• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3068-3073
• /
• 2007

Aerodynamic forces and moments have been used to control rocket propelled vehicles. If control is required at very low speed, Those systems only provide a limited capability because aerodynamic control force is proportional to the air density and low dynamic pressure. But thrust vector control(TVC) can overcome the disadvantages. TVC is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. In this paper, the conceptual design and the performance study on the tapered ramp tabs of the thurst vector control has been carried out using the supersonic cold flow system and shadow graph. Numerical simulation was also performed to study flow characteristics and interactions between ramp tabs. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.32-37
• /
• 2007

Aerodynamic forces and moments have been used to control rocket propelled vehicles. If control is required at very low speed, Those systems only provide a limited capability because aerodynamic control force is proportional to the air density and low dynamic pressure. But thrust vector control(TVC) can overcome the disadvantages. TVC is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. In this paper, the conceptual design and the study on the tapered ramp tabs of the thurst vector control has been carried out using the supersonic cold flow system and schlieren system. This paper provides the thrust spoilage, three directional forces and moments and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.397-402
• /
• 2016

원자력 발전소와 화력 발전소에서는 양질의 전기를 생산하기 위해서는 발전기에 연결된 고압 및 저압 증기터빈에 최적량의 증기를 공급하여야 한다. 터빈에 증기를 공급하거나 차단하는 특수한 밸브인 터빈출력제어장치를 사용하고 있으며, 이 터빈출력제어장치는 유압서보 액추에이터로 구동 된다. 발전소에서는 유압시스템에서 생성되는 기체로 인하여 유압서보 액추에이터의 성능이 저하되거나, 생성된 기체가 압축되면서 발생하는 열로서 씰을 태우고 마모를 증가시켜서 빈번한 고장이 유발된다. 일부 발전소에서는 고정형 오리피스를 사용하여 공기를 배출하고 있지만 많은 유량배출에 따른 동력 손실과 빈번하게 작동되는 펌프, 전기모터 및 밸브 등의 고장을 발생시킨다. 본 연구에서는 기존의 고정형 오리피스와 같이 초기에 많은 량의 공기를 배출하고 정상운전에서는 매우 미세한 유량만 통과 시킬 수 있는 부하 감응형 공기 배출밸브를 모델링하고 해석하여 장착함으로서 유압서보 액추에이터의 제어 정밀성 확보와 기체 압축으로 인한 고장을 방지할 수 있게 하였다.

• 한국연소학회지
• /
• 제14권4호
• /
• pp.17-24
• /
• 2009

Reburning is one of the most useful technologies for reducing nitric oxide in economically and technically. The reburning process was demonstrated as an effective NOx reduction method through injection of a secondary hydrocarbon fuel. An experimental study has been conducted to evaluate the effect of biomass reburning on NOx and CO formation in a light oil flamed combustion furnace. Reburning tests on NOx reduction of air-carried rice husk powder as the reburn fuel and light oil as the main fuel were performed in flames stabilized by a co-flow swirl and fuel staged burner, which was mounted at the front of the furnace. The results included flue gas emissions and temperature distribution in the furnace for several kinds of experimental conditions. It was observed clearly that NOx concentrations in the exhaust have considerably decreased due to effect of biomass reburning. The maximum NOx reduction rate was 42% when the reburn fuel fraction was 0.18. The CO emissions were kept under 42 ppmv in all experimental tests. And this paper makes clear that in order to decrease NOx concentration in the exhaust when the biomass reburning system is adapted, the control of some factors such as reburn fuel fraction and reburn zone fraction is very important.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1068-1076
• /
• 1997

Emission control of acid exhaust gases from coal-fired power plants and waste incinerators has become an increasing concern of both industries and regulators. Among those gaseous emissions, SO$_{2}$ has been eliminated by a Spray Drying Absorber (SDA) system, where the exhaust gas is mixed with atomized limestone-water slurry droplets and then the chemical reaction of SO$_{2}$ with alkaline components of the liquid feed forms sulfates. Liquid atomization is necessary because it maximizes the reaction efficiency by increasing the total surface area of the alkaline components. An experimental study was performed with a laboratory scale SDA to investigate whether the scrubbing efficiency for SO$_{2}$ reduction increased or not with the application of a DC electric field to the limestone-water slurry. For a selected experimental condition SO$_{2}$ concentrations exited from the reactor were measured with various applied voltages and liquid flow rates. The applied voltage varied from -10 to 10 kV by 1 kV, and the volume flow rate of slurry was set to 15, 25, 35 ml/min which were within the range of emission mode. Consequently, the SO$_{2}$ scrubbing efficiency increased with increasing the applied voltage but was independent of the polarity of the applied voltage. For the electrical and flow conditions considered a theoretical study of estimating average size and charge of the atomized droplets was carried out based on the measured current-voltage characteristics. The droplet charge to mass ratio increased and the droplet diameter decreased as the strength of the applied voltage increased.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.165-176
• /
• 1996

The flow field and spray characteristics for loop scavenged type 2stroke engine having pancake shape was numerically computed using KIVA-Ⅱ code. The cylinder has 1intake port, 2side intake ports and 1exhaust port with induced flow angle 25 deg. In engine calculation, the chop techniques is used to strip or add planes of cells across the mesh adjacent to the TDC and the BDC(ports parts) for preventing the demand of exceed time during the computation, providing a control on cell height in the squish region. The modified turbulent model including the consideration of the compressibility effect due to the compression and expansion of piston was also used. The case of 25 deg.(injection angle) which is opposite to scavenging flow direction shows better the distribution of droplets and the evaporation rate of droplets compared to other cases(0 deg., - 25 deg.). When injection pressure was increased, the spray tip penetration became longer. When injection pressure was increased, the interaction between the upward gas velocity and spray droplets strongly cause. Thus the breakup of droplets is strongly occurred and the evaporation rate of droplets was found to be better.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1350-1352
• /
• 2003

For developing a 100 kW MCFC power generation system, Several design parameters for a fuel cell stack and system analysis results by Cycle Tempo, a processing computer soft ware, were described. Approximately two substacks with 90 cells are required to generate 100 kW at a current density of $125\;mA/cm^2$ with $6000\;cm^2$ of cells. An overall heat balance was calculated to predict exit temperature. The 100 kW power is expected only under pressurized operation condition at 3 atm. Recycle of cathode gas by more than 50% is recommended to run the stack at $125\;mA/cm^2$ and 3 atm. Manifolds should be designed based on gas flow rates for the suggested operating condition. The fuel cell power generation system was designed conceptually with several choices of utilization of anode exhaust gas. To operate and evaluate the MCFC system, control and measurement system and operation mode are designed before 100 MCFC system construction. In system control schematics, OS, PLC and MMI were consisted and have roles for MCFC system control. For operation of 100 kW MCFC system, NS, PS PR mode were considerated step by step and simulated.

• 청정기술
• /
• 제25권1호
• /
• pp.19-32
• /
• 2019

여러 국가를 통행하는 다양한 형태의 선박에서 배출되는 황산화물에 의해 지역적인 대기오염이 심화됨에 따라 국제해사기구에서는 황산화물 배출제어지역을 설정하여 규제하고 있다. 이러한 지역적 규제를 만족시키기 위해서는 선박의 연료선택방법과 배가스 후처리 장치가 적용되고 있으나 경제적인 이유로 스크러버를 설치하여 배출되는 황산화물의 양을 저감하는 배가스 후처리 방법이 주로 선호되고 있다. 스크러버는 배출가스 중 황산화물을 액적에 흡수시켜 황산화물의 양을 저감하는 장치로 액적의 크기에 따라 스크러버의 성능이 좌우된다. 이러한 성능을 평가하기 위해서, 본 논문에서는 대향류형 스크러버와 사이클론 스크러버를 설계하고, 전산유체역학을 이용하여 각 액적의 크기에 따른 탈황 효율과 액적이 증발되는 양을 평가하였다. 평가 방법으로 스크러버 내부는 기체와 액체의 2상 유동을 가지기 때문에, Eulerian-Eulerian 해석 기법을 사용하였으며, 액적의 직경이 $100{\mu}m$, $300{\mu}m$, $500{\mu}m$와 $700{\mu}m$일 때 계산을 진행하여 스크러버를 분석하였다. 계산 결과, 2종류의 스크러버 모두 $500{\mu}m$와 $700{\mu}m$일 때 높은 탈황 효율과 낮은 증발량을 나타내었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.569-572
• /
• 2010

초음속 추력편향 노즐의 시험 평가를 위한 시험 장치를 설계 하였다. 본 시험 장치는 축소된 모델추력편향장치를 이용하여 초음속 추력 편향시의 축추력, 모멘트, 배기가스 속도 및 압력 등을 측정하여 다양한 기하학적 변수에 대한 노즐의 성능특성을 이해하고자 한다. 본 시험장치는 고압 공기저장장치, 유량조절 및 측정장치, 시험노즐과 계측시스템으로 구성되어 있다.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1065-1070
• /
• 2009

Experimental design for ecological restoration approach was investigated from the P' company's slag dumping area with higher pH value. The degree of pH recovery was measured by the injection of carbon dioxide from the LNG exhaust gas, and the residual carbon, for example, calcium and carbonate which can be controlled by artificial seaweed beds. The degree of adaptability from 3 algaes (Undaria pinnatifida, Sargassum horneri and Ecklonia stolonifera) and uptake nutrient function of Ecklonia stolonifera chosen in the first treatment were measured in the laboratory to determine the transplanting algae in artificial seaweed beds. The higher value of pH was decreased to 7.0~8.5 by injection of LNG exhaust gas with flow rate $20\;m^3/min$. In the experiment design at laboratory, the upper part of frond of Undaria pinnatifida and Sargassum horneri began to decay, and the color changed after 10 days. However, those of Ecklonia stolonifera were after 14~20 days. The uptake rate of nutrient from Ecklonia stolonifera was higher than those of other algaes, and those was similar pattern in the control (e.g. seawater); The DIN concentration uptake of Ecklonia stolonifera was $1.88\;{\mu}g/L/hr$ avg. in leachate, but $2.19\;{\mu}g/L/hr$ avg. in seawater. However, the ${PO_4}^3$-P concentration uptake was $0.18\;{\mu}g/L/hr$ avg. in leachate, but $0.31\;{\mu}g/L/hr$ avg. in seawater. These result indicated Ecklonia stolonifera uptaked these nutrients in the leachate as well as in seawater, and it may suggested for this species to transplant for constructing artificial seaweed beds.