• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• Journal of Navigation and Port Research
• /
• v.45 no.5
• /
• pp.231-237
• /
• 2021

Enhancing the performance of maritime wireless communication has been highlighted by the issue of cell planning in the sea area because of lack of an appropriate Propagation Loss Model (PLM). To resolve the cell planning issue in vast sea areas, it was essential to develop the (PLM) matching the intended sea area. However, there were considerable gaps between the prediction of legacy PLMs and field measurement in propagation loss and there was a need to develop the adjusted PLM (A-PLM). Therefore, cell planning was performed on this adjusted model, including modification of the base station's location, altitude, and antenna azimuth to meet the quality objectives. Furthermore, in order to verify the availability of the cell planning, Communication Service Quality Monitoring System (CS-QMS) was developed in the LTE-Maritime project to collect LTE signal quality information from the onboard equipment at regular intervals and to ensure that the service quality was high enough to satisfy the goals in each designated grid. As a result of verification, the success rate of RSRP was 95.7% for the intensive management zone (IMZ) and 96.4% for the interested zone (IZ), respectively.

• Journal of Science Education
• /
• v.39 no.3
• /
• pp.343-357
• /
• 2015

The present study aims to analyze the extent of the use of STS contents in the areas of 'Evolution of Life' and 'Health of Humanity and Scientific Technology' in 'Science' textbooks and to determine whether they meet the goals of the curriculum revised in 2009. The analysis of the 7 types of textbooks according to the STS topics areas indicated big differences between textbooks as little as 16.67% and as much as 58.33%. Also, among the topics associated with STS, 'Space Development and National Defense' and 'Environmental Problems' were not included. In the STS activity areas, the areas of 'Structured Debate,' 'Interpretation of Data,' 'Research and Investigation' showed great frequency. On the other hand, the STS activity areas of 'Field Activities,' 'Problem-solving and Decision-making,' 'Role Playing,' 'Simulation,' 'Case Study,' and 'Research Design' showed small frequency. Analysis of the STS contents for each area indicated 67.57% for the contents relevant to 'the applicability of science' accounting for the largest part whereas 'Understanding of Occupations related to Science' accounted for 1.63%, showing a great difference in their frequency. Seven standards except 'the applicability of science' were included each contents beyond 10% or less than 10% proportion. The STS contents included in the life science area of the 7 types of convergence-style 'Science' textbooks for the high-school accounted for an average of 20.75%, from as little as 12.35% to as much as 26.90%, depending on the publishes.

• Journal of the Korean Geographical Society
• /
• v.46 no.6
• /
• pp.673-692
• /
• 2011

Advances in computer technology have enabled us to develop and use numerical landscape evolution models (NLEMs) for exploring the dynamics of geomorphic system from a variety of viewpoints which previously could have not been taken. However, as of yet there have been no trials using or developing NLEMs in Korea. The purpose of this research is to develop a 2 dimensional NLEM on a geological time scale and evaluate its usefulness. The newly developed NLEM (ND-NLEM) treats bedrock weathering as one of the major geomorphic processes and attempts to simulate the thickness of soil. As such it is possible to model the weathering-limited as well as the transport-limited environment on hillslopes. Moreover the ND-NLEM includes not only slow and continuous mass transport like soil creep, but also rapid and discrete mass transport like landslides. Bedrock incision is simulated in the ND-NLEM where fluvial transport capacity is large enough to move all channel bed loads, such that ND-NLEM can model the detachment-limited environment. Furthermore the ND-NLEM adopts the D-infinity algorithm when routing flows in the model domain, so it reduces distortion due to the use of the steepest descent slope flow direction algorithm. In the experiments to evaluate the usefulness of the ND-NLEM, characteristics of the channel network observed from the model results were similar to those of the case study area for comparison, and the hypsometry curve log during the experiment showed rational evidence of landscape evolution. Therefore, the ND-NLEM is shown to be useful for simulating landscape evolution on a geological time scale.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1067.1-1067.4
• /
• 2000

During the last three decades power electronics has gone through energetic technical evolution. The technical needs from wide area such as in industrial, commercial, consumer, aerospace and environmental applications have driven the environment favorably for the power electronics. In the future, two extreme technology-expansion trends are expected: one into low power, and the other into very high power. The former is based on the high frequency and the circuit miniature using VLSI circuit and surface mounting aiming for the system-on-chip (SOC) technology. The latter includes the application areas of power utility such as HVDC, FACTS and SVC and large science area of electrophsycal apparatus such as thermonuclear fusion, acclerators, and electric guns. This paper describes the technology status of some major elements which are available today and the key roles of the power electronics from view points of applications. The author would like to take this opportunity to raise discussions about the future technology development trend of power electronics in our country with the fellow power electronics engineers.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.4
• /
• pp.420-423
• /
• 2020

As a result of continuous taxonomic studies on the Korean crabs, Carcinus aestuarii Nardo, 1847 belonging to the superfamily Portunoidea is newly reported from Korean waters. Carcinus aestuarii has characteristics as followings: cardiac, hepartic and brachial regions are divided by deep furrow; shape of three lobes in frontal area is flatter with hairy; inside of carpus is with one sharp tooth; the posterior-lateral margin of the carapace is concave, and so on. The examined specimen doesn't have hairy and bump on outer margin of the chelipeds which differed from the previous description of the specimens collected from Tokyo Bay, Japan. Here, the diagnosis and the picture of Korean specimen is provided. Korean portunoids currently consist of 20 species belonging to 10 genera.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.326-333
• /
• 2015

A tidal sandshoal, called 'Puldeung' in the Daeijackdo Marine Protected Area(DMPA), is facing erosion due to sand mining in the nearby coastal region. To monitor the morphologic change and erosion of Puldeung, a camera monitoring system was established at the top of Song-Ee Mountain in Daeijack Island. The system consists of 2 Cannon digital cameras, Eye-fi memory card/Long-Term Evolution wireless network, and solar power supply. The acquired camera images were analyzed to obtain the area of Puldeung by the following methods: geometric correction of image, identification of shoreline, areal measurement of Puldeung and its error estimation. To compare the Puldeung area with previously measured area of 1.79 km2 at tidal height of 137 cm in 2008 and of 1.59 km2 at tidal height of 148 cm in 2010, we selected images with same tidal heights. The Puldeung area was 1.37 and 1.23 km2 at the tidal height of 137 and 148 cm, respectively. The erosion at DMPA is very severe and thus it is imperative to initiate the morphodynamical study on the seasonal variation and long-term evolution of Puldeung as well as the causes and measures of Puldeung erosion.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.222-229
• /
• 2010

A conventional pseudorandom sequence generator creates only 1 bit of data per clock cycle. Therefore, it may cause a delay in data communications. In this paper, we propose an efficient implementation method for a pseudorandom sequence generator with parallel outputs. By virtue of the simple matrix multiplications, we derive a well-organized recursive formula and realize a pseudorandom sequence generator with multiple outputs. Experimental results show that, although the total area of the proposed scheme is 3% to 13% larger than that of the existing scheme, our parallel architecture improves the throughput by 2, 4, and 6 times compared with the existing scheme based on a single output. In addition, we apply our approach to a $2{\times}2$ multiple input/multiple output (MIMO) detector targeting the 3rd Generation Partnership Project Long Term Evolution (3GPP LTE) system. Therefore, the throughput of the MIMO detector is significantly enhanced by parallel processing of data communications.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.690-693
• /
• 2015

Fatigue crack growth experiments were carried out on a 304 L stainless steel compact-tension(CT) specimen under load control mode. Neutron diffraction was employed to quantitatively measure the residual strains/stresses and the evolution of stress fields in the vicinity of a propagating fatigue-crack tip. Three principal stress components (i.e. crack growth, crack opening, and through-thickness direction stresses) were examined in-situ under loading as a function of distance from the crack tip along the crack-propagation path. The stress/strain fields, measured both at the mid-thickness and near the surface of the CT specimen, were compared. The results show that much higher compressive residual stress fields developed in front of the crack tip near the surface than developed at the mid-thickness area. The change of the stresses ahead of the crack tip under loading is more significant at the mid-thickness area than it is near the surface.

• Culinary science and hospitality research
• /
• v.9 no.1
• /
• pp.101-120
• /
• 2003

The today society comes wind important position we and the economic room gets and our dietary life simple ´it eats,´ is not only the act which is primary work, ´it enjoys,´, ´appreciates´with culture dimension to execute, becoming, it fellowed hereupon and with the aesthetics idea which pursues the quality of change and life of our dietary life there is to a culture and the repast tool which is an essential width enjoyed from meaning as the jar tool and with meaning as the object and it will be able to appreciate it developed it came. The research which it sees the repast fool of the Orient and the West it is appropriate from dietary life and it uses to respect with It observes the understanding of the chopsticks and the cutlery. With the repast tool development and evolution or it undergoes the process of change and comparison analyzes becomes the all chopsticks and the cutlery with each other and the understanding for the culture collision and a culture harmony of the heterogeneous element which bisection is objective of research.