• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1588-1595
• /
• 2005

In this study, the installation location of accelerometer and accelerograph for dam are investigated in the field to establish of emergency action against dam failure when earthquake occur and to guarantee the results of seismic stability of dams which are analysed with dynamic analysis method during 1999 to 2003 by KOWACO. By a comparative study concerning of domestic and foreign guidelines of seismic strong motion instrumentation for dams, "Guidelines of Seismic Strong-Motion Instrumentation Installation, Operation and Maintenance for Dams" is established to set up the standard of seismic strong-motion instrumentation for dam, are supervised by KOWACO There is some problems in taking a measure of stability of dams when earthquake event occur because the existing seismic strong motion instruments are operated independently. This make difficult to confirm the occurrence of seismic event. For that reason, in this study the plan of unified operation and maintenance system for strong-motion instrument for dams is designed. It will make possible real-time seismic monitoring, data transmission and receiving, giving warning for earthquake, and exchanging data with national seismic network.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.28-34
• /
• 2006

Recently, in accordance with the development of IT technology, it is prevalent for power quality monitors to be connected to each other via networks and share their data because such networks provide system-wide insights to customers concerning power quality. Those systems can alarm and display power quality events for the convenience of customers. However, if a power quality event occurs, it is difficult for customers to determine its cause and solution because the systems do not provide appropriate power quality diagnosis functions. The power quality management system presented in this paper has been developed to provide customers with various power quality diagnosis functions so that they can cope well with power quality problems with the right measure in the right place. This paper presents the structure and functions of the developed power quality management system and shows some results of the power diagnosis functions.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.1143-1164
• /
• 2016

Time Delay of Arrival (TDOA) estimation methods based on correlation function analysis play an important role in the micro-seismic event monitoring. It makes full use of the similarity in the recorded signals that are from the same source. However, those methods are subjected to the noise effect, particularly when the global similarity of the signals is low. This paper proposes a new approach for micro-seismic monitoring based on cross wavelet transform. The cross wavelet transform is utilized to analyse the measured signals under micro-seismic events, and the cross wavelet power spectrum is used to measure the similarity of two signals in a multi-scale dimension and subsequently identify TDOA. The offset time instant associated with the maximum cross wavelet transform spectrum power is identified as TDOA, and then the location of micro-seismic event can be identified. Individual and statistical identification tests are performed with measurement data from an in-field mine. Experimental studies demonstrate that the proposed approach significantly improves the robustness and accuracy of micro-seismic source locating in mines compared to several existing methods, such as the cross-correlation, multi-correlation, STA/LTA and Kurtosis methods.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.202-208
• /
• 2008

Condition monitoring technologies allow achieving this goal by minimizing downtime through the integrated planning and scheduling of repairs indicated by condition monitoring techniques. Thermal runaways induced by conduction problems deteriorate insulating material and cause disruptive dielectric discharges resulting in arcing faults. Therefore, having the ability to directly measure the temperature of the contacts while in service will provide more information to determine the true condition of the equipment. It allows connective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on -line condition monitoring of energized equipment is applicable both as stand alone system and with an interface for power quality monitoring system. The paper presents the results of wireless temperature monitoring: of electrical equipment at a power plant.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.881-896
• /
• 2015

The authors' research group has developed a noncontact type of sensors which directly measure the inter-story drift displacements of a building during a seismic event. Soon after that event, such seismically-induced drift displacement data would provide structural engineers with useful information to judge how the stories have been damaged. This paper presents a scheme of estimating the story cumulative plastic deformation ratios based on such measured drift displacement information toward the building safety monitoring. The presented scheme requires the data of story drift displacements and the ground motion acceleration. The involved calculations are rather simple without any detailed information on structural elements required: the story hysteresis loops are first estimated and then the cumulative plastic deformation ratio of each story is evaluated from the estimated hysteresis. The effectiveness of the scheme is demonstrated by utilizing the data of full-scale building model experiment performed at E-defense and conducting numerical simulations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.111-112
• /
• 2020

As buildings in South Korea become more skyscrapers, the risk of fire is also emerging. Thus, regulations, regulations, and guidelines are being improved to prevent the spread of smoke in the event of a fire in high-rise buildings, but research on smoke flow and pressure distribution in vertical spaces is insufficient. Therefore, in this study, the temperature of each floor in the vertical space according to the size of the fire is measured through the miniature model experiment, and the pressure difference is calculated to establish the basic data for the improvement of the performance of domestic air supply facilities in the future. Thus, a scale model of one-sixth the size of the actual building was produced to measure the temperature, and the pressure difference was derived by substituting the value for the expression. The pressure difference varies depending on the size of the cause of the fire, and it is believed that the differential pressure and conditions of the building should be taken into account before calculating the supply volume for the analysis of the pressure difference according to the size of the cause of the fire in the event of fire.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.300-300
• /
• 2021

최근 기후변화와 기상이변으로 예측하지 못한 게릴라성의 국지성호우로 인해서 과거 장마와 같은 피해가 아닌 변화된 강우패턴으로 막대한 피해가 나타나고 있다. 또한, 이러한 게릴라성 호우는 예측 또한 어려운 경향을 나타낸다. 이러한 피해를 방지하기 위해 단기유출 예측을 위해 사용되는 다양한 모형들 가운데 GRM(Grid based Rainfall-runoff Model)을 사용하였으며, GRM모델은 단기유출해석에 사용되며 국내에서 개발된 물리적 기반 모형이다. 본 연구에서는 한강의 하류인 청미천 유역을 대상으로 강우-유출 분석을 진행하였으며, 환경부의 11개 기상관측소의 자료를 이용한 티센망도 기반의 면적강우량으로 산정하였고 이를 GRM에 적용하였다. 강우자료의 Event 선정기간은 2011년 6월 29일부터 2011년 7월 1일까지 86.83mm 강수가 내린 Event이다. 공간자료는 국토지리정보원의 90M DEM(Digital Elevation Model), 농촌진흥청의 정밀토양도와 토심, 환경부 환경공간서비스의 대분류 토지이용도를 이용하였다. 또한, 검정을 위해서 정형우도인 NSE, 비정형우도인 Log-normal 우도를 이용하여 분석하였으며, 각각의 결과값은 NSE 0.966, Log-normal은 -1214.97의 값을 나타냈다. 추후, 다양한 적합지표를 이용하여 GRM의 강우패턴별, 유역별대표매개수가 산정된다면 홍수방어를 위한 강우-유출 모형으로 매우 유용하게 활용될 것으로 판단된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.121-128
• /
• 2017

In this paper, we propose a dual-channel acoustic event detection (AED) method using nonnegative tensor factorization (NTF) and hidden Markov model (HMM) in order to improve detection accuracy of AED in multisource environments. The proposed method first detects multiple acoustic events by utilizing channel gains obtained from the NTF technique applied to dual-channel input signals. After that, an HMM-based likelihood ratio test is carried out to verify the detected events by using channel gains. The detection accuracy of the proposed method is measured by F-measures under 9 different multisource conditions. Then, it is also compared with those of conventional AED methods such as Gaussian mixture model and nonnegative matrix factorization. It is shown from the experiments that the proposed method outperforms the convectional methods under all the multisource conditions.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.237-247
• /
• 2016

This study analyzed quantitative effects of ISMS certification. To measure the company value change the stock data was used and the methodology of event study was also applied. Event study methodology is a method of analyzing the effects of information or public announcement about certain events on the stock market through abnormal return of stock price. First, ISMS certification was acquired followed by the measurement of abnormal excess return of company. Based on the increase or decrease of abnormal excess return, the group was classified. There are 3 types of groups("Increase", "Reduce", "Maintain"). Next, the cluster analysis was performed for each group. Cluster analysis or clustering is the task of grouping a set of objects in such a way that objects in the same group (called a cluster) are more similar (in some sense or another) to each other than to those in other groups(clusters). The purpose of this study is to have a quantitative measurement of performance of ISMS certification. So, the result of this study will be promoted a company's ISMS certification acquisition. And it would further be beneficial to your company's information security activities.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.94-101
• /
• 2002

It expected a lot of changes in mass media and documentation expression as documents on web are getting diverse, complex and massive. An Annals of The Chosun Dynasty is a very important document used for researching historical facts and is published as CD-Rom. However. The CD-Rom was composed as content-based and using simple search method, therefore it's very difficult to make determine event-relationship between documents factors. Because of that, we studied to discover event-relationship between documents through clustering and efficient similarity method among Annals of The Chosun Dynasty. For the research method, we discovered the best similarity method for historical written documents through simulation similarity measures of Annals of The Chosun Dynasty documents. Then we did simulation-clustering documents based on similarity probability. In evaluation of the clustered documents , the results were the same as when manually figured.