• 한국운동역학회지
• /
• 제13권2호
• /
• pp.89-100
• /
• 2003

In this research was to analyze 3-D kinematics variables for handspring of basic motion in the heavy gymnastics in order to investigate kinematical difference between expert and novice. Therefore, the purpose of this research was provide quantitative information, systematic provision, rules, establishment of basic skill for improving skill and teaching athletes. And in the research, results were as followings. 1. In the time variables, total time was that expert took 0.745sec and novice took 0.829sec, and as duration time of each event, expert was faster than novice in the all motion event except till second event of the preparation motion. 2. In the center of body variables, vertical direction variables, the displacement of body center hight was that expert showed 61.26% and novice showed 54.48% in the third event of all motion, also all event were showed expert was higher displacement than novice except first of event in preparatory stage. 3. In the angle displacement of main joint, the right direction was that expert showed 154.12degree and novice showed 174.85degree and the left direction was that expert showed 159.29degree and novice showed 171.46degree In the second event of main joint curved point at the same time hand was reached floor. In the angle displacement of knee joint in the third event of all motion, expert showed 155.25degree and novice showed 154.00degree In right, and expert showed 155.24degree and novice showed 154.55degree in left. In this result, both were same motion type. In the angle displacement of hip joint in the third event of the all motion, expert showed 142.80degree and novice showed 134.17degree in right, and expert showed 140.28degree and novice showed 144.94degree in left. In this result, motion pattern of expert was same both sides, but novice was different. According to the results, to increase efficiency of motion and aesthetic effect in the all motion, it should stretch displacement and height of body center and make similarly angle of right and left joint.

• 원예과학기술지
• /
• 제29권2호
• /
• pp.123-129
• /
• 2011

To identify unintended vertical gene-transfer rates from the developed transgenic plants, rapid and unequivocal techniques are needed to identify event-specific markers based on flanking sequences around the transgene and to distinguish zygosity such as homo- and hetero-zygosity. To facilitate evaluation of zygosity, a polymerase chain reaction technique was used to analyze a transgenic pepper line B20 (homozygote), P915 wild type (null zygote), and their F1 hybrids, which were used as transgene contaminated plants. First, we sequenced the 3'-flanking region of the T-DNA (1,277 bp) in the transgenic pepper event B20. Based on sequence information for the 3'- and 5'-flanking region of T-DNA provided in a previous study, a primer pair was designed to amplify full length T-DNA in B20. We successfully amplified the full length T-DNA containing 986 bp from the flanking regions of B20. In addition, a 1,040 bp PCR product, which was where the T-DNA was inserted, was amplified from P915. Finally, both full length T-DNA and the 1,040 bp fragment were simultaneously amplified in the F1 hybrids; P915 ${\times}$ B20, Pungchon ${\times}$ B20, Gumtap ${\times}$ B20. In the present study, we were able to identify zygosity among homozygous transgenic event B20, its wild type P915, and hemizygous F1 hybrids. Therefore, this novel zygosity identification technique, which is based on PCR, can be effectively used to examine gene flow for transgenic pepper event B20.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.52-60
• /
• 2020

Usage of EDR(Event Data Recorder) report for traffic accident analysis is currently increasing due to government regulation of EDR data release. Nevertheless, a lot of investigators simply adopt by comparing the number of ignition cycles(crash) at event to the number of ignition cycles(download) without an exact judgment whether event data occurred by this accident or not. In the EDR report, besides ignition cycles, there are many factors such as event record type, algorithm active(rear/rollover/side/frontal), time between events, event severity status(rollover/rear/right side/reft side/frontal), belt switch circuit status, driver/passenger pretensioner/air-bag deployment, PDOF(Principal Direction of Force) by ΔV to be able to decide whether or not to adopt. also the event data is considered enough to vehicle damaged state, accident situation at the scene of the accident. and there is described in "all data should be examined in conjunction with other available physical evidence from the vehicle and scene" in the CDR(Crash Data Retrieval) report. Therefore many investigators have to decide whether or not to adopt after they consider sufficiently to above factors when they are the traffic accident analysis and investigate the causes of a accident on the adopted event data. In this paper, we report to traffic accident investigators notable points and analysis methods on the basis of thousands of cases and the results of one's own experiment in NFS(National Forensic Service).

• KIEAE Journal
• /
• 제15권5호
• /
• pp.5-12
• /
• 2015

Purpose: Retention and infiltration of small and frequently-occurring rainfall by LID facilities account for a large proportion of the annual precipitation volume. Based on 4 standard facilities such as Porous Pavement, Infiltration Trench, Cylindrical Infiltration Well, Rectangular Infiltration Well by Seoul Metropolitan Handbook of the Prior Consultation for LID. The total retention volume of each facility was calculated according to the type and size. The Purpose of this study is to find out the quantitative relationship between Percentile Rainfall Event and Design Volume of Infiltration Facilities. Methode: For the estimation of Percentile Rainfall Event, Daily Precipitation of Seoul from 2005 to 2014 was sorted ascending and the distribution of percentile was estimated by PERCENTILE spreadsheet function. The managed Rainfall Depth and Percentile of each facility was calculated at the several sizes. In response to the rainwater charge volume of 5.5mm/hr by the Category "Private large site", the 3 types of facilities were planned for example. The calculated Rainfall Depth and Percentile were 54.4mm and 90% by the use of developed Calculation-Module based on the Spreadsheet program. Result: With this Module the existing Designed Infiltration volume which was introduced from Japan was simply converted to the Percentile-Rainfall-Event used in USA.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1165-1171
• /
• 2017

The traditional form of parallelism in Monte Carlo particle transport simulations, wherein each individual particle history is considered a unit of work, does not lend itself well to data-level parallelism. Event-based algorithms, which were originally used for simulations on vector processors, may offer a path toward better utilizing data-level parallelism in modern computer architectures. In this study, a simple model is developed for estimating the efficiency of the event-based particle transport algorithm under two sets of assumptions. Data collected from simulations of four reactor problems using OpenMC was then used in conjunction with the models to calculate the speedup due to vectorization as a function of the size of the particle bank and the vector width. When each event type is assumed to have constant execution time, the achievable speedup is directly related to the particle bank size. We observed that the bank size generally needs to be at least 20 times greater than vector size to achieve vector efficiency greater than 90%. When the execution times for events are allowed to vary, the vector speedup is also limited by differences in the execution time for events being carried out in a single event-iteration.

• 융합보안논문지
• /
• 제18권5_1호
• /
• pp.33-43
• /
• 2018

본 논문에서는 사용자들이 탐색하고 싶은 공격의 진행경과, 공격의 연속성, 공격과 피해간의 연관관계, 차단 우선순위와 방어 대책 등의 문제들을 멀티 회전축과 방사축 구조를 갖는 시각화 인터페이스를 이용하여 해결하고자 한다. 이벤트의 발생 순서, 이벤트의 주체, 이벤트의 종류로 구조화된 멀티 회전축과 개별 이벤트 주체들의 진행경과를 나타내는 객관적 시간인 방사축을 기반으로 시계열 이벤트를 배치함으로써 보안이벤트를 효과적으로 감시 및 추적할 수 있게 한다. 제안하는 시각화 인터페이스는 전체 공격의 추이와 진행상황, 개별 공격들의 세부 내용과 연속성, 공격자와 피해자간의 연관관계 등을 종합적으로 제공하여 공격 차단 및 방어 대책이 적용가능한 실용적인 시각화 인터페이스이다.

• Asia Marketing Journal
• /
• 제16권1호
• /
• pp.21-33
• /
• 2014

When the negative event is published, the company tends to go through the negative impact on the firm performance. Especially, with the SNS, the negative event is instantly spread on indefinite region so the impact seems bigger than the period before the SNS media appearance. It seems that everyone considers the SNS media impact on the firm performance quite big. However, there has been no empirical study on the impact comparison on the firm performance between pre and post SNS media occurrence periods. This study tries to empirically compare the impact of the negative event on the firm performance between pre and post SNS media appearance. Our study starts fromthe basic but not verified question; Does really the negative event have more negative impact in the post-SNS-occurrence period than in the pre-SNS-occurrence period? In order to examine the impact of the negative publicity on firm performance in two eras, pre and post SNS media appearance, we used CAR (Cumulative Abnormal Resturns) model. By using this model, we could verify the statistical significance of cumulative abnormal returns in market between before and after the events. For event samples, we focused on food manufacturers and collected the negative events from 1991 to 2003 for pre-SNS occurrence period, and from 2010 to 2013 for post-SNS occurrence period. Based on the listed food companies at KOSPI, we researched Naver News Library (newslibrary.naver.com) and Naver News (news.naver.com) for all the individual negative events published for both periods. Firm returns data were collected from TS 2000 (KOCO Info) and market portfolio data were collected from KRX Exchange. Through our empirical analysis, our finding is interesting to note that the type of events differently influences on the firm performance. With the SNS, the health-related events have influence on the firm performance 'after the event day' whereas the company behavior trust events have influence 'before the event day'. Our findings have implications for management. When a negative event directly related to or threatening customers or their life such as health, it is crucial to fix up the situation right after the event occurs. On the other hand, when a negative event is not publicly available information such as company behavior trust, it is important for marketers to strengthen the firms' trust reputation and control the bad WOM before the event.

• 산업공학
• /
• 제20권3호
• /
• pp.288-297
• /
• 2007

Success of semiconductor/LCD industry depends on its yield and quality of product. For the purpose, FDC (Fault Detection and Classification) system is used to diagnose fault state in main manufacturing processes by monitoring time series data collected by equipment sensors which represent various conditions of the equipment. The data set is segmented at the start and end of each product lot processing by a trigger event module. However, in practice, segmented sensor data usually have the features of data asynchronization such as different start points, end points, and data lengths. Due to the asynchronization problem, false alarm (type I error) and missed alarm (type II error) occur frequently. In this paper, we propose a robust process fault detection system by integrating a process event detection method and a similarity measuring method based on dynamic time warping algorithm. An experiment shows that the proposed system is able to recognize abnormal condition correctly under the asynchronous data situation.

• Journal of Astronomy and Space Sciences
• /
• 제33권3호
• /
• pp.197-205
• /
• 2016

We investigated two flares in the solar atmosphere that occurred on June 3, 2012 and July 6, 2012 and caused propagation of Moreton and EIT waves. In the June 3 event, we noticed a filament winking which presumably was caused by the wave propagation from the flare. An interesting feature of this event is that there was a reflection of this wave by a coronal hole located alongside the wave propagation, but not all of this wave was transmitted by the coronal hole. Using the running difference method, we calculated the speed of Moreton and EIT waves and we found values of 926 km/s before the reflection and 276 km/s after the reflection (Moreton wave) and 1,127 km/s before the reflection and 46 km/s after the reflection (EIT wave). In the July 6 event, this phenomenon was accompanied by type II and type III solar radio bursts, and we also performed a running difference analysis to find the speed of the Moreton wave, obtaining a value of 988 km/s. The speed derived from the analysis of the solar radio burst was 1,200 km/s, and we assume that this difference was caused by the different nature of the motions in these phenomena, where the solar radio burst was caused by the propagating particles, not waves.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.233-238
• /
• 2007

An approach to identify Chinese event types is proposed in this paper which combines a good feature selection policy and a Maximum Entropy (ME) model. The approach not only effectively alleviates the problem that classifier performs poorly on the small and difficult types, but improve overall performance. Experiments on the ACE2005 corpus show that performance is satisfying with the 83.5% macro - average F measure. The main characters and ideas of the approach are: (1) Optimal feature set is built for each type according to local feature selection, which fully ensures the performance of each type. (2) Positive and negative features are explicitly discriminated and combined by using one - sided metrics, which makes use of both features' advantages. (3) Wrapper methods are used to search new features and evaluate the various feature subsets to obtain the optimal feature subset.