• 한국철도학회논문집
• /
• 제10권3호
• /
• pp.343-349
• /
• 2007

The flow velocity distribution at inlet and exit of a DPF was measured using a Pitot tube and 2-D positioning equipment. An adaptor which was designed for accessing the Pitot tube probe into inlet of the DPF was fabricated with inlet flange of the DPF. The Pitot tube which was mounted in the 2-D positioning machine could access to the inlet of the DPF through the rectangular window of the adaptor. Automation of the velocity measurement at the inlet and exit of the DPF was effectively achieved and measuring time was reduced drastically. The flow velocity distribution at the inlet of the DPF showed parabola shape with maximum velocity near to the center of the DPF, as expected. The velocity distribution at the exit of the DPF showed crown shape, that is, the flow velocity distribution near to the center of the DPF is lower than that at surrounded peripheral region of the DPF.

• 동아시아경상학회지
• /
• 제9권1호
• /
• pp.53-61
• /
• 2021

Purpose - This study aims to understand the phenomenon called "regional multinational" in the geographical expansion of multinational enterprises and to find some evidence whether globalization of multinational enterprises tends to have a strong home region bias. Research design, data, and methodology - Through an in-depth case analysis, we analyze the series of strategic behaviors Wal-Mart made in South Korea from its entry in 1998 to its withdrawal in 2006. Then, we discuss the plausible causes of this exit, seeking to provide some evidence on the "regional multinational" phenomenon. Result - This study finds some evidence on the regional-based expansion of multinational enterprises. Our case study shows that Wal-Mart in South Korea focused on global standardization strategy and made an exit from the market as they were faced with increasing localization demands. From the perspective of multinational enterprises' globalization strategy, Wal-Mart's exit from the South Korean market can be considered as a strategic exit. Conclusion - The findings of this study suggest that while national responsiveness and localized adaptation are considered as a panacea for penetrating international markets, in reality most multinational enterprises attempt to add value primarily by capitalizing on similarities across markets and remain as regional multinationals.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.232-233
• /
• 2017

본 연구에서는 선미 터널을 적용한 비대칭 고속 쌍동선을 수치해석 기법을 통해 선체의 유체동역학적 성능을 평가하였다. 선미터널 형상은 터널 출구 형상에 경사각에 따라 구분하였으며, 총 3가지 형상($0^{\circ}$, $3^{\circ}$, $6^{\circ}$)을 사용하였다. 결론적으로, 저항성능의 경우, 전 속도 구간에서 $0^{\circ}$ 경사각의 선미터널은 기존 대비 4.8-17.9% 감소한 것을 확인하였다. 하지만 $3^{\circ}$와 $6^{\circ}$경사각을 가진 선미터널은 각각 기존대비 5-14%와 5-29%의 저항이 증가하는 것을 확인하였다. 이와 달리, 트림각의 경우, $0^{\circ}$경사각은 전 속도구간에서 기존선형과 유사한 경향을 보였으나, $3^{\circ}$와 $6^{\circ}$경사각의 경우 각각 FnV=1.54이후에서 평형상태 유지 및 계속적인 감소 형태를 보였다. 이와 같은 형상은 터널 출구 영역에 경사각을 증가하는 것이 저항성능 측면에서 다소 악영향을 발생하지만 운항성능 측면에서는 기존대비 개선됨을 보여준다.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.44-47
• /
• 1989

In this paper, We analyzed the End Effect of Single-sided Linear Induction Motor by combination of Finite Element Method in Active region and 0- 1 order Boundary Element Method in Entry, Exit region.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.359-364
• /
• 2005

Centrifugal pump shows the strongest secondary flow. Wake is formed near pressure surface close to hub at impeller exit for centrifugal pump impeller. Pressure gradient drives secondary flow in the inducer region, while in the remaining region the following sources drive together: > Pressure gradient > Coriolis force Low-momentum fluid near suction surface hub moves toward pressure surface hub in mixed-flow pump impeller. Tip leakage vortex dominate secondary flow in axial-flow pump impeller. Tip leakage vortex dominate secondary flow in axial-flow in axial-flow pump impeller

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.757-764
• /
• 2011

본 연구에서는 폐열회수 발전시스템에 적용가능한 100kW급 구심터빈을 대상으로 베인노즐의 출구각도 변화에 따른 구심터빈의 성능과 내부유동의 영향을 분석하였다. 이를 위해 상용코드를 이용한 3차원 CFD 해석을 수행하였다. 베인노즐 출구각이 커짐에 따라 블레이드 근처 재순환영역은 점차 작아 졌으며, 또한 단면축소효과로 인해 베인노즐 출구끝단 마하수는 1까지 관찰되었다. 본 연구를 통해 분석된 해석결과는 목표출력용 구심터빈의 최적 설계파라미터 구성을 위한 설계자료로 유용하게 활용될 것으로 기대된다.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.139-149
• /
• 1994

A numerical simulation of unsteady axisymmetric turbulent flow was performed for a reciprocating engine including port/valve assembly. The governing equations based on a nonorthogonal coordinate formulation with Cartesian velocity components were used and discretised by the finite volume method with non-staggered variable arrangements. The modified $\kappa-\xi$. turbulence model which included the effect of compressibility was used. The results of twodimensional transient calculation for the axisymmetric configuration were compared with the experimental data. Although slightly low rms velocity was predicted compared to the experimental data, predicted velocity distributions at the valve exit and in-cylinder region showed good agreements with the experimental data. The flow at the valve exit was separated at the same valve lift position with the experimental data. Two vortices incylinder region were generated during the initial intake process. The clockwise main vortex became strong and moved upward to the top wall. The counter-clockwise second vortex became weak and stick to the upper left corner of the cylinder. After middle intake process, new vortex adjacent to upper cylinder wall appeared by the piston motion and therefore, the in-cylinder flow was formed into three vortices. The cylinder pressure just before bottom dead center of piston was higher than inlet pressure and then the reverse flow occured at the valve exit. The in-cylinder flow characteristics were strongly dependent on piston motion, but insensitive to valve motion.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.693-700
• /
• 2003

The effect of the configuration of the nozzle and the impinging surface on the characteristics of the hole-tones has been experimentally investigated. It is found that the plate-tone is a special case of hole-tones, where the hole diameter is zero. The jet velocity range for hole-tones is divided into the low velocity region associated with laminar jet and the high velocity region with turbulent jet. The frequency of the tone is that for the shear layer instability at the nozzle exit or that attainable by a cascade of vortex pairing process with increase of the impinging distance. When the distance is longer than one diameter the frequency decreases to the terminal value near the preferred frequency of the column mode instability, in the range 0.23< $St_d$<0.53, where $St_d$ is the Strouhal number defined by $fd/U_J$, f the frequency, d the nozzle diameter, and $U_J$ the exit velocity. While the convection speed of the downstream vortex, in the present study, is almost constant at low-speed laminar jet, it increases with distance at high-speed turbulent jet. As the frequency increases, the convection speed decreases in the low frequency range corresponding to the preferred mode, in agreement with the existing experimental data for a free jet.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권3호
• /
• pp.296-304
• /
• 2011

In order to design a shear coaxial injector of solid particles with water, basic experiments on a particle laden jet are necessary. The purpose of the present study is to understand the effect of particle loading ratio on the particle spray characteristics (i.e. spreading angle, distribution of particle number density, velocity profiles, and particle developing region length). Hydro-reactive Al2O3 particles with a primary particle diameter of 35~50 ${\mu}m$ are used in this experiment. An automated particle feeder was designed to supply constant particle mass flowrates. Air is used as the carrier gas. To determine the air velocity at the orifice exit, tracers (aluminum oxide, 0.5~2 ${\mu}m$ primary diameter) are also supplied by a tracer feeder. A plain orifice type injector with 3 mm diameter, and 20 mm length was adopted. Particle image velocimetry is used to measure the mean and fluctuating velocity components along the axial and radial directions.