• The Research Journal of the Costume Culture
• /
• v.9 no.6
• /
• pp.893-907
• /
• 2001

The main purpose is to study the effects of princess lines on different body types and to disguise any imperfection by using diverse princess lines. We separated testers body shapes into specific body types, H, Y by applying both the direct and the indirect measurements. These designs were evaluated by using the point ranking system method, and then average scores were obtained from these evaluations. Following are the results of the study: 1 These are the resulting illusion effects when the shoulder width of the Princess line was fixed. When the Princess line originated from 1/3 point of the armhole, body types Y appeared to show narrow waist width. A-line silhouette appeared to display the narrowest shoulder width. When the Princess line originated from 2/3 point of the armhole, body types H and Y appeared to exhibit narrowest waist widths, and the A-line silhouette once again displayed the narrowest shoulder width. When the Princess line originated from 1/2 point of the armhole, body type H appeared to exhibit narrow width; and H-line silhouette displayed the narrowest shoulder width 2. When the Princess lines waist w'4th was fixed in order to study illusion effects of waist widths. In this experiment, locations of Princess lines and widths of the skirt were varied. When the waist width was fixed at 6.5 cm, For the H body type, the Princess line location of 1/3 point of the armhole in H-line silhouette design exhibited the narrowest waist width. For the Y body type in A-line silhouette design, the Princess line locations of 1/3 and 1/2 points of the armhole exhibited the narrowest waist width because it displayed the hourglass effect. When the waist width was fixed at 10 cm, H body type did not exhibit any significant differences between designs. For Y body type, A-line silhouette design with the Princess line origination point at 1/3 down the armhole exhibited the narrowest waist width. 3. The illusion effects of the hip were studied by fixating the width of the skirt and varying the locations of Princess line and waist widths. In H-line skirt silhouette designs, all two body types exhibited narrow hips when the Princess line origination points were at 1/3 and 1/2 way down the armhole. For A-line skirt silhouette, H body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/2 point in the shoulder was shown. Y body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/3 point of the armhole and 2/3 point of the shoulder. 4. With both waist and skirt widths fixed, all two body types exhibited taller and slender postures when the Princess line originated from the shoulder compare to the armhole.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.793-800
• /
• 2005

We isolated and identified microorganisms from the aerial environment of domestic museums. The fungi, Penicillium spp., Alternaria spp., and Cladosporium spp. were isolated in many museums. It seems that these fungi are related to biological degradation of textile remains. A total of 14 kinds of bacterial strains were isolated: Acinetobacter spp., Pseudomonas spp., Neisseria spp., Alcaligenes spp., Shigella spp., Klebsiella spp., Corynebacterium spp., Aerococcus spp., Bacillus spp., Micrococcus spp., Citrobacter spp., Erwinia spp., Salmonella spp., and Providencia spp. Acinetobacter spp., Pseudomonas spp., Neisseria spp., and Alcaligenes spp. were the predominate bacteria found in samples with a variety of bacteria. This suggests that there is a relationship between bacteria and the damage of textile remains. In the museum, we isolated Alternaria spp, Geotrichum spp., Penicillium spp. Acinetobacter spp., Pseudomonas spp., Alcaligenes spp. from the entrance, exhibit hall and storage, but they were found in smaller number and species in the exhibit cases and paulownia cases. We concluded that paulownia cases were not influenced by the microorganisms because of quality of care provided by the museum staff. Corynebacterium spp., and Bacillus spp. were not detected at the entrance and exhibit hall but were detected in paulownia cases. It is presumed that those bacteria did not flow in from outside, but resulted from contaminants in paulownia cases. In the distribution of microorganisms associated with textile remains, more fungi were detected than bacteria. Acinetobacter spp., Pseudomonas spp., and Neisseria spp., were isolated from silk items. Penicillium spp. and Cladosporium spp. were isolated in the silk and hump items. Aspergillus spp. and Penicillium spp. were isolated from the cotton items. On the other hands, there were no fungi strains in the wool items. Most of the isolated strains from textile remains were aerial microorganisms from the museum environment. These results suggest that textile remains were apt to contaminated by contact with the air.

• Clean Technology
• /
• v.22 no.2
• /
• pp.75-81
• /
• 2016

As the quality of life has improved, the desire for the safety and quality of the foods and drugs has been gradually increasing. For safety and quality management in foods, drugs, health management, agriculture, environmental conservation, and the industrial fields, the demand for quickly and accurately measuring various chemicals has been increasing. As well, the desire for self-diagnosis of one's own health state and self-examining the safety of environment has been gradually increasing. Optical Isomers can have very different physiological effects on human beings. One isomer can exhibit desirable pharmacological, pharmacodynamic, pharmacokinetic and physiological properties, while the other isomer can exhibit undesirable and toxic properties toward living organisms, especially human beings. And they can exhibit different activities in chemical and biotechnological processes. Although the majority of commercially available drugs are now both synthetic and chiral materials, a most chiral drugs are still marketed as racemic drugs. Thus, to avoid possible undesirable side effects from chiral drugs, more effective methods for separating and recognizing chiral compounds are urgently needed. In this report, we investigated the overall developing trends of the chiral drug separation and analysis technology by using molecular recognition.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.325-343
• /
• 2023

Direct methanol fuel cells (DMFCs) have been attracting attention as energy conversion devices that can directly supply methanol liquid fuel without a fuel reforming process. The commercial polymer electrolyte membranes (PEMs) currently applied to DMFC are perfluorosulfonic acid ionomer-based PEMs, which exhibit high proton conductivity and physicochemical stability during the operation. However, problems such as high methanol permeability and environmental pollutants generated during decomposition require the development of PEMs for DMFCs using novel ionomers. Recently, studies have been reported to develop PEMs using hydrocarbon-based ionomers that exhibit low fuel permeability and high physicochemical stability. This review introduces the following studies on hydrocarbon-based PEMs for DMFC applications: 1) synthesis of grafting copolymers that exhibit distinct hydrophilic/hydrophobic phase-separated structure to improve both proton conductivity and methanol selectivity, 2) introduction of cross-linked structure during PEM fabrication to reduce the methanol permeability and improve dimensional stability, and 3) incorporation of organic/inorganic composites or reinforcing substrates to develop reinforced composite membranes showing improved PEM performances and durability.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.524-526
• /
• 2002

Hypericin was found to exhibit the highest antitumoral activity in treating EAT by photodynamic therapy (PDT): Hypericin>HPde>PII>TPPS$_4$>ALA. Moreover, 25% of mice after Hyp-based PDT survived 4 months, if compare with control group. Antitumor activity of these photosensitizers was in rather clear correlation with accumulation potential.

• Journal of the Korean Statistical Society
• /
• v.22 no.2
• /
• pp.235-247
• /
• 1993

The predictive density function of a potential future observation and its first four moments are obtained in this paper to study the effects of a non-normal prior of the unknown mean of a normal population. The derived predictive density function is modified to study changes in utility curves, used to choose the optimum treatment from a given set of treatments, at a given level of stimulus due to slight deviations from normality of the prior distribution. Numerical illustrations are provided to exhibit some effectsl.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.203-208
• /
• 1999

Friction and wear test have been performed on nylon, polyacetal, and PTFE(polytetrafluoroethylene), in reciprocating dry sliding conditions against a steel disc. According to the results, polyacetal show lowest wear rates and PTFE was found to exhibit lowest friction coefficient. The prominent wear mechanism found were adhesion and abrasion.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.274-277
• /
• 2000

Thin Film Transistor(TFTs) were fabricated from poly-Si crystallized by a two-step annealing process on glass substrates. The combination of low-temperature(500$^{\circ}C$) Metal-Induced Lateral Crystallization(MILC) furnace annealing and high -temperature (700$^{\circ}C$) rapid thermal annealing leads to the improvement of the material quality The TFTs measured with this two-step annealing material exhibit better characteristics than those obtained by using conventional MILC furnace annealing.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.227-230
• /
• 1990

In this paper we present a variable structure systeme-model following adaptive control (VSS-MFAC) method for an uncertain turbo-generator system which is apt to suffer from the unmodeled parameter uncertainties and the external disturbances. The simulation results for the power system stabilizer(PSS) exhibit robust adaptive model-following properties well in the PSS designed by the proposed VSS-MFAC methodology when a step change in the mechanical torque and a parameter variation is applied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1718-1723
• /
• 1991

The determination of a production sequence is an important problem in a batch process operation. In this paper a new algorithm for a near optimal production sequence of N product in an M unit serial multiproduct batch process is proposed. The basic principle is the same as that of Johnson's algorithm for two-unit UIS system. Test results on a number of selected examples exhibit the superiority over previously reported results. In addition, a tabulation technique is presented to calculate the makespan of a given sequence of production for all processing units under UIS mode.