• 식품보건융합연구
• /
• 제5권3호
• /
• pp.7-20
• /
• 2019

The use of caffeine as a psychoactive stimulant in tea has been observed to have serious negative effects in humans' systems such as respiratory, nervous, cardiovascular, renal and skeletal systems. This study was carried out to assess the levels of caffeine in 10 different tea brands available in local market in Dutse, Jigawa State, Nigeria. Quantitative analysis of caffeine was performed by a simple and fast UV-Vis spectrophotometric methods using different solvents for extraction. The caffeine content in all the tea samples analyzed in this study were below the maximum allowable limits set by the USFDA. Tea have been associated with adverse health effects and the claims made by manufacturers about the benefits of tea do not highlight risks associated with excessive consumption of a combination of the ingredients contained in tea. Long term effects of tea consumption of children and young people have not been adequately studied. Therefore, it is recommended that further research be carried out on the adverse effects of energy drinks on children. Research is also needed to be done on the effects of the combination of ingredients on health and excessive consumption of those ingredients to children and adolescents. People need to be educated and given proper awareness on the health risks associated with caffeine containing beverages.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.573-587
• /
• 2023

A conventional tuned mass damper (TMD) provides a passive control option to suppress the structures' wind- or earthquake-induced vibrations. However, excessive displacements of the TMD raise concerns in the practical implementation. Therefore, this study proposes a novel TMD designed for and deployed on a high-rise sightseeing tower. The device consists of an integrated two-way slide rail mount and an eddy current damper (ECD) with a stroke control mechanism. This stroke control mechanism allows the damping coefficient to automatically increase when the stroke reaches a predetermined value, preventing excessive damper displacements during large earthquakes. The corresponding two-stage damping parameters are designed with a variable-thickness copper plate to enable the TMD stroke within a specified range. Thus, this study discusses the detailed design schemes of the device components in TMD. The designed two-stage damping parameters are also numerically verified, and the structural responses with/without the TMD are compared. As seen in the results, the proposed TMD yields effective control authority to limit the acceleration response within a comfort level. In addition, this TMD resolves the spatial availability for the damper movement in high-rise buildings by the controllable damping mechanism.

• 대한통합의학회지
• /
• 제12권3호
• /
• pp.155-161
• /
• 2024

Purpose : Wearing high-heeled shoes leads to foot and ankle instability, which requires leg muscles to remain in constant contraction. In order to adapt to the instability of the feet and ankles caused by wearing high heels, the muscles of the legs continuously repeat contraction and relaxation. Previous studies of the impact of stair climbing in high-heeled shoes have involved placing the entire stepping area of the shoe on the stair. However, high-heeled shoe wearers sometimes unconsciously contact the stair using only half of the stepping area. Therefore, the objective of this study was to examine differences in leg and ankle muscle activation according to stepping area during stair climbing in high-heeled shoes. Methods : Twenty young women in their early 20s voluntarily agreed to participate in this study. We used surface electromyography to measure gastrocnemius and tibialis anterior activation in the right leg during stair climbing under three conditions: barefoot, using half of high-heeled shoe stepping area, and using the total of high-heeled shoe stepping area. Barefoot, half of high heeled shoe, and total of high-heeled shoe were used to evaluate the effects of different areas of the foot or high heels touching the stairs. Results : Both muscles showed significant activity differences among the three stair climbing conditions. Gastrocnemius activity was significantly different between the high-heeled shoe conditions (p= .032), and tibialis anterior activity was significantly different between barefoot stair climbing and climbing with half of the high-heeled shoe stepping area (p= .021). Conclusion : The stepping area increased as heel size increased, thus increasing excessive gastrocnemius and tibialis anterior activity to control excessive ankle joint movement. We infer that using half of the high-heeled shoe stepping area prevents muscle fatigue by reducing excessive leg and ankle muscle activation.

• 복식
• /
• 제58권8호
• /
• pp.74-90
• /
• 2008

Since the late of 20th Century, philosophy, art, and aesthetics have attention to the movement of object that persue the dynamics and qualitative change, not existing fixed and quantitative object. Qualitative continuity, including discontinuity of specific spot and surface that occurs sudden change, is distinct characteristics considered in contemporary logo civilization, which combines and disperses according as various purpose among the different elements and objects. Therefore, I studied about the characteristics of qualitative continuity that creates the change and the differentiation continuously through the "formative characteristics of the continuity expressed in contemporary fashion" of my preceding paper. This paper is the following study of above mentioned paper, and Investigates about aesthetic consciousness leading to the various change. This is intends to consider the trans-aesthetic consciousness that accepts dynamic movement and change the different object and reforms new relationship continuously. This studies' conclusion is as follows; 1) sublimity-Infinity, de-constructive, excessive 2) jouissance - functional, structural 3) paradox-perceptual, spatial. A study about the trans-aesthetic consciousness would help to offer philosophical basis, and make a change building aesthetic foundation in explaining various relationship like as phenomenon of the retro, neo, post, fusion expressed since the late of 20th Century.

• 한국동물학회지
• /
• 제1권2호
• /
• pp.17-24
• /
• 1958

Since Kesser first described in 1934 the functional change of the autonomic nervous system caused by certain visible rays many researchers have unanimously approved that animals flashed with a red visible ray develop parasympathicotony while those flashed with a blue visible ray develop sympathicotony. On the other hand through studies made by our colleagues it is now well known that the inner-movement of the retinal pigments of frogs is stimulated in sympathicotony and is in reverse inhibited in parasimpathicotony. It is almost evident that the mechanism by which the inner-movement of the retinal pigments is due to sympathicotony derived from the excessive secretion of adrenalin. In addition , through may recent experiments on the pharmacological action of various medicines on the retinal pigments reaction of tadpoles , ranging from the excessive secretion of adrenalin. In addition , through my recent experiments on the pharmacologtical action of various medicines on the retinal pigments reaction of tadploes, raging from every developmental stage , Ifound that the movement of the retinal pigments by adrenalin is predominant in the earlier developmental stages of taopoles around 11 mm of body length, whereas other medicines fail to give any responce to the retinal pigments in such an earlier stage. When tadpoles grown to body length of 15-16m the retinal pigments move to the complete light position while kept in adrenalin solution. Based on these facts it might be well to consider that if tadpoles were grown under the visible rays for a given period, they might show a functional change of the autonomic nervous system and thereby cause of certain change in the physciological phases of the retinal reaction. Experiments were undertaken to find this matter and also to discover the simultaneous effects of the visible radiations on the developmental process of tadpoles. The results summarized as follows ; 1. The longest wave of visible rav has an effective reaction on the growth of body length of taopoles, while the shortest wave of visible ray causes the same for the metamorphoric differentiation of tadpoles. 2. When keeping two groups of tadpoles the first group of 15 mm body length grown for the period of one week and the latter group of 20 mm body length grown for two weeks under the various visible rays. swimming in adrenalin solution, the inner-movement of the retinal pigment occurs in both groups. The movement of pigments of the first group is accelerated in a sequence of blue ray \ulcorner green ray > brown ray> red ray, and that of the latter group is also accelerated in a sequence of blue ray>green ray > brown ray and red ray. 3. When keeping tow groups of tadpoles, the first group of 20 mm body length grown for the period of two weeks, the latter group of 25 m body length grown for three wheeks, under the various visible rays in sunlight, the inner-movement of the retinal pigments occurs in both groups. The movement of pigments of the first group is accelerated in a sequence of blue ray> green ray>brown ray and red ray, and that of the latter group is also accelerated in a sequence of blue ray > brow ray>red ray. 4. In order words, there facts manifest that tadpoles grown under the various visible rays reveal functional disturbances of the autonomic nervous system, at the time of 15 mm body length by adrenalin solution, which is a unique indicator illustrating the status of sympathicotony, and at the time of 20 mm body length by sunlight. This means that the longest visible ray cause sympathicotony, while the shortest visible ray causes parasympathicotony.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.515-525
• /
• 1994

Impression taking is a very important procedure in complete denture fabrication for reproduction of the tissue surface from which obtain retention and support of denture base. Therefore, we can not construct retentive denture without precise impression taking. Retention in complete denture can be obtained by the closest contact between denture base and underlying tissue, maximum coverage and proper displacement of the border tissue for peripheral sealing. Therefore, it is very important to take impression of the border tissue displaced properly. Nowadays, impression of the border tissue is mainly taken by the border molding techniques by means of manual muscle trimming, but due to various muscle trimming methods as clinicians, it is difficult to select proper method. This technique is also bodersome to do and time-consuming procedure. Retention is also likely reduced, because of the recording excessive muscle movement than actural physiological border tissue movement. Therefore, the impression technique that records actual physiologic functional muscle movement is helpful to increase denture retention and easy to do. We named this technique a functional border molding technique. This technique is originally introduced by D. J. Neill and R. I. Nairn in 1968. We tried to fabricate complete denture by the impression by means of functional border molding technique for better retention and the convenience, and obtained good results.

• 대한치과교정학회지
• /
• 제43권3호
• /
• pp.147-158
• /
• 2013

This article describes the orthodontic treatment of a 31-year-old Korean female patient with gummy smile and crowding. The patient showed excessive gingival display in both the anterior and posterior areas and a large difference in gingival heights between the anterior and posterior teeth in the maxilla. To correct the gummy smile, we elected to intrude the entire maxillary dentition instead of focusing only on the maxillary anterior teeth. Alignment and leveling were performed, and a midpalatal absolute anchorage system as well as a modified lingual arch was designed to achieve posterosuperior movement of the entire upper dentition. The active treatment period was 18 months. The gummy smile and crowding were corrected, and the results were stable at 21 months post-treatment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.531-536
• /
• 2001

The structural shape optimization is a useful tool for engineers to determine the shape of a structure. During the optimization process, relocations of nodes happen successively. However, excessive movement of nodes often results in the mesh distortion and eventually deteriorates the accuracy of the optimum solution. To overcome this problem, an efficient method for the shape optimization has been developed. The method starts from the design domain which is large enough to hold the possible shape of the structure. The design domain has pre-defined uniform fine meshes. At every cycle, the method judges whether all the elements are inside of the structure or not. Elements inside of the structure are assigned with real material properties, however elements outside of the structure are assigned with nearly zero values. The performance of the method is evaluated through various examples.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.80-88
• /
• 1997

The attempt to enhance the strength of materials has been an important subject for materials engineering and scientists. The strength of materials is termed as the ability to support high load without excessive deformation and without breaking catastrophically. The control of dislocation densities and barriers to the movement of dislocations have been considered to be the important methods for the strengthening materials. One of the approaches is mechanical blocking of dislocations by alternately depositing material layers. The typical structure of materials is multilayered and laminated composites. The thickness of each layer is typically in the range of nanometer. Ton avoid confusion with other terminology they may be defined as microlaminate composite materials. The manufacturing process of multilayered laminate structure will be introduced. And the current theoretical theories will be reviewed in view of strengthening of microlaminte composite materials.

• 소성∙가공
• /
• 제7권4호
• /
• pp.382-392
• /
• 1998

Computer simulations and test trials were carried out to obtain the optimal stamping conditions of the die design of the laser welded automotive body. The stamping process including gravity deflection bead calibration binder wrap, forming and spring back was simulated and compared with the results obtained from test trials. The production variables were determined from a preliminary operation and they were investigated in the simulation and the test trials. The formability was tested under the various conditions, such as the initial position of blank, blank holding force, corner radius and the shape of drawbead. Sound products without fracture, wrinkling and excessive weldline movement were produced by applying results obtained this investigation.