• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.3
• /
• pp.49-57
• /
• 2018

Purpose: The increase in patients requiring hemodialysis has resulted in an increase dialysis-associated infections risk. but there are no Renal Dialysis unit design standard meet specified safety and quality standards. Therefore, appropriate Establish standards and legal regulation is important for the provision of initial certification and maintenance of facility, equipment, and human resource quality. Methods: Literature survey on the design guideline and standards of Renal Dialysis unit design in Korea, U.S, Germany, Singapore, Hongkong, Dubai. Results: There are no established standards for facilities in dialysis units in Korea. To prevent infections in dialysis patients, necessary establish standards. Considering the domestic and overseas Health-care facilities standards, the major factors to be considered in the medical environment for Renal Dialysis Unit are as follows. First, planning to separate Clean areas(treatment area) from contaminated areas(medical waste storage area). Second, ensure sufficient space and minimum separation distance. Although there may be differences depending on the circumstances of individual institutions, renal dialysis unit consider the space to prevent droplet transmission. Third, secure infrastructure of infection prevention such as sufficient amount of hand hygiene sinks. Hand washing facilities for staff within the Unit should be readily available. Hand hygiene sinks should be located to prevent water from splashing into the treatment area. Fourth, Heating, ventilation and air conditioning (HVAC) system for Renal Dialysis Unit is all about providing a safer environment for patients and staff. Implications: The results of this paper can be the basic data for the design of the Renal Dialysis Units and relevant regulations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• The Journal of Korean Medicine
• /
• v.38 no.3
• /
• pp.73-85
• /
• 2017

Objectives: The purpose of this study was to investigate the status of Korean medicine treatment, and to analyze problems and demands to provide basic data on Korean medicine in military medical services. Methods: This survey was completed by 30 volunteer Korean medicine military doctors on service via a web-based questionnaire system. The questionnaire was developed through in-depth interviews with Korean medicine military doctors and consisted of general information on the subject, overall characteristics of the medical environment, current status of Korean medicine care in each workplace, problems and needs, and related clinical evidence and education. Results: Korean medicine military doctors administered acupuncture treatment most frequently in clinical practice. The most common complaints were related to musculoskeletal diseases, which accounted for 86.5% of all diseases, including those of the respiratory, digestive, and nervous systems. Most of the problems in Korean medicine care were pointed out as being due to a lack of awareness of Korean medicine in the military. Many doctors were aware that it is necessary to establish clinical evidence for Korean medicine in the military, and were also positive about the possibility of performing clinical research in the military, but the experience of actual participation in clinical research or related education was uncommon. Conclusions: Korean medicine military treatment differs from private medical care due to the specificity of each workplace and the military medical system. In the future, it will be necessary to establish an appropriate Korean medicine treatment model in the military suitable for these characteristics and strategic plans for clinical evidence.

• Journal of Korean Academy of Nursing
• /
• v.34 no.6
• /
• pp.1025-1034
• /
• 2004

Purpose: This study defines a vulnerable group in a community that has become the main target of a national health project also, it is descriptive research to suggest an evidence-based direction to meet their deficit health-related needs, Method: This research examined 833 families and 1,835 family members of the financially vulnerable class that was registered in a home visiting program of a public health center. Among them, 892 persons who had health problems, and their family members were examined in detail to find out their characteristics of vulnerability and health needs by assessment during a nurses home visit. Frequency distribution, stepwise-regression and factor analysis were used to analyze the data. Result: The vulnerable group that was defined with social indexes set as standards, involved substantial characteristics of vulnerability. The characteristics of demand showed tendencies of being clustered in 5 factors needs of intensive nursing care, chronic nursing care problems and helplessness, maintenance of family functioning with a disability, deficient problem solving ability, and simple financial fragility. Conclusion: Categorization of needs is an evidence-based estimator of workload in nurse home visiting services, and can be used as a basic resource for direction to meet the deficit needs of a vulnerable group.

• Archives of Plastic Surgery
• /
• v.44 no.5
• /
• pp.457-468
• /
• 2017

Background Abdominoplasty, with or without liposuction, is among the most frequently performed aesthetic procedures. Its main objective is to improve the body contour by means of excising redundant skin and fat tissue. Although abdominoplasty is considered a safe procedure with high satisfaction rates, intraoperative and postoperative complications can become a challenge for the surgical team. The aim of this article is to offer a synopsis of the most common complications arising after abdominoplasty, along with evidence-based guidelines about how to prevent and treat them. Methods A systematic MEDLINE search strategy was designed using appropriate Medical Subject Headings (MeSH) terms, and references were scanned for further relevant articles. Results According to the published case series, local complications are considerably more common than complications with systemic repercussions. Approximately 10% to 20% of patients suffer a local complication following abdominoplasty, while fewer than 1% suffer a systemic complication. Prevention and management strategies are critically discussed for complications including seroma, haematoma, infection, skin necrosis, suture extrusions, hypertrophic scars, neurological symptoms, umbilical anomalies, deep venous thrombosis and pulmonary thromboembolism, respiratory distress, and death. Conclusions The complications of abdominoplasty vary in severity and in the impact they have on the aesthetic outcomes. Recommendations for prevention and management are based on various levels of evidence, with a risk of observer bias. However, most complications can be treated appropriately following the current standards, with satisfactory results.

• The Journal of Korean Physical Therapy
• /
• v.31 no.4
• /
• pp.161-168
• /
• 2019

Most athletes with anterior cruciate ligament (ACL) ruptures undergo a surgical ACL reconstruction (ACLR) and rehabilitation. On the other hand, controversy still exists because neither a reconstruction nor rehabilitation have been proven to be superior in the management of ACL injury. This study reviewed the success rates of interventions to provide recommendations for the optimal management after an ACL injury. One of the most important considerations after an ACL injury is the timing and type of intervention. At the early stages, which involve the loss of volume and strength of quadriceps femoral muscle, weight bearing (closed kinetic chain) exercises with pain management followed by high velocity resistance exercises in an open kinetic chain environment are recommended to improve the quadriceps function. After that, it is important to apply intensive isokinetic exercise with a lower extension rate. In this case, it is important to apply overload to the muscles and to simultaneously lead the co-contraction of the hamstrings. Standards are essential because the timing and type of interventions are crucial to prevent re-injury and complications, such as osteoarthritis, as well as to confirm the successful outcome of the treatment. Different interventions recommended for ACL damage have yet to reach consensus. Further studies will be needed to observe the effects of the intervention through multidisciplinary approaches.

• International Journal of Advanced Culture Technology
• /
• v.10 no.2
• /
• pp.130-134
• /
• 2022

The purpose of this study is to examine the academic foundation of developmental rehabilitation, and the main context and criteria of the review were based on lifelong education for individuals with disabilities. As for the research method, expert consultation was formed based on literature analysis. The contents of the study presented structuring career roadmaps for individuals with developmental disabilities, establishing subject-extracurricular standards for lifelong education curriculum, adult-centered teaching and learning evidence-based practices, job majors, and data-based ILEP document certification. As a result of the study, developmental rehabilitation was valuable as an academic basis for establishing a major foundation for lifelong education for individuals with disabilities, and could be understood as a field deeply applied by convergent nature through special education, rehabilitation science, and social welfare.

• International Journal of Stem Cells
• /
• v.17 no.2
• /
• pp.102-112
• /
• 2024

An organoid is a self-organized three-dimensional structure derived from stem cells that mimics the structure, cell composition, and functional characteristics of specific organs and tissues and is used for evaluating the safety and effectiveness of drugs and the toxicity of industrial chemicals. Organoid technology is a new methodology that could replace testing on animals testing and accelerate development of precision and regenerative medicine. However, large variations in production can occur between laboratories with low reproducibility of the production process and no internationally agreed standards for quality evaluation factors at endpoints. To overcome these barriers that hinder the regulatory acceptance and commercialization of organoids, Korea established the Organoid Standards Initiative in September 2023 with various stakeholders, including industry, academia, regulatory agencies, and standard development experts, through public and private partnerships. This developed general guidelines for organoid manufacturing and quality evaluation and for quality evaluation guidelines for organoid-specific manufacturing for the liver, intestines, and heart through extensive evidence analysis and consensus among experts. This report is based on the common standard guideline v1.0, which is a general organoid manufacturing and quality evaluation to promote the practical use of organoids. This guideline does not focus on specific organoids or specific contexts of use but provides guidance to organoid makers and users on materials, procedures, and essential quality assessment methods at end points that are essential for organoid production applicable at the current technology level.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.7 no.1
• /
• pp.39-55
• /
• 2008

The purpose of this study is to suggest improvement of certification standards of environment friendly architecture in ecological environment field by surveying and analyzing actual status of actual certification schools of environment friendly architecture per ecological environment elements through extracting ecological environment elements which is possible to analyze in quantity certification standards of environment friendly architecture. As contents of the study, first, certification as an examination on certification system of environment friendly architecture, summary of certification system of environment friendly architecture, ecological environment elements which is possible for quantitative analysis of ecological environment certification standards were extracted. Second, actual status of ecological environment elements per school grade, region, and population increase by collecting actual data of certification schools of environment friendly architecture. Third, using analysis data of ecological environment elements, ecological area ratio of certification schools of environment friendly architecture per weighted values of space types was calculated and the results were analyzed as the follows. (1) In case of preliminary certification out of total objects of investigation schools was average 34.06% but in this case of certification, it was reduced to 33.07%. However, it is difficult to make judgment as actual evidence data since ecological area ratio of actual preliminary certification is data based on drawing planes. Therefore, in case of this certification, elementary schools was investigated at average 33.11%, middle schools 34.81%, and high schools 31.28% and middle school showed the highest relatively. (2) Besides, average composition ratio of ecological area ratio was 63.04% in case of this certification regardless of school grade and region and it was analyzed that about 70% of ecological area ratio is composed of the natural based green area including pure natural based green land and 6.89% of ecological learning institute.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.485-496
• /
• 2022

Modular construction projects offer advantageous over conventional construction projects in the area of quality control through factory production. However, as clear standards and definitions for quality control activities have yet to be not established, it is difficult to judge the appropriateness of the scale of quality control costs, and it is also difficult to classify quality control activities by process stage. Therefore, in this study, a method for classifying quality management activities based on activity standards was presented, in addition to a method for classifying quality costs according to the PAF standards to check how effective the costs and activities are for quality control in the future. The findings of this study can be used to define the quality management activities for each stage of the modular construction project in the future, and to develop a database of evidence to determine the appropriateness of cost distribution accordingly.