• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.276-276
• /
• 2012

The interface morphology of organic active layers is known to play a crucial role in the performance of organic photovoltaic (OPV) cells. Especially, a controlled nanostructure with a large contact area between electron donor (D) and acceptor (A) layers is necessary to improve the power conversion efficiency (PCE) of the cells since the short exciton diffusion lengths in organic semiconductors limit the charge (hole and electron) separation before excitons recombination. In this work, we developed simple solvent treating methods to fabricate a nanostructured DA interface and applied them to enhance the PCE of ZnPc/C60 based small molecule OPV cells. Interestingly, it was observed that the solvent treatment on the donor layer prior to the deposition of the acceptor layer resulted in a significant decrease in PCE, which was due to an existence of undesirable voids at the DA interface. Instead, the solvent vapor treatment after the DA bilayer formation led to densely packed and well dispersed DA contacts. Consequently, 3-fold enhancement of PCE as compared to the untreated bilayer cell was accomplished.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.252-252
• /
• 2012

It is widely accepted that short exciton diffusion lengths of organic semiconductors with respect to the film thickness limit the charge (hole and electron) separation before excitons recombination in organic photovoltaic (OPV) cells. Therefore the efficient absorption of incident light within the thin active organic layer is of great importance to improve the power conversion efficiency (PCE) of the cells. In this work, we fabricated 2-dimensionally (2D) nano-patterned poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOST:PSS) layers using capillary phenomenon and nano-imprinting technology at the scale of several hundred nanometers. This 2D nano-patterned PEDOT:PSS layer exerted photonic crystal effect such as redirection of light paths and variation of light intensity at specified wavelengths. It is also expected that the consequently alternated light pass lengths and intensities change the absorption properties of zinc phthalocyanine (ZnPc) thin films grown on top of the nano-patterned PEDOT:PSS layer. The influence of conductivity and thickness of the PEDOT:PSS layer on the absorption properties of ZnPc thin films were also investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.96-96
• /
• 2011

ZnO는 실온에서 3.37 eV의 큰 밴드갭 에너지와 60 meV의 높은 exciton binding energy를 가지고 있어 광소자를 만드는데 큰 관심을 얻고 있다. 또한 최근에는 ZnO를 기반으로 한 동종접합 전광소자를 만드는데 성공하였다. 그러나 소자의 성능을 높이기 위해 여러 가지 개선할 사항이 있다. 그 중에 하나는 캐리어를 잘 주입 시키기 위한 금속-반도체 접합을 구현하는 것이다. 이러한 문제를 개선하기 위해서는 ZnO 기반으로 한 낮은 비저항을 가진 소자가 필요하다. 일반적으로 n-type ZnO Ohmic 접합에서 쓰이는 금속은 Ti/Au, Ta/Au, Al/Au 등이 있다. 실험방법은 c-plane 사파이어 기판 위에 펄스 레이저 증착 방법으로 3시간 동안 $500^{\circ}C$ 환경에서 ZnO 박막을 성장하고, 표면을 고르게 하기 위해 $1000^{\circ}C$에서 1분 동안 열처리를 진행하였다. 샘플 위에 photo-resist 코팅을 한 다음 transfer length method(TLM)를 이용하기 위해 포토리소그래피 장비를 통하여 샘플을 노광하였다. 그 위에 Ti/Au (30 nm/80 nm)를 E-beam/thermal evaporation으로 증착 하였다. 이는 일반적인 반도체 공정과 Lift-off방식을 이용하여 패터닝 하였다. 샘플을 열처리하는 것은 금속과 반도체의 접촉 접착과 전기적인 성질을 개선하고 응력과 계면 결함을 감소시키기 때문에 샘플을 100, 200, 300, 400, $500^{\circ}C$에서 각각 열처리하였다. 저항을 구하기 위해 각각 열처리된 샘플과 as-deposited의 전류, 전압 특성을 측정하고, 이러한 실험 방법으로 n-type ZnO의 Ohmic 접합을 구현하는 것이 목표이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.384-384
• /
• 2011

양자점 감응형 태양전지는 염료감응형 태양전지와 비슷한 구조를 가지지만, 유기물 염료를 대신하여 무기물 양자점을 사용함으로서 기존 유기물 염료가 가지는 한계점을 극복할 수 있다. 양자점을 광감응 염료로 사용하는 경우 양자제한효과(quantum confinement effect)에 의해 양자점의 사이즈조절만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 유기물 염료보다 광흡수 능력도 뛰어나다. 더불어, 하나의 광자를 흡수하여 두개 이상의 전자-정공쌍을 만들 수 있는(multiple exciton generation) 가능성이 있어 기존 태양전지가 가지는 이론적 한계효율(Shockley-Queisser limit)을 뛰어넘을 수 있다. 본 연구에서는 고효율의 양자점 감응형 태양전지 개발을 위해, ZnO 나노선 구조에 CdS, CdSe 양자점을 증착한 CdSe/CdS/ZnO 나노선 헤테로구조를 수열합성법으로 합성하였다. 증착한 CdSe/CdS 양자점이 태양광의 가시광 전 영역을 흡수하여 전자-정공을 생성하며, 세 물질 간의 밴드구조를 통해 양자점에서 생성된 전자가 ZnO 나노선으로 포집되고, 바닥전극으로 직접연결이 되어있는 1차원의 나노선 구조를 통해 전자를 효율적으로 운반할 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.369-369
• /
• 2011

양자점 감응형 태양전지는 가시광 영역을 흡수, 이용할 수 있는 광감응 물질로 무기물 양자점을 사용하며, 이 경우 나노미터 크기의 무기물 양자점으로 인한 양자제한 효과 (quantum confinement effect)에 의해 양자점의 사이즈 조절 만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 하나의 광자를 흡수하여 두개 이상의 전자-정공쌍을 만들 수 있는 (multiple exciton generation) 가능성이 있어 기존 태양전지가 가지는 이론적 한계효율(Shockley-Queisser limit)을 뛰어넘을 수 있다. 본 연구에서는 양자점 및 염료 감응형 태양전지분야에서 가장 많이 사용되고 있는 TiO2 다공성 필름이 아닌, ZnO 나노선 구조를 이용하여 양자점 감응형 태양전지를 제작하였다. ZnO의 경우 TiO2보다 높은 전자이동도를 가지며, 나노선 구조가 바닥전극까지 수직 연결된 1차원의 전자전달경로를 제공하여 결과적으로 광전자 포집에 유리하다. 또한, CdS, CdSe 양자점을 동시에 사용하여 광흡수 범위를 가시광 전 영역으로 확장하였으며, 계단형 밴드구조를 통해 광전자-정공 분리 및 포집을 용이하게 하였다. 더 나아가 전해질의 조성, 나노선의 길이 등 다양한 부분을 조절하면서 각 변수가 소자의 효율에 미치는 영향을 관찰하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.131-133
• /
• 2012

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons (D0X), two-electron satellite (TES), free-to-neutral-acceptors (e,A0), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for D0X in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for D0X transitions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.209-210
• /
• 2000

The energy transfer from photoexcited polyvinylcarbazole (PVK) chromophores with a bandgap of 3.7 eV as a donor to fluorophores of poly(dihexylfluorenevinylene) (PDHFV) or poly(dihexylfluorenedihexoxyphenylenevinylene) (PDHFHPV) as an acceptor in bilayered specimens should be carried out since the spectral overlap pairs fulfills the requirement for the $F{\"{o}}rster-type$ condition. However, the energy transfer rate from the chromophores with a wider bandgap to the fluorophores with a narrower bandgap is proved to be strongly dependent on the lifetime ratio between the excitons.

• Ceramist
• /
• v.22 no.4
• /
• pp.350-356
• /
• 2019

Recently, transition metal dichalcogenide (TMDC) monolayers have been the subject of research exploring the physical phenomenon generated by low dimensionality and high symmetry. One of the keys to understanding new physical observations is the electronic band structure of 2D TMDCs. Angle-resolved photoelectron spectroscopy (ARPES) is, to this point, the best technique for obtaining information on the electronic structure of 2D TMDCs. However, through ARPES research, obtaining the long-range well-ordered single crystal samples always proves a challenging and obstacle presenting issue, which has been limiting towards measuring the electronic band structures of samples. This is particularly true in general 2D TMDCs cases. Here, we introduce the approach, with a mathematical framework, to overcome such ARPES limitations by employing the high level of symmetry of 2D TMDCs. Their high symmetry enables measurement of the clear and sharp electronic band dispersion, which is dominated by the band dispersion of single-crystal TMDCs along the two high symmetry directions Γ-K and Γ-M. In addition, we present two important studies and observations for the direct measuring of the exciton binding energy and charge transfer of 2D TMDCs, both being established by the above novel approach.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.124-127
• /
• 2005

It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerene$(C_60)$ as electron acceptor(A) with doped charge transport layers, and BCP and $Alq_3$ as an exciton blocking layer(EBL). We have measured the photovoltaic characteristics of the solar cell devices using the Xe lamp as a light source. We were use of $Alq_3$ layer leads to external power conversion efficiency was $2.65\%$ at illumination intensity $100\;mW/cm^2$. Also we confirmed the optimum thickness ratio of the DA hetero-junction is about 1:2.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2345-2350
• /
• 2009

As part of an effort to discover bioactive natural products from marine sources, we investigated the bioactive secondary metabolites from two marine isolates of the fungi, Trichoderma viride and Rhizopus stolonifer. Three cyclopentenones, myrothenones A (1) and B (2) and trichodenone A (3), were isolated from T. viride and two cyclopentenones, 2-bromomyrothenone B (4) and botrytinone (5), were isolated from R. stolonifer. The molecular structures and absolute stereochemistries of the cyclopentenones were determined from chemical and physicochemical evidence, including quantum chemistry calculations, X-ray analysis, and the circular dichroism (CD) exciton chirality method. Myrothenone A (1) displays tyrosinase inhibitory activity, with an I$C_{50}$ value of 6.6 ${\mu}M$, and is therefore more active than the positive control, kojic acid.