• 한국경제지리학회지
• /
• 제17권3호
• /
• pp.482-501
• /
• 2014

이 연구는 2013년 개별공지시가 자료를 활용하여 대구시 중구를 사례로 대도시 도심의 토지용도별 지가구조를 분석하였다. 분석결과, 지가구조가 토지용도에 따라 상당한 차이가 있는 것으로 밝혀졌다. 도심의 지가는 좁은 공간에도 불구하고 필지에 따라 변동성이 매우 크지만, 이것은 상업용지에 해당하는 것으로 주거용지나 주상복합용지에는 해당하지 않는다. 지가의 거리조락 역시 상업용지는 매우 크게 나타나지만, 주거용지나 주상복합용지는 거리조락 현상이 거의 없다. 주거용지와 주상복합용지는 지가최고점(PLVI)으로부터 가까울수록 지가가 오히려 하락하는 분화구 현상이 발견된다. 선형화한 지가함수의 회귀식에서도 상업용지와 업무용지는 지가의 거리 설명력이 크지만 주거용지나 주상복합용지는 거리 설명력도 미미하고, 특히 기울기가 음이 아닌 양의 값을 갖는다. 따라서 지금까지 일반적으로 상정되어 온 지가구조는 상업용지에는 유효하지만, 주거용지나 주상복합용지에는 유효하지 않다고 할 수 있다. 그러나 지가함수에 의한 토지용도의 분화 예측은 실제 토지이용 상황에 상당히 부합하여 알론소의 입찰지대이론의 현실적 적합성이 확인된다.

• 공업화학
• /
• 제24권5호
• /
• pp.562-565
• /
• 2013

고순도의 알루미늄 호일은 전기화학적 에칭을 통해 표면적을 증가시킨 후 전해 커패시터의 양극으로 사용된다. 그러나 산화 피막의 결함 및 에치 피트의 불규칙 생성에 의해 성장된 에치 피트의 분포는 불균일하며 이러한 불균일 형태는 알루미늄 넓은 표면적 분포에도 불구하고 여러 형태의 적용을 어렵게 만든다. 본 연구에서는 알루미늄의 선택적 에칭을 위해 포토리소그래피 방법으로 제작된 패턴 마스크를 사용하여 알루미늄 표면에 균일성을 갖는 보호층을 형성시켰다. 균일한 패턴을 갖는 알루미늄을 용액의 온도 및 전류밀도 등의 조건을 변경하여 실험하였고, 알루미늄 표면에 다양한 크기($2{\sim}5{\mu}m$)의 균일성을 갖는 에치 피트의 형성을 확인할 수 있었다.

• 한국응용곤충학회지
• /
• 제47권1호
• /
• pp.107-110
• /
• 2008

Tropical fire ant로 알려진 Solenopsis geminata (Fabricius)는 열대 및 온대지역에 분포하는 잡식성 개미로서, 식물에 피해를 주기도 하지만 야외활동을 하는 사람들이 물릴 경우 심하게 부어오르고 통증을 유발하는 위생해충으로 유명하며 우리나라에 침입 시 제주도 및 남부지방의 농경지 및 산림에 피해를 줄 것으로 예상되어 현재 식물방역법상 관리해충으로 지정된 종이다. 이 개미는 선박을 통하여 항구주위에서 먼저 정착하여 확산되고 있으며, 현재 동남아, 중국남부지역에서 급격히 확산되고 있다. 우리나라에서는 1990년대에는 수입식물검역 과정에서 검출실적이 1건이었으나 2000년부터 검출빈도가 증가추세에 있어 2006년도에는 7건이 검출되어 국내 침입이 우려되고 있다. 따라서, 동종에 대한 형태, 분포, 기주식물, 생태 등에 대한 자료를 정리하여 금후 수입식물검역시 참고하고 국내 침입시 조기 박멸하기 위한 자료로 이용하고자 한다.

• 에너지공학
• /
• 제21권2호
• /
• pp.124-132
• /
• 2012

본 연구에서는 북측창을 가진 강의실 내의 불균형적인 실내 조도차이를 개선하기 위해 두 가지의 자연채광시스템을 적용하였을 경우에 대하여 Photopia를 이용한 성능 시뮬레이션을 수행하였다. 특히, 본 연구에서는 태양고도가 최고 $80^{\circ}$ 이르는 하지에 청천공 상태 하에서의 태양고도에 따른 각 시스템의 배광분포곡선을 구하고 이를 이용하여 실내 조도 등을 분석하였다. 작업면의 경우, 창측과 복도측의 평균 조도차가 1000lx를 초과하였는데 시스템 설치 후에는 그 차이가 상당히 줄어드는 것으로 나타났다. 광튜브 시스템 설치시 906lx에서 603lx로 감소하였으며, 디쉬형 시스템은 308lx까지 줄어들었다. 광튜브의 성능은 태양고도에 영향을 크게 받았으며 디쉬형 집광기는 지속적인 태양추적으로 인하여 태양고도에 관계없이 일정한 성능을 보여주었다.

• 한국수자원학회논문집
• /
• 제41권6호
• /
• pp.587-595
• /
• 2008

지속기간별 강우자료의 보유연한이 충분하지 않은 지역에도 실용적인 적용이 가능한 IDF 관계식을 유도하였다. 이 관계식은 두개의 모형변수와 재현기간으로 구성된 근사식으로서, 지속기간별 강우자료를 통합하고 정규화 하는 변환과정을 통하여 통계적으로 유도되었다. 강우자료의 변환을 위하여 Kruskal-Wallis 통계량과 Manly 변환을 적용하였는데 이 결과 해석적으로 간단한 형식의 IDF 관계식을 얻을 수 있었다. 특히 보유 자료의 수가 제한된 경우 주로 발생하는 짧은 지속기간의 강우강도가 긴 지속기간의 강우강도에 비하여 작아지는 이상 현상을 완화할 수 있는 특징을 보여주었다. 실무적으로 혼란을 주고 있는 산청과 영천의 강우자료에서 발생하는 이상 현상을 처리하기 위하여 제안된 방법론을 적용한 결과 만족스러운 결과를 보여주었다.

• 한국보건간호학회지
• /
• 제6권1호
• /
• pp.32-45
• /
• 1992

An important role of community health nurses in health centers is to solve community health problems found through data collection methodology which has been used to identify the health needs of the community, diagnose the health problems and to plan health programs suitable for the health problems. Also community health nurses must be prepared to know the community health needs and to participate in the planning process. Since 1956 when the health center law was established, community health nurses have really implemented only the services which the government has asked them to do. This has kept them busy enough. But these days as society is in rapid change, community health nurses should have the flexibility to deal with the social change and demands that are unique to their community each which has different health needs and demands. So community health nurses need to identify what community health problems exist in their particular communities. The purposes of this study were as follows. 1) To explore the suitability of the health programs which the government has asked the community health nurses to do for their own communities and if these programs are not suitable, to explore the reasons why. 2) To explore the degree to which the community health nurses have the ability to identify health problems in their own communities and activate the community diagnostic process. 3) To identify the degree that the community health nurses have the ability to implement plans related to community diagnosis. 4) To find out how much data related to community health problems, the community health nurses have and how they are utilizing it. 5) To measure the community health nurses self-confidence concerning diagnostic activities for community health. The study subjects were 454 Community Health Nurses working in Health Centers in Seoul, Korea. The period of data collection was 6 days(Nov. 9th 1991-Nov. 15th 1991). A questionnaire used for data collection was composed of three different items; general characteristics, community health diagnostic activities and self-confidence in performing diagnostic activities. The results of the study are as follows. First, over one third of the respondents replied that the government required activities for their communities are not appropriate. Of these activities the most frequent reply $(51.2\%)$ indicated that many of the activities in the community were inappropriate to the actual situation. Further, $25\%$ of the replies indicated that many activities were only administratively oriented and as such not appropriate. Second, $49.8\%$ of the respondents replied that they had done general assessments and had a general idea of the health problems of their community. Effective solutions to health problems could be found with an increase in health personnel and management ability according to $41.5\%$ of the respondents. Third, to the question as to whether they had ever independently implemented a plan towards solving community diagnosed problems, $52\%$ of nurses replied 'never', $40\%$ 'occasionally' but only $7.5\%$ replied that they did it frequently. Actually there was very little done even in the basic work of collecting the necessary data. Fourth, when asked how much of basic information they had collected that might be used in community diagnosis activity, of 26 items in 5 areas, there was hardly one for which complete data had been collected. Fifteen percent did have data on the geographical aspects of their area, housing distribution and types of housing, while $17.8\%$ knew the frequency with which the health center was used. Concerning community resources, even with a list of community resources, only $12.3\%$ had data on any of these resources, and this data was incomplete. Further, information about social work institutions, and facilities was also incomplete, only $14.2\%$ of the respondents had any data and even it was incomplete; that is, in general, the nurses did not have this information. Fifth, concerning the confidence of the community health nurse in their ability to carry out community diagnoses activities, $60\%$ replied that they were very or at least nominally confident, indicating that although they were not doing community diagnostic activities they felt they could do so, as they were carrying out home visits and program planning as part of their official duties. The following recommendations are made based on the results of this study. First; since the community health nurses have a high perception of the need for community diagnostic activities and. high confidence in their ability to carry out this activity and high percentage of respondents replied that with a little training they could do this even better it is recommended that community diagnostic activity training be included in the continuing education program for community health nurses. Second, in order for the Community Health Nurses to successfully solve the health problems of their respective community they reported to a need to increase the number of health personnel, improve the facilities and the system of managing their work. Considering this, it is recommended that ways be sought to remedy these deficits.

• 한국잠사곤충학회지
• /
• 제13권2호
• /
• pp.123-133
• /
• 1971

The author is the first man who tried to use an anesthetic on insect specially for silkworm in orde to evaluate the silkworm health and silk yielding ability and the obtained results are as followings. 1. The necessary ether vapor induction for narcosis on silkworms is varied by the glowth of the silkworm which the larger worm is, the longer induction is required. For instance, it was 2∼3 minutes for the worms of third day fifth instar silkworm in case use of ether anesthetic. 2. The longer anesthetic induction for silkworms, the longer recovery needs from anesthesia. In case five minutes ether vapor induction, silkworms recovered narcosis during in 5∼130 minutes which had varied very much by the health variation. 3. The ether induction caused silkworm to vomit digestive juice from a few per cent of the worms, but the chloroform induction showed majority of the worms to vomit the digestive juice out of mouth. So, the ether was found as better anesthetic for silkworms. 4. When ether induction last more than 20∼30 minutes, the recovered silkworms can eat mulberry, but when it gets more than three hours they can not eat mulberry. And when it last more than ten minutes, the silkworm may eat mulberry leaf, but they can not spinn cocoon properly. 5. In case five minutes ether induction for silkworms on third day fifth instar, the stronger variety is, the rallier recovered from narcosis. 6. The recovering duration from narcosis varies regarding with each worm health which shows Poisson′s distribution even in a same variety silkworm. 7. The female worms recover from narcosis earlier than male worms which means the female worm is stronger than male one. 8. The later recovered silkworm from narcosis spinned more rich cocoon silk and ended with smaller pupae weight. Such a tendency showed until at some recovery duration, then the silk yield droped down on the worms recovered in more longer duration. The author (Choe) had named such a relation curve as "Silk Yield Curve against Silkworm Health." 9. The silk yield or cocoon layer ratio had varied from 13 to 27% even in a same worm varity cocoon which showed serious variation and call attention carefulness for the duplication work of a variety silkworm eggs. 10. Not always the rich silk yielding worm is the best worm during the silkworm selection and it should be considered with the silkworm health evaluation. 11. At present situation, only specific breeding expert is allowed to join in the selection service because of need many years experience by use of visual observation, but the ether anesthesia method may help such an evaluation with more accuracy and easy way even for the people in fresh on the field. 12. The effect of the narcosis on the silkworm for the next generation or hybrid worm will be reported in next publication.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• 한국해안·해양공학회논문집
• /
• 제31권2호
• /
• pp.62-72
• /
• 2019

지진해일 규모와 발생시기 예측의 어려움으로 인해 결정론적 방법으로 얻은 결과가 실제 재난을 반영하지 못하는 사례가 발생하고 있다. 따라서 지진해일의 불확실성을 확률론적으로 접근하는 확률론적 지진해일 재해도 분석(Probabilistic Tsunami Hazard Analysis) 연구의 중요성이 점차 증가하고 있다. 본 연구에서는 과거 동해안에 피해를 유발한 동해 동연부 지진에 대하여 확률론적 지진해일 재해도 분석을 위한 기초연구를 수행하였다. 초기수면변위와 해일고분포의 불확실성을 고려하기 위해 로직트리 기법을 사용하였으며, 우리나라에 내습하는 지진해일의 특성을 반영하여 분기를 구성하였다. 프랙타일 곡선을 산출하는 과정에서 분기의 수가 증가하면 시간소요가 비선형적으로 증가하므로 모든 분기를 고려하면서도 계산시간을 줄일 수 있는 개선된 방법을 제안하였다. 새로 제안된 이산가중치분포법(Discrete Weight Distribution)과 정렬기법 및 몬테카를로법으로 얻은 결과의 일관성과 소요시간을 비교하였다. 이산가중치분포법은 정렬기법을 적용한 경우보다 계산시간이 짧아 효율적인 것으로 평가되었으나, 다수의 분기나 세그먼트를 고려할 경우 몬테카를로 방법이 더 효율적인 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제83권5호
• /
• pp.693-707
• /
• 2022

Bonded joints have proven their performance against conventional joining processes such as welding, riveting and bolting. The single-lap joint is the most widely used to characterize adhesive joints in tensile-shear loadings. However, the high stress concentrations in the adhesive joint due to the non-linearity of the applied loads generate a bending moment in the joint, resulting in high stresses at the adhesive edges. Geometric optimization of the bonded joint to reduce this high stress concentration prompted various researchers to perform geometric modifications of the adhesive and adherends at their free edges. Modifying both edges of the adhesive (spew) and the adherends (bevel) has proven to be an effective solution to reduce stresses at both edges and improve stress transfer at the inner part of the adhesive layer. The majority of research aimed at improving the geometry of the plate and adhesive edges has not considered the effect of temperature and water absorption in evaluating the strength of the joint. The objective of this work is to analyze, by the finite element method, the stress distribution in an adhesive joint between two 2024-T3 aluminum plates. The effects of the adhesive fillet and adherend bevel on the bonded joint stresses were taken into account. On the other hand, degradation of the mechanical properties of the adhesive following its exposure to moisture and temperature was found. The results clearly showed that the modification of the edges of the adhesive and of the bonding agent have an important role in the durability of the bond. Although the modification of the adhesive and bonding edges significantly improves the joint strength, the simultaneous exposure of the joint to temperature and moisture generates high stress concentrations in the adhesive joint that, in most cases, can easily reach the failure point of the material even at low applied stresses.