• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.60-68
• /
• 2004

고속으로 비행하는 물체가 다른 물체와 충돌하는 경우에는 극히 짧은 시간에 커다란 변형이 일어나게 된다. 고변형률 변형 (high-strain-rate deformation) 에서는 소성변형이 일어나면서 상당한 열을 발생시키고 재료의 온도를 상승시킨다. 온도의 상승은 재료의 동적인 물성에 많은 영향을 미치게 되므로, 변형 시의 온도상승을 예측하는 것은 매우 중요하다. 변형시의 온도상승은 주로 전위(dislocation)의 움직임과 공공(vacancy)으로 인한 재료내의 저장에너지와 밀접한 관계를 갖게되므로, 저장 에너지의 양을 파악하는 것은 매우 중요하다. 고변형률 변형시 전위가 빠르게 움직이면서 평형상태에서의 경우보다 많은 파공공 (excess vacancies) 을 발생시키게 된다. 본 논문에서는 과공공을 포함하는 미시적 재료 모텔을 구성하고 분자동역학 (molecular dynamics, MD) 기법을 사용하여 면십입방격자 (fcc) 구조를 가지는 재료 (구리)에 대한 저장 에너지를 계산하였다.

• 천문학회보
• /
• 제39권1호
• /
• pp.47.2-47.2
• /
• 2014

Several studies have reported the presence of sodium excess objects having neutral atomic absorption lines at $5895{\AA}$ (NaD) and $8190{\AA}$ that are deeper than expected based on stellar population models that match the stellar continuum. The origin of these lines is therefore hotly debated. van Dokkum & Conroy proposed that low-mass stars (0.3M) are more prevalent in massive early-type galaxies, which may lead to a strong NaI 8190 line strength. It is necessary to test this prediction, however, against other prominent optical line indices such as NaD, Mgb, and Fe5270, which can be measured with a significantly higher signal-to-noise ratio than NaI 8190. We identified a new sample of roughly one thousand NaD excess objects (NEOs; ~8% of galaxies in the sample) based on NaD line strength in the redshift range 0.00$H{\beta}$ line strengths and significant emission lines, which are indicative of the presence of young stellar populations. This result implies that the presence of the interstellar medium and/or dust contributes to the increase in NaD line strengths observed for these galaxies.

• Journal of Biosystems Engineering
• /
• 제25권4호
• /
• pp.293-300
• /
• 2000

Automated greenhouse production system often require crop growth monitoring involving accurate quantification of plant physiological properties. Conventional methods are usually burdensome, inaccurate, and harmful to crops. A thermal image analysis system can accomplish rapid and accurate measurements of physiological-property changes of stressed crops. In this research a thermal imaging system was used to measure the leaf-temperature changes of several crops according to nutrient stresses. Thermal images were obtained from lettuce, cucumber, and pepper plants. Plants were placed in growth chamber to provide relatively constant growth environment. Results showed that there were significant differences in the temperature of stressed plants and non-stressed plants. In a case of the both N deficiency and excess, the leaf temperatures of cucumber were $2^{\circ}C$ lower than controlled temperature. The leaf temperature of cucumber was $2^{\circ}C$ lower than controlled temperature only when it was under N excess stress. For the potassium deficiency or excess stress, the leaf temperaures of cucumber and hot pepper were $2^{\circ}C$ lower than controls, respectively. The phosphorous deficiency stress dropped the leaf temperatures of cucumber and hot pepper $2^{\circ}C$ and $1.5^{\circ}C$ below than controls. However, the leaf temperature of lettuce did not change. It was possible to detect the changes in leaf temperature by infrared thermography when subjected to nutrition stress. Since the changes in leaf temperatures were different each other for plants and kinds of stresses, however, it is necessary to add a nutrient measurement system to a plant-growth monitoring system using thermography.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권5호
• /
• pp.23-29
• /
• 2019

본 연구는 굵은골재의 완전 리사이클 기술개발을 위해서 시멘트계 재료를 이용한 개질 페이스트를 이용하여 원골재의 표면을 코팅하는 표면개질 기술을 적용하고 있다. 이 때에 원골재와 개질 페이스트의 계면은 개질 페이스트의 점착력과 점도에 의존되어 개질골재의 피막두께가 결정된다고 생각할 수 있다. 본 연구에서는 굳지 않은 상태에서의 개질 페이스트의 유동특성을 파악하고 표면 개질골재의 피막 두께에 대해 검토한 결과, 개질 페이스트를 빙엄유체로서 가정하여, 잉여 페이스트 이론과 유동학 정수 (항복치)를 고려하는 것으로 개질 페이스트의 정량적인 피막 두께의 설계가 가능하여, 표면개질 골재를 이용한 콘크리트의 정량적인 배합설계가 가능할 것으로 판단된다.

• 한국주조공학회지
• /
• 제32권5호
• /
• pp.219-224
• /
• 2012

The effects of Mg and Si contents on the microstructure and mechanical properties in Al-Mg alloy (ALDC6) were investigated. The results showed that phase fraction and size of $Mg_2Si$ and $Al_{15}(Fe,Mn)_3Si_2$ phase in the microstructure of Al-Mg alloy were increased as the Mg and Si contents were raised from 2.5 to 3.5 wt%. With Si content of 1.5 wt%, freezing range of the alloy was significantly reduced and solidification became more complex during the final stage of solidification. While there was no significant influence of Mg contents on mechanical properties, Si contents up to 1.5 wt%, strongly affected the mechanical properties. Especially elongation was reduced by about a half with more than 1.0 wt%Si in the alloy. The bending and impact strength were decreased with increased amount of Si in the alloy, as well. The lowered mechanical properties are because of the growth of particle shaped coarse $Mg_2Si$ phase and precipitation of the needle like $\beta$-AlFeSi in the microstructure at the last region to solidify due to presence of excess amount of Si in the alloy.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.116-119
• /
• 2000

The a-axis and c-axis prefer oriented SBT thin films could be deposited on Pt(111)/Ti/$SiO_2$$650^{\circ}C$). The c-axis preferred orientation of SBT film can be obtained by Sr deficiency and high compressive stress. However, the a-axis-oriented grains can be formed under stoichiometric Sr content and nearly stress-free state.

• Advances in nano research
• /
• 제1권2호
• /
• pp.93-103
• /
• 2013

An ultrasonic-mediated assisted stepwise method has been developed for depositing transparent ZnO films from aqueous solution. Rinsing in low ethylene glycol temperature was easy to produce intermediate phase of $Zn(OH)_2$, rinsing in $120^{\circ}C$ ethylene glycol was observed the diffraction peak of intermediate $Zn(OH)_2$ in early report, the rinsing temperature plays an important role in the process of $Zn(OH)_2$ phase transformed to ZnO, high rinsing temperature actually improved the intermediate phase. However, the effect of rinsing on the intermediate phase is yet to be understood clearly. The effect of different rinsing procedures, involving either of or a combination of successive ionic layer adsorption and reaction (SILAR) and ultrasonic-assisted rinsing, prior to hydrolysis in ethylene glycol was found to improve the occurrence $Zn(OH)_2$ in ZnO thin films. In the zinc complex ($[Zn(NH_3)_4]^{2+}$) solution, excess ($[Zn(NH_3)_4]^{2+}$) absorbed in glass substrate transformed incompletely to ZnO and exist as $Zn(OH)_2$ phase in thin films. In films deposited at low temperature, rinsing procedure is applied to improve excess $Zn(OH)_2$ and obtain smoother transparent thin films.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.27-32
• /
• 2017

The experimental design methodology was applied in the real scale coal-fired boiler to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was provided with the numerical simulation of the coal-fired boiler. The three independent variables, high heating value of coal (HHV), overall stoichiometry excess air ratio (OST), and burner-side stoichiometry excess air ratio (BST), were set to characterize the cross section averaged NOx concentration and temperature distribution. The maximum NOx concentration was predicted accurately and mainly controlled by BST in the boiler. The parabola function was assumed for the zone averaged peak temperature distribution, and the prediction was in a fairly good agreement with the experiments except downstream. Also, the location of the peak temperature was compared with that of maximum NOx, which implies that thermal NOx formation is the main mechanism in the coal-fired boiler. These results promise the wide use of statistical models for the fast prediction and safety assessment.

• 천문학회보
• /
• 제38권2호
• /
• pp.72.2-72.2
• /
• 2013

We present a UBVI and $H{\alpha}$ photometric study of the young open cluster NGC 1893 in the outer Galaxy as part of "Sejong Open cluster Survey (SOS)" project. Using the properties of early-type stars in the photometric diagrams 65 early-type members were selected. More than 120 $H{\alpha}$ emission stars and candidates were found by $H{\alpha}$ photometry. Together with the published young stellar object catalogue and X-ray source list for this cluster, a total of 837 pre-main sequence (PMS) stars were identified in our photometric data. We obtained the mean reddening of < E(B-V) > = $0.56{\pm}0.08$ mag from the (U-B, B-V) diagram and confirmed the normal reddening law ($R_V=3.1$) toward NGC 1893 based on color excess ratios from optical to mid-infrared wavelengths. The zero-age main sequence fitting to the reddening-corrected color-magnitude diagrams gives a distance modulus of $V_0-M_V=12.8{\pm}0.1$. The age of the cluster inferred from stellar evolution models is about 1-2 Myr. We also found the Salpeter/Kroupa type initial mass function for this cluster. Finally, the mass accretion rate of 80 PMS stars with UV excess emission was estimated for the stars with masses from $0.6M_{\odot}$ to $5M_{\odot}$.

• 한국수소및신에너지학회논문집
• /
• 제4권1호
• /
• pp.31-39
• /
• 1993

In order to improve the hydrogen storage capacity and the activation property of the $MmNi_{4.5}Al_{0.5}$ alloy, the multiphase alloy system are prepared by adding the excess Zr in $MmNi_{4.5}Al_{0.5}$ alloy. It is estimated from the X-ray diffraction pattern and the energy dispersive X-ray analysis that the 2nd phases in $MmNi_{4.5}Al_{0.5}Zr_x$ alloys are $ZrNi_3$, ${\beta}$-Zr. Their morphology is also examined by the scanning electron microscope, and it shows the needle-like precipitation. As the Zr contents increase, the activation time and the plateau pressure decrease, sloping of the plateau pressure increase. Amount of the 2nd phases increase with Zr contents in $MmNi_44.5Al_{0.5}Zr_x$ alloys. The $MmNi_44.5Al_{0.5}Zr_{0.05}$ alloy, which shows the maximum storage capacity and the strong resistance to intrinsic degradation, is considered as a proper alloy for hydrogen storage.