows into a tube is in proportion to square root of inlet pressure. As inlet pressure increases axial and radial temperature distribution in the inner space of vortex-tube increase. As mass flow rate ratio change, separation point moves.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.69-76
• /
• 2002

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial and the radial temperature distribution in internal spare of a tube. From the study, fellowing conclusive remarks 7an be made. First, As the number of nozzles increase, separation point move into the hot exit. Second, When we use guide vane type nozzle, the axial temperature distribution constant over the 0.75 of air mass flow rate radio. Third, When we use Spiral type nozzle, axial and radial temperature distribution in the inner space is higher than another nozzle. Fourth, Axial and radial temperature distribution in the inner space vortex-tube is determined by separation point. And separation point is moved by changing of air mass flow rate ratio. At last, A heating apparatus is possible far vortex-tube to use.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.548-552
• /
• 2005

In most physical processes, the transfer function includes a time-delay, and in the general distributed control system using a computer network, an inherent time-delay exists due to the spatial separation between controllers and actuators. Under the circumstance where an input time-delay exits, the system response overshoots and tends to diverge. For this reasons described above, a controller design method is proposed for a discrete nonlinear system including input time-delay, which adopts the time-discretization using Taylor series. Controllers are synthesized using an input/output linearization method. Finally, several cases of the computer simulations were conducted, and the results validate the proposed methods.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2016

This study analyses characteristics of space to facilitate community centering on cases of collective houses in Japan and uses the results as basic data to activate collective houses as an alternative form of housing in our country. To identify the characteristics of space for active communities with collective living space, this study conducted a theoretical examination on collective houses and housing, derived territoriality, accessibility, comfort and safety as factors of community activation and analysed various cases, and the results are presented as follows: First, territoriality is a necessary condition for formation of community, and a confined and physical space. It indicates the proper size of a space and diverse spacial areas which meet the needs of residents with the proper size and amount of space (space which can accommodate diverse generations including women, the aged and the young, flexible space which changes according to the purposes and program, space which supports leisure and hobby activities, and space which can accommodate outsiders). Second, accessibility indicates an environment which supports residents' easy use of space. As the more accessible it is, the higher the frequency of its use, spatial factors (piloti, backyards, benches and tables) should be provided, community space should be arranged in a central or decentralized way and community living space should be made for each floor. As for exits, accessibility should be considered in every way; entrances connected with community spaces, open entrances and entrances accessible from outside or individual living spaces. Third, comfort satisfies the physical and mental needs of residents through separation of floors and flows between the community and individual spaces for privacy and formation of eco-friendly spaces including vegetable gardens, gardens and plant arrangements. Fourth, safety should be considered for a higher quality environment with psychological stability and comfort, for which the following are recommended: installation of hand-rails, removal of thresholds, spacial design for the socially weak, duplex and open type structures for community space, open stages and halls, as well as indoor and outdoor openness through the use of windows.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.429-438
• /
• 2013

In this study, compare and analyze for high-rise evacuation safety design criteria improvement about internal high-rise building egress safety rule. To the result, high-rise evacuation safety design criteria improvement data can be summarized as follows. First, should compute the evacuation capacity about the number of persons and when more than 2 exits are requested, over 50% of evacuation capacity must be satisfied even approaching to 1 exit is unable. Second, 2 ways of evacuation can be made smoothly by the stair or exit separation-distance standard regulation. Third, regulate the length limitation of dead-end corridor or passageway and it should give grades in limitation of whether the spring-cooler has been installed. Fourth, must secure the evacuation way and do the evacuee guidance when it's safety area and elevator or stair. Also needs to provide extra safety area to secure horizontal direction Escape Safety except fire escaping floor.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• Korean Journal of Hospice Care
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2006

There are various understandings how to define death. In the context of medicine, death is defined as the irreversible change of the tissue according to the cessation of circulation and respiration. According to the psychologists, a person need to accept the finiteness as a human being and remain conscious that the death is not avoidable. And they say if a person doesn't regard death as unavoidable reality of life he or she will not confront the humanistic death and after all will die like animals. In philosophy, death is viewed as an unwelcome reality in the end of the journey of life. Sociologists usually understand that the society is the organization composed with living persons and human beings which construct and transmit the culture from generation to generation between the both ends of life and death. In society, the generation is changed, maintained, and developed through the phenomenon of death. Although death of human being is natural event in society, the death of a specific person brings a sense of loss, crisis, and anxiety to the communities like family, regional society, nation, and the world. In this context, death is not confined to personal dimension and it can be regarded as a social problem. It is valuable to summarize the religious perspectives on the meaning of death for the better hospice care. In shamanism, there are basic idea that although the flesh of human being disappears, soul never die. If human dies, the flesh of human being disappears but soul never disappear and come back to the origin of soul as it is called chaos. So in shamanism, it is said that shaman can solve the mortified feeling, restore the broken harmony, send the soul to comfortable space- the origin, and guarantee the blessing of descendents. Buddhists regard the death as an essential component through the cycles of life. Through this cycle, human being exits as an endlessly transmigrating being and the death is just a restoration to the original status. In Confucianism, the view on the death based on the philosophy of the "Yin and Yang" and "Five elements". In Buddhist tradition, many believers said the philosophy of "Death is the same as life". Unlike usual thoughts that a god governs "life and death" and "fortune and misfortune", Confucianists deny the governance of a god and emphasize the natural orders in which every phenomenon in the world moves according to the principle. Confucianists understand the death as a natural order with this principle. In Confucianists' belief, the essence of human being remains in their own descendent's lives after the death of ancestor, so in Confucianism there is no concept of immortality of the soul. In the history of Christianity, death has been defined generally as the separation of the immortal soul from the mortal body. In the earlier days of Old Testament, the death is regarded as a disappearance of just a flesh and human never disappear and always live in the relationship with God. Later days in Old Testament, we can find the growing concern for the life after the death because of the entrance of the theodicy. In the New Testament, the death is not regarded as the normal process of the human life and regarded as the abnormal status in which death come to human because of sin as a decisive factor and it should be conquered. In fact, the most of us afraid death because not of the fear of death itself but of the sense of the emptiness and regrets. so many people often make the monument hoping to live forever. But Christian usually regard this behavior as a sinful act because human being usually think themselves as a master of their life and attempt to become immortal in this kind of trial mortal. But if we live with God, we cannot confront such a condition because we aware limits as a mortal human being and entrust everything on Him and want to live according to His guidance. Therefore, in the Christian tradition, the death is regarded as accomplishment of life, fruits of life, invitation to the eternal life, and the last stage of human growth. For human being, the death is the great step of maturation as a human in the final stage of life.