• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 춘계학술발표대회 논문집
• /
• pp.60-65
• /
• 2006

Previous studies demonstrated that laser ablation under transparent liquid can result in ablation enhacement and particle removal from the surface. In this work, the liquid-assisted excimer laser ablation process is examined fer polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), Si, and alumina with emphasis on ablation enhacement, surface topography, and debris formation. In the case of PET and PMMA, the effect of liquid is analyzed both fer thin water film and bulk water. As the ablation enhanement by liquid is already known for Si and alumina, the analysis focuses on surface topography and debris formation resulting from the liquid-assisted laser ablation process. The results show that application of liquid increases the ablation rate of PMMA while that of PET remains unchanged even in the liquid-assisted process. It is also revealed that the liquid can significantly improve the surface quality by reducing the debris deposition. However, the surface roughness is generally deteriorated in the liquid-assisted process. The surface toporaphy is found to be strongly dependent on the method of liquid application, i.e., thin film or bulk liquid.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.251-253
• /
• 1996

High temperature superconducting (HTS) target has been irradiated by excimer laser beam. The surface of HTS target has been changed and showed the formation of cones. The laser ablated HTS target surface has been systematically studied using a scanning electron microscope. A KrF excimer laser with a wavelength of 248 nm was used to ablate the HTS YBCO target. The size of laser beam focused on the target showed a rectangular shape of $9.7{\times}2\;mm^2$. The image of SEM shows the difference between the shapes of cones fanned at the boundary and at the center of the ablated area after 1,000 laser pulses.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.93-102
• /
• 1996

Laser-induced plume and laser-target interaction during pulsed laser deposition are demonstrated for a lead zirconate titanate (PZT). A KrF excimer laser (wavelength 248nm) was used and the laser was pulsed at 20Hz, with nominal pulse width of 20ns. The laser fluence was~$16J/cm^2,$ with 100mJ per pulse. The laser-induced plasma plume for nanosecond laser irradiation on PZT target has been investigated by optical emission spectra using an optical multichannel analyzer(OMA) and by direct observation of the plume using an ICCD high speed photography. OMA analysis showed two distinct ionic species with different expansion velocities of fast or slow according to their ionization states. The ion velocity of the front surface of the developing plume was about $10^7$cm/sec and corresponding kinetic energy was about 100eV. ICCD photograph showed another kind of even slower moving particles ejected from the target. These particles considered expelled molten parts of the target. SEM morphologies of the laser irradiated targets showed drastic melting and material removal by the laser pulse, and also showed the evidence of the molten particle ejection. The physics of the plasma(plume) formation and particle ejection has been discussed.

• 한국음향학회지
• /
• 제16권1호
• /
• pp.39-46
• /
• 1997

본 논문에서 XeF, KrF 엑시머레이저 펄스에 의해 금속에서 여기되는 광음향신호를 PZT 변환기로 검출하여 광음향 변환 메카니즘과 지향성패턴을 분석하였다. 고체에서 레이저펄스에 의한 광음향 변환 매카니즘은 조사되는 레이저의 에너지밀도에 따라 열탄성영역과 플라즈마영역으로 나뉘며 두영역에서 서로 다른 양상을 보인다. 열탄성영역에서는 표면과 수평방향의 변위가 크고 플라즈마영역에서는 반사력으로 인해 수직방향의 변위가 크게 나타나는 것으로 모델링되며 이를 중심파장 480nm의 XeF엑시머레이저와 248nm의 KrFdprtlajfp이저를 사용하여 실험적으로 증명하였다. 또한 열탄성 영역에서 최대종파에너지는 $60^{\circ}$, 최대횡파에너지는 $30^{\circ}$부른에서 나타났고 플라즈마영역에서는 최대 종파와 횡파에너지가 각각 $0^{\circ},\;30^{\circ}$부근에서 나타나는 지향특성을 보였다.

• 한국레이저가공학회지
• /
• 제5권3호
• /
• pp.9-13
• /
• 2002

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 추계학술발표대회 논문개요집
• /
• pp.61-64
• /
• 2002

• Journal of Information Display
• /
• 제4권4호
• /
• pp.1-3
• /
• 2003

For excimer laser annealing (ELA), energy density, number of pulses, beam uniformity, and condition of initial amorphous Si (a-Si) films are significant factors contributing to the final microstructure and the performance of low-temperature polycrystalline Si (LTPS) TFTs. Although the process and equipment have been significantly improved, the environmental factors associated with initial amorphous Si (a-Si) films and process conditions are yet to be optimized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1739-1743
• /
• 2006

Recent advances in the microstructural modification of metal films using excimer laser projection irradiation and lateral resolidification are discussed. Pure copper films have been directionally resolidified into large sheet-like grains when properly encapsulated for suppression of liquid-phase dewetting. A survey and quantitative assessment of the defects found in these icrostructures, typical for rapidly solidified metals, is presented.

• ETRI Journal
• /
• 제11권4호
• /
• pp.128-138
• /
• 1989

광을 이용한 축소투영 노광기술은 고 NA와 단파장화에 의하여 현재 $0.5\mum$의 패턴형성을 가능하게 하고 있으며, 향후 excimer laser를 이용한 stepper는 64M DRAM 제조를 위한 핵심 노광장비가 될 것이다. 본 논문에서는 광을 이용한 노광장비의 성능개선을 위하여 노광방식에 따라 장비를 분류하고 MTF, coherence 등 패턴형성에 있어서의 주요개념을 정리하였다. 그리고 광노광 장비의 성능변수인 해상도, 촛점심도, 노광영역 및 정렬에 영향을 미치는 요소를 분석한 후 그 성능에대한 개선방안을 도출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.459-461
• /
• 1990

Me performed an experiment about preionization electron number density of charge transfer type KrF excimer laser. At the total pressure of 1.8 and 2.2 atm with helium (He) buffer gas, the experimental range of the electron number density is 8-9 ${\times}$ 10 cm The distance between electrode and preionization pin is 15 mJ at charging voltage of 27kV,gas pressure of 2.2 atm,gas mixture of F /Kr/He = 0.3/396.7(%).