• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.38-45
• /
• 2007

A one-dimensional kinematic wave model was used to calculate temporal and spatial changes of the highway runoff. Infiltration into pavement was considered using Darcy's law, as a function of flow depth and pavement hydraulic conductivity ($K_p$). The model equation was calculated using the method of characteristics (MOC), which provided stable solutions for the model equation. 22 storm events monitored in a highway runoff monitoring site in west Los Angeles in the U.S. were used for the model calculation and evaluation. Using three different values of $K_p$ ($5{\times}10^{-6}$, $10^{-5}$, and $2{\times}10^{-5}cm/sec$), total runoff volume and peak flow rate were calculated and then compared with the measured data for each storm event. According to the calculation results, $10^{-5}cm/sec$ was considered a site representative value of $K_p$. The study suggested a one-dimensional method to predict hydrodynamic behavior of highway runoff, which is required for the water quality prediction.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.29-32
• /
• 2011

센서 네트워크는 원격지의 상태를 실시간으로 파악하기 위하여 각종 모니터링 시스템에서 활발히 활용된다. 시스템은 원격지에 일어난 사건을 인식하고 사용자에게 유용한 정보를 제공하기 위하여 각종 시뮬레이션 모델 및 분석 기법과 함께 수집된 센서 데이터를 분석한다. 이 논문에서는 모니터링 시스템에서 원격지의 사건을 인식하기 위하여 사건을 등록하고 처리하는 과정을 설계하였다. 이 과정에는 사건 정보 등록, 센서 데이터로부터 사건 정보 추출, 데이터 종류 별 테마(theme) 생성, 연산자를 통한 테마 결합, 시뮬레이션 모델을 활용한 사건 진행 예측, 영향 분석이 포함된다. 그리고, 실제 센서 네트워크를 활용하여 등록된 사건이 처리됨을 보인다.

• Korean Journal of Clinical Pharmacy
• /
• v.28 no.2
• /
• pp.154-157
• /
• 2018

Levosulpiride is one of the most frequently prescribed medicines in Korea. An adverse drug reaction (ADR) after taking levosulpiride was reported at a community pharmacy in Korea. A 31-year-old woman reported the symptoms of lactation and amenorrhea after taking levosulpiride; an evaluation of whether these symptoms were caused by the medication was therefore necessary. Several tools can be used to determine if the ADR resulted from the administered drug or other factors, including the World Health Organization-Uppsala Monitoring Centre (WHO-UMC) criteria, the Naranjo scale, and the Korean causality assessment algorithm (Ver. 2). The causality was evaluated as "possible" by the WHO-UMC and Naranjo scales, but as "probable" by the Korean causality assessment algorithm (Ver. 2). In conclusion, the information provided did not indicate definite causality and there were slight differences in the results obtained from each assessment method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.193-204
• /
• 2010

Since Wireless Multimedia Sensor Network(WMSN) needs to process various multimedia data such as audio, image and video data as well as scalar data, it requires a mechanism that can support Quality of Service(QoS) to handle efficiently. This paper classifies traffic in WMSN as periodic monitoring traffic, event traffic, multimedia traffic and query-based traffic, proposes marking algorithm and queue management mechanism that guarantee differentiated QoS in terms of delay, energy efficiency and credibility on each traffic and conduct performance analysis with simulation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.9-11
• /
• 2014

As Daecheon beach, which is the study area, has problem of erosion and loss of most beach under the extraordinary wave during the typhoon event, it is necessary to apply erosion control measures for short term impact. Therefore, we analyzed the status and reason of the erosion by field survey, collection of hydraulic model test, and numerical model experiment. For the erosion control measure, we adopted beach feeding and submerged reef method available at that site among various counter measures. Numerical analyses were made for both beach feeding only and beach feeding with submerged reefs and these were compared with the present status to find out the optimum design and to contribute for preparing a long term plan of beach loss protection.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1055-1061
• /
• 2004

In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.295-300
• /
• 1998

In this paper, a real time diagnostic algorithm fur estimating the impact location by loose parts is proposed. It is composed of two modules such as the alarm discrimination module (ADM) and the impact-location estimation module(IEM). ADM decides whether the detected signal that triggers the alarm is the impact signal by loose parts or the noise signal. When the decision from ADM is concluded as the impact signal, the beginning time of burst-type signal, which the impact signal has usually such a form in time domain, provides the necessary data fur IEM. IEM by use of the arrival time method estimates the impact location of loose parts. The overall results of the estimated impact location are displayed on a computer monitor by the graphical mode and numerical data composed of the impact point, and thereby a plant operator can recognize easily the status of the impact event. This algorithm can perform the diagnosis process automatically and hence the operator's burden and the possible operator's error due to lack of expert knowledge of impact signals can be reduced remarkably. In order to validate the application of this method, the test experiment with a mock-up (flat board and reactor) system is performed. The experimental results show the efficiency of this algorithm even under high level noise and potential application to Loose Part Monitoring System (LPMS) for improving diagnosis capability in nuclear power plants.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1109-1116
• /
• 2018

The purpose of this study is to solve the loss of personal belongings by utilizing monitoring function of IoT platform. The beacon to combined with personal belongings are registered with the application server, the trigger processing function according to the occurrence of the lost event is performed intelligently through the device, the app, the IoT network, and the application server.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1465-1466
• /
• 2006

The monitoring and diagnosing technique for lightning arresters is important to assure the reliability of power supply in GIS-substation. In this paper, we described the implementation of an expert system for GIS arrester facilities. The proposed system consists of a data acquisition module (DAM), a wireless communication module, and a personal computer. The DAM detects system voltages, total leakage currents and its harmonic components, and includes an algorithm to calculate the resistive leakage current by the principle that the magnitudes of resistive leakage current are equal at the same level of the system voltage applied to the arrestor. Also, we designed a surge event detection circuit which can acquire the date, the polarity, and the amplitude of surge events. All the acquired data are transmitted after correction by many algorithms to the remote station through the ZigBee protocol. The expert system is based on the Jave Expert System Shell (JESS) and make more reliable decision by using an exclusive inference process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.835-843
• /
• 2000

This paper presents a method to design the integrated system for supporting both multimedia contents creation and its presentation in a windows system. Especially, it describes techniques for designing an integrated editor that can be used to crate and edit various media data including continuous media such as audio and video. And it also proposes a system model for systematically integrating multimedia creation tool with multimedia presentation system where the buffering and scenario-based presentation methods are included in the propose system for supporting effective multimedia presentation through a network. Finally, we describe a threads processing technique based on event monitoring to satisfy needs for presentation control, synchronization control, and user's input control during a multimedia presentation.