• 수산해양기술연구
• /
• 제19권1호
• /
• pp.33-39
• /
• 1983

폐쇄적인 지형구조를 보이는 여자만에서 환경조사 및 어장관리를 위한 해양물리학적 기초자료를 얻기 위하여, 1982년 10월 30일부터 11월 6일까지 만구에서 실시한 측류판추적 및 유속계에 의한 측류자료를 사용하여 해수교류 및 교환량을 추정하고 그 해수교환특성을 알아보았다. 여자만의 평균용적(1.96km super(3))에 대하여 유입량은 43%(조차, 320cm), 유출량은 42%(조차, 304cm)였다. 이로부터 얻은 항류성분은 약 3.7$\times$10 super(7)m super(3)로서 대부분이 담수유출량으로 해석된다. 물질수송에 기여한다고 생각되는 평균해수교환량은 만의 용적(2.33km super(3); 평균고조면 3.1m 기준)에 대하여 썰물 때 1.97$\times$10 super(6) cm super(2)/sec, 밀물 때 1.69$\times$10 super(6) cm super(2)/sec였다. 썰물 때 확산계수가 큰 것은 교환능률이 컸음에 기인하여, 썰물 때 shear분산효과가 크다고 생각된다.

• 한국미생물·생명공학회지
• /
• 제40권2호
• /
• pp.157-162
• /
• 2012

In this study, we have for the first time applied increased surface area fractional precipitation in order to decrease the particle size of the anticancer agent paclitaxel from plant cell cultures. When compared with the case where no surface area increasing material was employed, the addition of ion exchange resin as a surface area increasing material resulted in a considerable decrease in the size of the paclitaxel precipitate. When ion exchange resin was used, the paclitaxel particles were four to five times smaller, having less than a 20 ${\mu}m$ radius, than those obtained in the absence of ion exchange resin. This is presumably because the growth of paclitaxel particles was impeded by the addition of ion exchange resin. The size of the paclitaxel precipitate also depended on the material used to increase the surface area, a result considered to be due to differences in the affinity between the particular ion exchange resin used and the paclitaxel particles. The yield of paclitaxel was significantly improved when ion exchange resin was used as a material to increase surface area. Paclitaxel, with a reduced particle size due to the addition of a surface area increasing material during the fractional precipitation process, is believed to be particularly useful for practical applications of the drug.

• 한국수산과학회지
• /
• 제43권4호
• /
• pp.331-339
• /
• 2010

Shrimp farming is the most important mariculture industry on the west coast of South Korea. However, it has suffered from mass mortality due to viral disease outbreaks and coastal pollution due to water discharge. This study developed an intensive shrimp culture method for outdoor ponds, without water exchange, which minimizes the chance of viral transmission from the environment, reduces coastal pollution by water discharge and enhances shrimp production. A culture trial was conducted in two high-density polyethylene (HDPE)-lined ponds with a $550\;m^2$ surface area. The ponds were stocked with postlarvae of Litopenaeus vannamei, the major farmed shrimp species in Korea, on July 10, 2007, and cultured for 90 days with no water exchange. The stocking density of the postlarvae (B.W. 0.0015 g) was $272\;ind./m^2$, which is eight times higher than in traditional pond culture in Korea. At harvest, the total production of ponds 1 and 2 was 1,362kg ($2.48\;kg/m^2$) and 1,282 kg ($2.33\;kg/m^2$), respectively. This is 20~22 times higher than the mean farmed shrimp production ($0.112\;kg/m^2$) in Korea and about eight times higher than in traditional ponds with a good harvest. Although there was no water exchange throughout the culture period, the mean concentrations of unionized ammonia and nitrite-nitrogen were as low as 0.038 and 6.0 mg/L, respectively. The feed conversion rate (FCR) was 1.38, which is 20~45% lower than that of traditional pond cultures. The high efficiency of the diet in this study is thought to be due to a well-managed feeding strategy and well-developed bioflocs used as diet additions for the shrimp. The final body weight of the shrimp at harvest was low (12.2~12.5 g), compared with that of traditional pond culture. This may have resulted from the combination of a short culture period, high density of shrimp, and low temperature. This study suggests that a super-intensive shrimp pond culture method using biofloc technology with no water exchange can minimize viral transmission via water exchange, reduce coastal pollution, and enhance shrimp production.

• 생물환경조절학회지
• /
• 제10권1호
• /
• pp.10-14
• /
• 2001

포그냉방시스템의 냉방효과는 온실 내부의 상대습도, 공기유동과 밀접한 관계가 있다. 냉방설계용 VETH선도에서 냉발효율은 환기회수의 증가와 그에 상응하는 분무수량의 증가로 인하여 개선될 수 있다. 시간제어방식을 이용한 무차광 실험온실에서 분당 환기회수가 평균 0.77회, 분무수량이 2,009g 일 때 온실 내부의 기온이 31$^{\circ}C$로 외부기온과 거의 같게 나타났으며, 이 때의 증발효율은 82%이다. 분당 환기회수가 평균 0.26회, 분무수량이 1.256g인 경우 무냉방 온실의 기온과 비슷한 37.1$^{\circ}C$였다. 차광율 70%인 실험온실의 분당 환기환수가 평균 2.59회, 분무수량이 2,009g 일 때, 내부의 상대습도는 증가하나 기온은 하강하지 못했다. 그러나 분당 환기회수가 평균 2.33회, 분무수량이 2,009g인 경우 내부의 기온이 31.4$^{\circ}C$로 이 때 온실의 유입구 풍속은 최고 1.9m.s$^{-1}$였다. 시간제어의 경우 일정간격으로 일정한 수량을 분무하기 때문에 분무입자가 모두 증발하지 못하고 온실 내부에 누적되어 온실 내부의 상대습도를 증가시켜 냉방효율을 감소 시키는 원인이 되고 차광망이 온실내부의 공기흐름을 차단하여 증발효율을 감소시키는 것으로 나타났다. 포그냉방시스템의 냉방효율을 높이기 위해서는 온실 내부의 상대습도에 의한 제어방식과 내부 공기의 순환에 대한 연구가 필요하다.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.112-116
• /
• 2006

Caprolactam is the most important raw material for making Nylon 6 fibers and its quality directly determines the quality of Nylon. So it is necessary to study the techniques and methods to remove the colorful impurities from caprolactam. In this paper, the decolorization of caprolactam aqueous solution by anion exchange resins was studied and the decoloring abilities of five commercial resins were investigated. The regeneration of the resins was also studied, too. This study shows that the resin AMTX202 have excellent decoloring ability in the column experiment and that the decoloring efficiency is correlated with the volume of resins packed and is slightly affected by the flow rate and regenerating times. The fact that the resins can be regenerated and reused without affecting the efficiency of decolorization will decrease the cost of the treatment and operation in the industry. The adsorption of colored compounds with anion exchange resins in the packed columns seems to be technically feasible.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.499-504
• /
• 1989

Coloring effect, mechanical properties resulting from silver ions exchange of glasses immersed into the mixed molten salt of KNO3 and AgNO3 were investigated in this study. Ion exchange coloring of glasses made it possible to obtain glasses with a range from yellow to yellowish-brown, and spectral transmittance was investigated. The amount of ion exchange and peneration depth increased with treatment temperature and time. The activation energy decreased with mole fraction of AgNO3. It can be seem that the bending strength of ion exchanged glasses were 3~4 times higher than the parent glass and Ag+ colloids prevented from increasing surface microhardness.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.49-53
• /
• 2019

The temperature distribution and lifetime of molds were predicted by computer simulation analysis with various spraying and blowing process of high pressure die casting. After varying the spraying angle and time, the mold temperature, heat exchange and mold life were predicted. As the spraying angle increases, the maximum temperature of the mold decreases, which is because the spraying area increases and the heat exchange with the mold increases. Heat exchange occurs more actively in the blowing process than in the spraying process. This is because the cooling is not performed due to the steam generation. When the spraying angle is 50 degree, the minimum life of the mold is analyzed 200 times. After adjusting the blowing time from 5s to 3s, the minimum lifetime of the mold has been increased almost twice.

• Journal of Magnetics
• /
• 제11권2호
• /
• pp.70-73
• /
• 2006

The magnetization angle and thickness dependence of magnetic anisotropy in the exchange-biased [Pd/Co]${\times}$5/FeMn multilayers with an out-of-plane anisotropy were investigated to determine the origin of perpendicular exchange biasing. As the Co thickness increased to 1.5 nm in the [Pd(0.8 nm)/Co(t)]${\times}$5/FeMn(120 nm) films, the hysteresis loops were converted from square loops at a thin Co (<0.4 nm) to complicated round ones at a thick Co. The irregularly asymmetric step (IAS) at the left top of the loop appeared in the loop of the 0.6-nm Co film due to an inhomogeneity in the exchange anisotropy. As the Pd thickness increased to 1.6 nm, the step disappeared, and the perpendicular magnetic anisotropy was maximized in the Co thickness between 0.6 and 0.9 nm. The conversion of the magnetization loop along the magnetization angle coincided with the equation $H_{(eff)}=H_o\;cos{\theta}$. The IAS of the 0.8-nm Pd film disappeared after thermal annealing up to $200^{\circ}C$ under an external magnetic field.

• 공업화학
• /
• 제10권2호
• /
• pp.206-211
• /
• 1999

본 연구에서는 NaCl수용액의 초저이온 농도범위 ($1.0{\times}10^{-4}M$ 이하)에서 양이온 교환수지 대 음이온 교환수지의 비, 수지량, 계의 온도를 함수로 한 혼합층 이온교환의 거동을 실험적으로 연구하였다. 실험실 크기의 연속흐름 칼럼을 통하여 양이온 교환수지와 음이온 교환수지의 교환능이 소모될 때까지의 유출농도를 처리된 유량의 함수로 측정하여 파과곡선을 구하였다. 초기누출은 수지량이 적은 경우 양이온과 음이온의 파과곡선에 나타났으나, 선택도계수가 낮은 양이온의 파과곡선에 현격하게 크게 나타났다. 선택도계수는 파과곡선의 기울기에 영향을 미쳤으며, 계수값이 큰 음이온의 파과곡선의 기울기가 급격하였다. 온도변화는 파과곡선의 기울기에 영향을 미쳤으며, 온도가 증가할수록 이온교환속도가 증가하였다. 이 온도효과는 수지비에 관계없이 수지총량이 증가할수록 또는 이온교환수지의 교환능이 감소하여 파과곡선이 평형에 가까워질수록 감소하였다.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.731-736
• /
• 2010

본 연구에서는 post sulfonation 반응을 통하여 SBS 양이온교환막을 제조하였다. 술폰화 양이온교환막의 술폰화도, 함수율, 이온교환용량, 전기저항 및 전기전도도등 막의 전기적 특성을 술폰화 시간을 변수로 하여 확인하였다. 술폰화 SBS 막의 술폰화도는 반응시간 및 황산의 농도가 증가함에 따라 증가하였으며 최대 술폰화도는 24.0%이었다. 또한 막의 함수율과 이온교환용량은 술폰화도가 증가함에 따라 증가하였으며 각각 41.2%, 0.80 meq/g로 가장 높았으며, 전기저항과 전기전도도는 각각 $23.6{\Omega}{\cdot}cm^2$, $4.24{\times}10^{-4}S/cm$이었다.