• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1433-1437
• /
• 2010

The deep excavation work in Korean downtown is almost excuted near by existing structures and utility lines because of the diminution of available yard for construction. So, it was required more and more that the accurate control of displacement on the earth retaining system for minimizing the popular complaint and the damage from constructional accident. Automatic monitoring system is adopted in fracture zone for real time monitoring. In addition, Face mapping is carried out on the face of fracture zone according to excavation sequence. As the result of automatic monitoring system and face mapping, we was able to take the necessary reinforcement and changing excavation method within suitable time. This paper is informed about a stability case on the deep rock excavation site with fracture zone in urban area by automatic monitoring system.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.399-413
• /
• 2018

This paper addresses the issue of field measurement of excavation damage zone (EDZ) and its numerical simulation method considering both excavation unloading and blasting load effects. Firstly, a 2000 m-deep rock cavern in China is focused. A detailed analysis is conducted on the field measurement data regarding the mechanical response of rock masses subjected to excavation and blasting operation. The extent of EDZ is revealed 3.6 m-4.0 m, accounting for 28.6% of the cavern span, so it is significantly larger than rock caverns at conventional overburden depth. The rock mass mechanical response subjected to excavation and blasting is time-independent. Afterwards, based on findings of the field measurement data, a numerical evaluation method for EDZ determination considering both excavation unloading and blasting load effects is presented. The basic idea and general procedures are illustrated. It features a calibration operation of damage constant, which is defined in an elasto-plastic damage constitutive model, and a regression process of blasting load using field blasting vibration monitoring data. The numerical simulation results are basically consistent with the field measurement results. Further, some issues regarding the blasting loads, applicability of proposed numerical method, and some other factors are discussed. In conclusion, the field measurement data collected from the 2000 m-deep rock cavern and the corresponding findings will broaden the understanding of tunnel behavior subjected to excavation and blasting at great depth. Meanwhile, the presented numerical simulation method for EDZ determination considering both excavation unloading and blasting load effects can be used to evaluate rock caverns with similar characteristics.

• 터널과지하공간
• /
• 제18권5호
• /
• pp.328-337
• /
• 2008

굴착손상권의 특성 및 범위를 규명하는 것은 방사성 폐기물의 이동 및 확산의 위험을 최소화하는 지하공동의 기밀에 영향을 받는 방사성폐기물 처분사업에선 중요하다. 캐나다 AECL의 URL에선 터널기밀시험(TSX)이 수행되었고, 굴착손상권(EDZ)의 발달 가능성을 최소화하기 위하여 응력장을 고려하여 터널 형태 및 방향을 선택하였다. EDZ의 특성 및 범위는 방사상의 시추공내에서의 탄성파 속도와 투수율 측정을 통하여 파악되었다. 이 결과는 EDZ의 범위를 추정하는 본 연구의 모델링작업에 사용되었다. 이를 위하여 UDEC 코드내에 손상모델을 형성하고, 실내실험 물성에 맞추었다. 이 모델은 TSX 터널 주변의 균열 개시와 성장범위를 예측하는데 사용되었고, 해석결과는 실제 측정된 손상과 비교되었다. 수치모델내 손상권의 발달은 현장 측정결과의 잘 일치하는 것으로 나타났다.

• 화약ㆍ발파
• /
• 제24권1호
• /
• pp.1-8
• /
• 2006

최근 대부분의 석회석 광산은 환경문제 등으로 인하여 노천채광에서 지하채굴로 전환되었다. 그 결과 노천채광과 같은 생산성을 유지하기 위해 갱도가 대형화되고 있다. 이에 따라 갱도 및 광주의 규모 그리고 굴착방법 등에서 많은 문제가 발생하고 있다. 본 연구는 두 갱도의 동시 발파 혹은 단일갱도 내에서 좌운반갱도와 사갱을 동시 발파, 두 갱도를 다단 발파 그리고 각각의 갱도를 단독 발파하여 굴착했을 때의 발파진동을 계측하여 각각의 굴착방법에 따라 발파진동식을 산출하여 노모그램 분석과 암반손상권 분석을 실시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1409-1416
• /
• 2010

It is essential to predict a blasting-induced excavation damage zone (EDZ) beyond the proposed excavation line of a tunnel because the unwanted damage area requires extra support system for tunnel safety. Complicated blasting process which may hinder a proper characterization of the damage zone can be effectively represented by two loading mechanisms. The one is a dynamic impulsive load generating stress waves outwards immediately after detonation. The other is a gas pressure that remains for a relatively long time. Since the gas pressure reopens up the arrested cracks and continues to extend some cracks, it contributes to the final formation of EDZ induced by blasting. This paper presents the simple method to evaluate EDZ induced by gas pressure during blasting in rock. The EDZ is characterized by analyzing crack propagation from the blasthole. To do this, a model of the blasthole with a number of radial cracks of equal length in an infinite elastic plane is considered. In this model, the crack propagation is simulated by using three conditions, the crack propagation criterion, the mass conservation of the gas, and the adiabatic condition. As a result, the stress intensity factor of the crack generally decreases as crack propagates from the blasthole so that the length of the crack is determined. In addition, the effect of rock properties, initial number of cracks, and the adiabatic exponent are investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.105-112
• /
• 2001

The purpose of this study is to assess the stability of tunnel for a high speed railway crossing the fault zone. The area where the tunnel crossed the fault zone can be unstable during construction and operation. Geotechnical investigations have been conducted to determine an optimum excavation method by obtaining the material properties around the fault zone and to check the stability of the tunnel. For the numerical analysis, the FLAC, numerical analysis code based on finite difference method, was utilized to analyze the behavior of the fault at three points having typical ground conditions. Based on the results of numerical analysis, the combinations of compaction grouting and LW grouting were determined as suitable methods for pre-excavation Improvement of the ground surrounding the tunnel opening. In conclusion, the stability of the tunnel construction for the high speed railway within the fault zone may be obtained by adopting the optimum excavation method and the reinforcement method. The numerical analysis based on FLAC program contains errors caused by assumptions used in numerical analysis, therefore constant monitoring with respect to the change of ground condition and groundwater is highly recommended to minimize the numerical error and the possibility of damage to tunnel.

• 한국지반공학회논문집
• /
• 제32권12호
• /
• pp.5-13
• /
• 2016

본 연구에서는 대변형 해석기법 중 하나인 Coupled Eulerian-Lagrangian 해석기법을 적용하여 TBM 굴진으로 발생하는 굴착손상영역을 분석하였다. 실제 TBM 굴진과정을 모사하기 위해 quasi-static 조건을 고려하여 동적해석을 수행하였으며, 해석시간의 효율성과 정확도를 만족시키는 최적의 조건을 찾기 위해 mesh 및 TBM 굴진속도를 변수로 하여 case study를 수행하였다. 또한 암반 종류 및 터널 직경이 굴착손상영역에 미치는 영향을 확인하기 위해서 매개변수연구를 수행하였다. 수치해석 결과, TBM 굴착으로 인한 굴착손상영역은 대부분의 경우 0.4D 이내로 나타났으며, 터널직경이 커짐에 따라 굴착손상영역도 증가하는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.323-335
• /
• 2021

This paper aims to estimate the range of the excavation damaged zone (EDZ) formation caused by the tunnel boring machine (TBM) advancement through dynamic three-dimensional large deformation finite element analysis. Large deformation analysis based on Coupled Eulerian-Lagrangian (CEL) analysis is used to accurately simulate the behavior during TBM excavation. The analysis model is verified based on numerous test results reported in the literature. The range of the formed EDZ will be suggested as a boundary under various conditions - different tunnel diameter, tunnel depth, and rock type. Moreover, evaluation of the integrity of the tunnel structure during excavation has been carried out. Based on the numerical results, the apparent boundary of the EDZ is shown to within the range of 0.7D (D: tunnel diameter) around the excavation surface. Through series of numerical computation, it is clear that for the rock of with higher rock mass rating (RMR) grade (close to 1st grade), the EDZ around the tunnel tends to increase. The size of the EDZ is found to be direct proportional to the tunnel diameter, whereas the depth of the tunnel is inversely proportional to the magnitude of the EDZ. However, the relationship between the formation of the EDZ and the stability of the tunnel was not found to be consistent. In case where the TBM excavation is carried out in hard rock or rock under high confinement (excavation under greater depth), large range of the EDZ may be formed, but less strain occurs along the excavation surface during excavation and is found to be more stable.

• 터널과지하공간
• /
• 제19권4호
• /
• pp.366-372
• /
• 2009

최근, 암반발파에서 평활한 파단면과 굴착손상영역을 제어하기 위한 목적으로 전자지발뇌관 및 노치장약공 등을 이용한 제어발파기술들이 개발되어 오고 있다. 본 연구에서는 날개형 노치 장약공을 이용한 SB발파에서 암반 내 파괴과정을 모사하여 파단면과 암반손상제어에 미치는 영향인자에 대하여 고찰하였다. 최종적으로 장약공 노치의 파단면 제어효과에 관한 수치해석적 고찰을 날개형 노치장약공과 전자뇌관을 이용한 새로운 SB발파법으로, ED-Notch SB발파법(Elerectronic Detonator Notched Charge Hole Smooth Blasting Method)을 제안하였다.

• 한국터널지하공간학회 논문집
• /
• 제26권1호
• /
• pp.1-17
• /
• 2024

터널 굴착으로 인한 지반의 거동 분석은 대변형 영역의 거동을 고려해야 한다. 따라서 본 논문에서는 TBM 터널 굴착으로 인한 주변 지반에 대한 영향을 실제 현장 조건과 동일 조건에서 분석하기 위하여 대변형 유한요소 해석을 수행하였다. 지반의 대변형 거동을 모사하고 예측함에 있어 가장 널리 활용되는 두 가지 해석 기법 - coupled Eulerian Lagrangian (CEL)과 auto-remeshing (AR) 기법 - 을 적용하여 TBM 굴착 과정을 모사하였고 그에 따른 주변 지반에 발생하는 손상영역의 범위를 예측하였다. 굴착손상영역의 범위는 두 기법을 통해 도출된 결과와 굴착손상영역을 정의하는 실험적인 기준을 종합하여 추정하였다. 해석 결과, 두 대변형 해석 기법을 이용하여 도출된 굴착손상영역은 서로 비슷한 크기로 수렴하였고, 기존 연구의 실험 및 계측을 통해 확인된 굴착손상영역 크기와 모양, 경향과도 일치하는 것으로 나타났다. 굴착 되는 지반의 RMR 등급이 좋을수록 굴착손상영역의 크기는 더 커지고, 터널의 직경과는 정비례하는 것으로 나타났다. 반면에, 터널의 심도가 깊을수록 지반의 구속압이 커져서 굴착손상영역은 상대적으로 작게 형성되는 것으로 확인되었다.