• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.247-250
• /
• 2011

The excess volumes of mixing of benzyl alcohol and halothane in vesicle and in suspensions of several lipids have been determined at $25^{\circ}C$ it using a excess volume dilatometer. The potency of general anesthetics has long been known to correlate with lipid solubility. Denaturations of the vesicle, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by absorption changes at 280 nm and fluorescence changes at 330 nm and excess volume dilatometer. The particle size analysis of viscous polymer solutions by diffusional interchange is the key step by measurement. The excess volume of mixing in chitosan was found to be negative, whereas them of purple membrane, Halobacteriun Halobium and red membrane were positive in benzyl alcohol and halothane. This result was confirmed as Miller's supposition.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.472-477
• /
• 2018

The excess molar volumes of a general anesthetics on Purple membrane and Red membrane separated by extraction in Halobacteriun Halobium and in suspensions of vesicle have been determined at $25^{\circ}C$, it was used a excess volume dilatometer. The anesthesia characteristics of general anesthetics, Propofol was fined by our study to correlate with excess molar volume. Excess volume changes of the vesicle measured by excess volume dilatometer, which is an important amino acid and lipid in the purple membrane and red membrane by means of specific weight in Halobacteriun Halobium, were studied by absorption intensity at 280 nm and 330 nm. The particle size analysis and relative turbidity of Purple membrane and Red membrane by means of Propofol were measured for mechanical properties. In the samples where Propofol is incoporated in vesicle, especially, the excess molar volume of PM + RM + Propofol is the greatest than the excess molar volumes of PM, and RM.

• East Asian mathematical journal
• /
• v.29 no.2
• /
• pp.241-254
• /
• 2013

In this paper, we investigate the contents of Rule of Excess and Deficit in the second volume of San Hak Jeong Ui (Arithmetic Definition) compiled by Nam Byong Kil and corrcted by Lee Sang Hyok in the Choson Dynasty period.(Emperor Ko Jong, 1867).

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.20-27
• /
• 2012

Complex permittivity spectra of Allyl Chloride (AC), 2-Butanone (2-BU) and their binary mixtures over the entire range of concentration were obtained using the Time Domain Reflectometry (TDR) technique in microwave frequency range at various temperatures. Static dielectric constant and relaxation time are obtained from complex permittivity spectra. Density ($\rho$) and refractive index ($n_D$) are also measured. These parameters are used to determine excess dielectric constant, excess inverse relaxation time, excess molar volume, excess molar refraction, polarity, Bruggeman factor and thermodynamic parameters viz. enthalpy of activation and entropy of activation. The values of static dielectric constant and relaxation time increases while density and refractive index decreases with the percentage of 2-Butanone in Allyl Chloride increases. Excess parameters were fitted to a Redlich-Kister equation.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.53-57
• /
• 2008

This study examined the role of excess free volume on the corrosion resistance of an amorphous alloy. Corrosion behaviors were monitored on the amorphous alloys, of which amount of free volume was controlled via the isothermal annealing below the glass transition temperature, using immersion tests and potentiodynamic polarization tests in HCl aqueous solutions. It was found that the corrosion resistance of the amorphous alloy is improved by reducing the amount of excess free volume. The possible reason explaining the experimental result was discussed from the viewpoint of the internal energy associated with the annihilation of excess free volume.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.71-76
• /
• 2010

The densities and viscosities of 2-bromopropane-methanol binary mixtures had been determined using an digital vibrating U-tube densimeter and Ubbelohde capillary viscometer respectively from (298.15 to 318.15) K. The dependence of densities and viscosities on temperature and concentration had been correlated. The excess molar volume and the excess viscosity of the binary system were calculated from the experimental density and viscosity data. The excess molar volumes were related to compositions by polynomial regression and regression parameters and total RMSD deviations were obtained; the excess viscosities was related to compositions by Redlich-Kister equation and regression coefficients and total RMSD deviation of the excess viscosity for 2-bromopropane and methanol binary system were obtained. The results showed that the model agreed very well with the experimental data.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.613-618
• /
• 1996

In this paper, M will always denote an n- dimensional complete Riemannian manifold and $\omega_n$ is the volume of $S^n$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.48-57
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of homogeneous charge methane-air mixture under various initial pressure, excess air ratio and ignition times in quiescent mixture. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer and flame propagation acquired by ICCD camera were used to investigate the effect of initial pressure, excess air ratio and ignition times on pressure, combustion duration, flame speed and burning velocity. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to near 0 value gradually after 3 seconds. Combustion duration, flame speed and burning velocity were observed to be promoted with excess air ratio of 1.1, lower initial pressure and ignition time of 300ms.

• Journal of the Korean Society of Combustion
• /
• v.13 no.3
• /
• pp.9-16
• /
• 2008

In this study, a cylindrical constant volume combustion chamber is used to investigate the flow and combustion characteristics of methane-air homogeneous mixture under various initial charge pressure, excess air ratios and ignition times. The flame and burning speed, mean gas speed are calculated by numerical analysis to analyze the combustion characteristics. It is found that the mean gas velocity during combustion has the maximum value around 300 ms and then decreased gradually on the condition of 10000 ms, and that the combustion duration is shorten and flame speed and burning velocity have the highest value under the conditions of an excess air ratio 1.1, an initial charge pressure of 0.2 MPa and an ignition time of 300 ms in the present study. And, the initial pressure and burning speed are in inverse proportion, so that it is in agreement with Strehlow who presented that the initial pressure and burning speed are in inverse proportion when the burning speed is under 50cm/s.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.644-651
• /
• 2021

Alkyl amines are widely used in various industries. Nowadays these are also used in CO₂ capture technology because amines react with CO₂ and remove it from the flue gas. To make the amines more compatible towards this technology, physico chemical properties may be altered by mixing with other solvents. In the present report, we measured the refractive properties of pure diisopropylamine (DIPA) (1) + isomeric butanol (2) at 298.15 K to 308.15 K. The 𝚫n values were positive for DIPA + n-butanol or sec-butanol or isobutanol or tert-butanol mixtures. The measured data was correlated with Redlich-Kister equation. The excess molar volume data were predicted from refractive index data using Nakata and Sakurai model. The experimental data were also predicted by various correlations, and the prediction capability of these correlations was reported through standard deviation. Further, the deviation in refractive index (𝚫n) data was interpreted by the consideration of specific molecular interactions between DIPA and isomeric butanol.