• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1018-1025
• /
• 2003

The diesel engine is often a serious excitation source in ships. Both the varying cylinder gas forces and the reciprocating and rotating mass forces associated with the crank and the connecting rod mechanism produce ample possibilities for excitation of the engine structure itself, the shafting, the surrounding substructures as well as the hull girder. This paper presents a guide for optimization of excitation forces produced by the marine propulsion 2-stroke diesel engine. The computational program for predicting the excitation forces is developed and applied to 2-stroke in-line engines. The object function is defined as the work done by every cylinder excitation force which is related to the mode shape of the diesel engine system, especially in the torsional vibration of the shafting. As a practical application of the presented method, the crank angle of 7 cylinder 2-stroke engine is optimized to reduce torsional vibration stresses on the shafting. Compared with the regular firing angle, about 60% of the 4th order torsional vibratory stress on the propeller shaft can be reduced by optimizing the crank angle irregularly. The usefulness of the presented optimization method is confirmed by the measurements.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.709-717
• /
• 2004

The diesel engine is often a serious excitation source in ships. Both the varying cylinder gas forces and the reciprocating and rotating mass forces associated with the crank and the connecting rod mechanism produce ample possibilities for excitation of the engine structure itself, the shafting, the surrounding substructures as well as the hull girder. This paper presents a guide for optimization of excitation forces produced by the marine propulsion 2-stroke diesel engine. The computational program for predicting the excitation forces is developed and applied to 2-stroke in-line engines. The object function is defined as the work done by every cylinder excitation force which is related to the mode shape of the diesel engine system, especially in the torsional vibration of the shafting. As a practical application of the presented method. the crank angle of 7 cylinder 2-stroke engine is optimized to reduce torsional vibration stresses on the shafting. Compared with the regular firing angle, about 60 ％ of the 4th order torsional vibratory stress on the propeller shaft can be reduced by optimizing the crank angle irregularly. The usefulness of the presented optimization method is confirmed by the measurements.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.137-150
• /
• 2004

The optimization of active bars' placement and feedback gains of closed loop control system for random intelligent truss structures under non-stationary random excitation is presented. Firstly, the optimal mathematical model with the reliability constraints on the mean square value of structural dynamic displacement and stress response are built based on the maximization of dissipation energy due to control action. In which not only the randomness of the physics parameters of structural materials, geometric dimensions and structural damping are considered simultaneously, but also the applied force are considered as non-stationary random excitation. Then, the numerical characteristics of the stationary random responses of random intelligent structure are developed. Finally, the rationality and validity of the presented model are demonstrated by an engineering example and some useful conclusions are obtained.

• 한국음향학회지
• /
• 제23권5호
• /
• pp.420-427
• /
• 2004

본 논문에서는 선형예측 잔여신호에 대한 하모닉 벡터 여기 코딩과 시간 대역 분리 혼합 코딩을 결합한 4kbps EHSX (Enhanced Harmonic Stochastic Excitation) 음성부호화기 실시간 구현한 내용을 기술한다. 유성음 구간에서는 하모닉 여기 코딩에 무성음 구간에 대해서는 분석-합성 구조의 벡터 여기 코딩을 사용하였으며, 유/무성음이 혼재하는 전이구간에서는 시간 분리 전이 코딩을 사용하였다. 이 음성부호화기 구현을 위해 부동소수점과 고정소수점을 모두 지원하는 DSP인 TMS320C6701을 사용하였고, 연산량을 줄이기 위해 IFFT를 사용한 저 복잡도 정현파 합성법을 사용하여 알고리즘의 최적화를 이루었으며, 복잡도의 문제가 되는 부분을 고정소수점으로 변환한 후 파이프라인을 적용한 핸드 어셈블리 코딩을 하여 구현에서의 최적화를 이루었다. 또한, 메모리의 효율성을 극대화하기 위해 캐쉬 메모리 할당과 데이터를 내부 메모리에 할당하였고 수학 연산의 최적화를 위해 FastRTS67x 라이브러리를 사용하였다. 개발 환경은 DSP EVM 보드를 사용하였으며 음성 신호의 입·출력 확인으로 동작 및 기능을 검증하여 실시간 구현하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.128-132
• /
• 1997

This paper deals with the optimization of pipe-support allocation using the genetic algorithm, and shows the feasibility of the optimization method to actual design problems and also the convergence characteristics of optimization calculation with respect to the various seismic waves. The piping system was modeled as mass-spring system with 5 degrees of freedom and the support was as spring-damper. The support allocation problem was formulated to minimize the response of the piping system to seismic excitation.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.58-63
• /
• 2012

The Test Signal Method is adopted to analyze the impact of thyristor controlled series capacitor (TCSC) on sub-synchronous oscillation. The results show that the simulation system takes the risk of Sub-synchronous Oscillation (SSO) while the TCSC is operating in the capacitive region. A supplementary excitation damping controller (SEDC) is used to mitigate SSO caused by the TCSC. A new optimization method which is aimed for optimal phase compensation is proposed. This method is realized by using the particle swarm optimization (PSO) algorithm. The simulation results show that the SEDC designed by this method has superior suitability, and that the secure operation scope of the TCSC is greatly increased.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1455-1468
• /
• 2016

This paper presents a grid-connected dual stator-winding induction generator (DWIG) wind power system suitable for wide wind speed ranges. The parallel connection via a unidirectional diode between dc buses of both stator-winding sides is employed in this DWIG system, which can output a high dc voltage over wide wind speed ranges. Grid-connected inverters (GCIs) do not require booster converters; hence, the efficiency of wind energy utilization increases, and the hardware topology and control strategy of GCIs are simplified. In view of the particularities of the parallel topology and the adopted generator control strategy, we propose a novel excitation-capacitor optimization solution to reduce the volume and weight of the static excitation controller. When this excitation-capacitor optimization is carried out, the maximum power tracking problem is also considered. All the problems are resolved with the combined control of the DWIG and GCI. Experimental results on the platform of a 37 kW/600 V prototype show that the proposed DWIG wind power system can output a constant dc voltage over wide rotor speed ranges for grid-connected operations and that the proposed excitation optimization scheme is effective.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.108-114
• /
• 2000

The excitation forces from the periodical firing pressure in cylinder and the rotating crank mechanism cause lots of vibration problems in diesel engine. In this paper, the theoretical formulas for excitation forces are introduced and computational program for the optimization of crank angle is also developed to reduce the free moments in diesel engine. The computational results of 4-stroke in-line engine are applied to verify the reliability of the program.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.768-777
• /
• 2005

This paper shows that the performance of a nonlinear fluid engine mount can be improved by an optimal design process. The property of a hydraulic mount with inertia track and decoupler differs according to the disturbance frequency range. Since the excitation amplitude is large at low excitation frequency range and is small at high excitation frequency range, mathematical model of the mount can be divided into two linear models. One is a low frequency model and the other is a high frequency model. The combination of the two models is very useful in the analysis of the mount and is used for the first time in the optimization of an engine mount in this paper. Normally, the design of a fluid mount is based on a trial and error approach in industry because there are many design parameters. In this study, a nonlinear mount was optimized to minimize the transmissibilities of the mount at the notch and the resonance frequencies for low and high-frequency models by a popular optimization technique of sequential quadratic programming (SQP) supported by $MATLAB^{(R)}$subroutine. The results show that the performance of the mount can be greatly improved for the low and high frequencies ranges by the optimization method.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.3-6
• /
• 1997

This paper reports on the optimal design of the excitation codebook in the 13 kbps variable rate QCELP coder of Korean speech. We present two optimal excitation codebooks which consist of 128 and 556 samples, respectively. For the design and test of the improved codebook, a data base of Korean speech is used. A quasi-Newton optimization algorithm was developed to design the codebook. The optimized codebook which remains sparse, can produce an average gain of 0.84 and 0.45 dB in SNR and SEGSNR respectively. Informal listening tests confirm the improvement in speech quality.