• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.305-318
• /
• 2014

This paper numerically investigates the feasibility of an active mass damper (AMD) system using the time delay control (TDC) algorithm, which is one of the robust and adaptive control algorithms, for effectively suppressing the excessive vibration of a building structure under wind loading. Because of its several attractive features such as the simplicity and the excellent robustness to unknown system dynamics and disturbance, the TDC algorithm has the potential to be an effective control system for mitigating the vibration of civil engineering structures such as buildings and bridges. However, it has not been used for structural response reduction yet. In this study, therefore, the active control method combining an AMD system with the TDC algorithm is first proposed in order to reduce the wind-induced vibration of a building structure and its effectiveness is numerically examined. To this end, its stability analysis is first performed; and then, a series of numerical simulations are conducted. It is demonstrated that the proposed active structural control system can effectively reduce the acceleration response of the building structure.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.302-308
• /
• 2021

Developers generally use test standards suggested by military standards such as MIL-STD-810G when performing vibration tests in the materiel development. However, according to MIL-STD-810G, it is recommended to test by tailoring the test standard suitable for the developed materiel, and it is specified to apply the suggested test standard only when there is difficulty in tailoring. In addition, the test standards presented by MIL-STD-810G are standards created under operating conditions different from the actual operating environment of each developed materiel, so the test according to this standard may be excessive or understated. Therefore, the developer must create an appropriate vibration test standard for the developed materiel as similar to the operating conditions as possible. In this paper, the procedure for creating the functional test standard and durability test standard suitable for the operating environment of the equipment to be mounted on the propeller aircraft under development is described, and the created standard is introduced.

• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.577-588
• /
• 2022

Oil refineries' Fluid Catalytic Cracking Units (FCCU) when in full operation may exhibit strong fluid dynamics caused by turbulent flow in the piping system that may induce vibrations in other mechanical and structural components of the Unity. This paper reports on the experimental-theoretical-computational program performed to get the vibration properties and the dynamic response amplitudes to find out alternative solutions to attenuate the excessive vibrations that were causing fatigue fractures in components of the bottle like reactor-regenerator of an FCC unit in operation in an existing oil refinery in Brazil. Solutions to the vibration problem were sought with the aid of a 3D finite element model calibrated with the results obtained from experimental measurements. A short description of the found solutions is given and their effectiveness are shown by means of numerical results. The solutions were guided by the concepts of structural stiffening and dynamic control performed by a nonlinear pendulum controller whose mechanical design was based on parameters determined by means of a parametric study carried out with 2D and 3D mathematical models of the coupled pendulum-structure system. The effectiveness of the proposed solutions is evaluated in terms of the fatigue life of critical welded connections.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.371-377
• /
• 2007

본 논문에서는 진동대를 이용하여 고층 건축물의 수평진동에 대한 지각임계가속도를 측정하였다. 바람에 의한 초고층 건축물의 과도한 진동은 거주자들에게 시각차와 현기증 같은 불쾌감을 줄 수 있다. 초고층 건축물 거주자들에게 쾌적한 환경을 제공하기 위해서는 가속도를 제한할 필요가 있다. 초고층 건축물은 1차 고유주기에 지배적이다 본 연구진은 1차 고유주기를 재연하기 위해 진동대를 사용하여 사인파진동에서 실험을 수행하였다. 실험은 진동하우스를 제작하고, 건장한 40명의 피험자를 대상으로 실시하였다 40명의 피험자를 8명씩 5개조로 나누고, 특정주파수범위$(0.2Hz{\sim}1.2Hz)$에서 가속도를 증가시키면서 수평진동에 대한 인지도를 측정하였다. 수평진동실험으로 피험자들의 진동에 대한 인지도를 누적분포표로 만들고, $0{\sim}20%,\;21{\sim}40%,\;41{\sim}60%,\;61{\sim}80%,\;81{\sim}100%$의 누적분포에 대해 추세선을 그려서 성능평가곡선을 작성하였다.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.961-971
• /
• 2008

In the design of a rotor shaft, care should be taken to minimize vibration by taking into account the sources of vibration. In addition, the intensity critical speed, stability, and other related aspects of the system must be considered. especially when it is operated at a critical speed, it is important to address issues related to vibration, as an increase in the whirling response of the rotor shaft can cause damage to the shaft, destruction of the rotor parts, and detrimental abrasions on the bearings. In this thesis, the vibration characteristics of a rotor shaft are investigated through the use of the finite element method. Variations of the diameters and lengths were used to determine the effect of a rotor shaft using Beam No.188(3D linear strain beam) in ANSYS version 11.0 as a universal interpretation program for finite elements. Special care was taken to prevent excessive vibration, which can result from resonance at the initial stage, in the formulation of a dynamic design for a rotor shaft through calculations while changing the diameters and the lengths of the shaft. Moreover, the dynamic characteristics of the critical speed, total mass, D/L(diameter to length) ratio, and natural frequency were verified. Furthermore, the rotor shaft applied by bearing element was calculated and compared by using Combi No. 214(2-D spring-damper bearing).

• 한국지반공학회논문집
• /
• 제23권3호
• /
• pp.25-40
• /
• 2007

얕은 터널의 개착식 터널 라이닝에 발생하는 과잉토압은 라이닝의 변형과 손상을 유발하는 역학적 주요인자들 중의 하나이며(Kim, 2000), 과잉토압은 되메움토의 다짐불량, 자중에 의한 압밀, 강우의 침투에 의한 다짐, 차량에 의한 진동 등에 의해 발생할 수 있다(Komiya et al., 2000; Taylor et al., 1984; Yoo, 1997). 터널 라이닝에 발생하는 토압을 구하기 위한 많은 시험이 행해졌지만, 부등침하와 과잉토압을 줄일 수 있는 보강대책을 수립하기 위한 사례는 없다. 본 연구는 모래 지반에 $1.0D\sim1.5D$ 깊이에 개착식으로 시공하는 원형의 강성 터널에 작용하는 토압에 관한 것으로 진동다짐의 영향을 모형실험에서 충분히 반영하기 위하여 100Hz의 진동주파수를 사용하였다. 본 연구에서는 개착식 터널 라이링에 작용하는 부등침하와 과잉토압을 줄이기 위해서 지오텍스타일 매트를 설치하였다. 지오텍스타일 매트의 보강에 의한 부등침하와 토압의 감소효과를 확인하기 위해 실내모형실험을 수행하였다. 실내모형실험에서 토피, 매트 보강형태, 절취면의 거칠기 등을 달리하여 가장효과적인 방법을 구하였다. 절취면의 거칠기 달리하기 위해 사면에 사포#100, 사포#400과 acetate 부착하였습니다. 무보강과 매트 보강에 대한 모형실험을 실시하여 구한 토압을 비교하여 매트 보강효과를 살펴보았으며, 사진분석법(Park, 2003)을 이용하여 지반의 변형을 분석하였다.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.11-20
• /
• 2014

Purpose: Walking type cultivator used for weeding generated excessive handle vibration as well as bouncing motion depending on the weeding speed. This research was conducted to define a design factor of the rotary weeding blades for reducing soil reaction forces as well as hand vibration. Methods: The motion and forces acting on the rotary blades were reviewed to find out the most influencing parameter on hand vibration. The installation angle (IA) of the blade was selected and analyzed to determine the condition of no reaction force less. For removing the unnecessary upward soil reaction, the design factor theory of weeding blade was suggested based on geometrics and dynamics. For evaluation of design factor theory, the experiment in situ was performed base on ISO 5349:1. The vibration $a_{hv}$ and theoretical value $X_{MF}$ were compared with two groups that one was positive group ($X_{MF}$ > 0) and the other was negative group ($X_{MF}$ < 0). Results: $X_{MF}$ was derived from rotational velocity, forward velocity, disk diameter, weeding depth, blade's width and IA of blade. Two groups had significant difference (p < 0.05). In aspect of the group mean total exposure duration, positive group was 17.53% bigger than negative group. When disk radius 100, 150 and 200 mm, minimum IAs were $4{\sim}27^{\circ}$, $3{\sim}15^{\circ}$ and $2{\sim}10^{\circ}$, respectively. A spread sheet program which calculated XMF was developed by Excel 2013. Conclusions: According to this result, minimum IA of weeding blade for soil reaction reduction could be obtained. For reduction hand-arm vibration and power consumption, minimum IA is needed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.92-99
• /
• 1998

Unsteady flow problems created by hydraulic transients in pipeline systems with pump are of significant importance because they can cause excessive pressure, cavitation, vibration and noise. In this paper, an analysis of transient flow for the pump pipelines is developed by means of the characteristic method. The calculated results of the program to simulate water hammer due to sudden valve closure in a simple pipeline are compared with those of the analytical method. Expecially the water hammer due to power failure in pump pipeline system with surge tank was simulated. As the results, both the upsurge and the downsurge along the pipeline are reduced.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.208-217
• /
• 1999

This paper presents spectrum analysis technique to identify abnormal noise produced in diesel railcars. Coherence and coherent power spectrum are very useful in determining source identifications. Experiments are applied to two different cars with similar phenomena about the case of stop and running condition. Metal contact in mounting bracket part which is excited by excessive transmission vibration is found to cause abnormal noise.

• 소음진동
• /
• 제3권3호
• /
• pp.192-198
• /
• 1993

옥외에서 발생하는 소음은 음원과 수음점 사이의 시선을 차단하는 장애물을 설치하는 방법이외에는 달리 방도가 없는 경우가 많다. 빛과 마찬가지로 소리도 시선이 차단되면 소리의 그늘이 지는데 빛의 경우보다는 상당히 강한 음장이 이 그늘에 존재한다. 그늘 영역에서의 음장은 소리의 회절현상에 기인하는 것으로서 회절음장은 곧 방음벽의 차음효과를 좌우한다. 방음벽의 차음효과는 잉여감쇠(excessive attenuation)로 표시되는데 잉여감쇠에 영향을 주는 인자는 방음벽의 기하학적 조건, 음향학적 성질, 설치지면, 주변지형, 풍속 및 온도분포와 같은 기상조건, 음원의 특성 등 다양하지만 가장 기본적인 인자는 기하학적인 조건이다. 본고는 방음벽의 원리에 국한하여 살펴보기 위해 기술된 것이므로 주로 판 또는 쐐기 형태의 물체에 의한 회절현상을 취급하였다.