• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.199-205
• /
• 2001

Burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, burr types are classified and data bases are developed to predict burr formation result. From the CAD file for work geometry and the NC data for tool path, the exit angles are calculated at every edges. This program predicts the burr geometry at exit edges using the prediction algorithm and data bases which are developed experimentally. Simulation results on deformation strain and temperature are also available in specific 2-dimensional cutting conditions. Also algorithm which can determine the exit angle is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.717-720
• /
• 2000

Burr makes troubles on manufacturing process due to of deburring cost, quality of products and automation. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, we classified the burr type and developed data bases to predict burr formation result. This program will be used to predict burr type and geometry at a specified location. Simulation results on deformation strain and temperature are also available. Also algorithm which calculate the exit angle is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.71-78
• /
• 2003

The exit burrs in the micro-drilling of precision miniature holes are of interest, especially for ductile materials. As burrs from this process can be difficult to remove, it is important to acquire the way of predicting burr types as well as optimal cutting conditions which minimize the burrs. In this paper, an artificial neural network was used for the prediction of burr formation in micro-drilling. First, the influence of cutting conditions including cutting speed, feed and drill diameter on the exit burr characteristics, such as burr size and type, were observed and analyzed. Then. the burr types were classified by using the influential experimental data as input parameters to the neural nets.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.6-11
• /
• 1997

In most machining operations, undesirable burr are formed on the edge of the workpiece adjacent to the machined surface. Such burrs are often the cause of various problems during automatic maching process. Therefore, it is very important to know characteristics of burr formation in maching process. This paper describes characteristic of exit burrs generated during miniature drilling process. In particular, the effect of spindle speed, feedrate and drill diameter on burr formaton is investigated. The result showed that exit burr height increased significantly with increasing feedrate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.773-776
• /
• 2005

An Experiment was carried out to study deburring in frilling hole on the Inclined exit surface. Two different deburring tools, exit surface angles, materials and cutting conditions were selected to check their performance using CNC machining center. In deburring operation, there are not only flat exit surfaces but also inclined exit surfaces which is described as inclination angle. Inclination of exit surface causes a quite different burr formation when comparing with flat surface. Deburring characteristics are analyzed according to the deburring tools and cutting conditions. Several strategies for a effective deburring on inclined exit surface were proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1424-1428
• /
• 2004

A new design for deburring tools for intersecting holes is introduced. The tool tip is mounted on a slender cantilever assembled into a circular shank. The tool tip has been design to cover ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on AL6061. With the new design, mild exit burrs with exit angles greater than 45$^{\circ}$ are successfully removed. For large burrs with smaller exit angles, however, the deburring could be incomplete.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.57-65
• /
• 2003

The formation of exit burr in drilling metals is analyzed by finite element method. The simplified burr formation model is suggested for the complex mechanism of burr formation in drilling on the basis of experimental data. Using the model the magnitude of burr is predicted and the effect of material properties of workpiece and cutting condition on burr formation is analyzed in the present study. The suggested model is verified by comparing simulation results and experimental ones. The predicted size and shape of burr are in good agreement with those observed by experiment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.469-473
• /
• 2003

Milling 가공시 공구와 피삭재의 접합명에서는 절삭가공의 잔유물인 burr가 생성되고, 이러한 Burr는 작업효율과 정밀도를 감소시키며 추처리과정 (Deburring)을 야기시키는 원인이 된다. 그러므로 정밀도와 작업효율을 극대화하기 위해서는 이러한 Burr의 생성원리를 파악함과 동시에 Exit Burr의 여부에 대한 판별을 하여 최적의 가공조건을 맞추어 주어야 하는데, 이러한 경우에 지금까지는 점, 선 및 원으로 피삭재의 형상을 재현하여 공구의 경로와의 Exit 각을 통해 결과를 예측하는 연구를 해왔었다. 본 논문에서 추구하고자 하는 핵심은 이러한 피삭재의 형상을 재현하기 위해 지금까지 사용해왔던 요소를 보다 다양화시키는 방안을 제시하여 프로그램의 적용 범위를 넓히려는 것이다. 예컨대 이제까지 실제 가공에서 사용되고 있는 임의형상에 대한 표현 방식 중에서 대다수 CAD 프로그램에서 곡선 및 곡면을 표현하는 경우, B-Spline Curve의 알고리즘은 패삭재의 불규칙적인 곡면을 가장 근사하게 표현하는 최적의 해결책으로 쓰여지고 있다. 그러므로 이러한 알고리즘을 통해 프로그램의 적용예를 넓히는 것은 보다 다양한 조건에서의 Burr생성에 대한 예측을 가능케 해주는 것이다. 본 논문에서는 앞에서 언급한 바와 같이 B-Spline Curve 알고리즘을 개발하고, 프로그램에 적용하는 일련의 과정을 통해 보다 다양한 형상의 피삭재에서 단일 혹은 복합경로의 공구가 지나갈 경우에 생길 수 있는 Burr를 얼마나 효율적으로 판별할 수 있는지를 소개하고자 한다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2007

One of the most important processes is the face milling in processing task. It makes the smooth surface of processed goods. In processing stage, the formation of burr is inevitable. The formed burr decreases a detailed drawing and effects the safety of workers. So, it causes a deburring process for removing and a bottle-neck condition. Therefore, the study which can minimize the generation of burr is needed. In this paper, complex feature, such as line, arc, circle, spline is studied more reality than any other papers. And also, the algorithm which can predict the path of generated burr is established. Moreover, the finality goal is that the system which can produce tool-path minimized has to be developed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1596-1602
• /
• 2006

대부분의 금형 제작에 있어서 face milling은 가공물의 표면을 매끄럽게 하는 가장 중요한 마무리 공정이다. 이 마무리 단계에서 burr의 형성은 가히 탐탁지 않은 현상중의 하나가 된다. 또한, burr는 가공물의 정밀도를 감소시키고 작업자의 안전에 영향을 미치기 때문에 이를 제거하기 위해 후처리(deburring)과정을 야기 시키며, 불필요한 비용의 발생과 작업의 병목현상을 불러오게 된다. 따라서, burr의 생성 원리를 이해하고 burr의 발생을 최소화 할 수 있는 연구가 필요하게 된다. 이를 바탕으로 deburring의 비용을 줄일 수 있는 최적의 가공계획을 수립해야만 제품의 정밀도를 높일 수 있고, 작업 능률과 생산성을 향상시킬 수 있다. 본 논문에서는 지금까지의 연구보다 좀더 현실적으로 접근하기 위하여 피삭재의 형상이 line, arc, circle, spline 등의 여러 가지 형상으로 복합적으로 이루어진 복합형상에 대하여 burr의 발생을 연구하였고 이에 다중가공 경로까지 고려하여 burr의 형성을 예측할 수 있는 알고리즘을 수립하였다. 더 나아가 본 연구의 궁극적 목적인 burr를 최소로 발생시키는 가공경로를 설계할 수 있는 시스템을 개발하고자 한다