• 대한장애인치과학회지
• /
• 제4권1호
• /
• pp.7-11
• /
• 2008

치과의사는 혈우병 환자의 치료 시 주의사항에 대해 잘 알고 있어야 한다. 혈우병 환자의 내원 시 소아과 의사 및 혈우재단 등 전문가에게 의뢰하여 환자의 상태에 대한 자문을 얻어야 하고, 치과 치료 시 적절한 계획 하에 최소의 침습적인 치료가 행해지도록 노력해야 하며, 응급 상황을 대비하여 지혈방법을 습득해야 한다. 또 환자와 보호자에게 평소 구강 관리의 중요성을 일깨워 침습적 치과 치료의 빈도를 줄일 수 있도록 해야 한다.

• Journal of Microbiology and Biotechnology
• /
• 제24권2호
• /
• pp.160-167
• /
• 2014

Oligopeptidase B (OpdB) is a serine peptidase widespread among bacteria and protozoa that has emerged as a virulence factor despite its function has not yet been precisely established. By using an OpdB-overexpressing Escherichia coli strain, we found that the overexpressed peptidase makes the bacterial cells specifically less susceptible to several proline-rich antimicrobial peptides known to penetrate into the bacterial cytosol, and that its level of activity directly correlates with the degree of resistance. We established that E. coli OpdB can efficiently hydrolyze in vitro cationic antimicrobial peptides up to 30 residues in length, even though they contained several prolines, shortening them to inactive fragments. Two consecutive basic residues are a preferred cleavage site for the peptidase. In the case of a single basic residue, there is no cleavage if proline residues are present in the $P_1$ and $P_2$ positions. These results also indicate that cytosolic peptidases may cause resistance to antimicrobial peptides that have an intracellular mechanism of action, such as the proline-rich peptides, and may contribute to define the substrate specificity of the E. coli OpdB.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.673-685
• /
• 2010

This study evaluates the fitness of brassieres through size measurement, comparative pattern analysis, cross section map analysis, 3-D shape analysis number, and fitness evaluation with a focus on domestic and overseas brands. Experimental brassieres were selected as mold brassieres of 3/4 cup in 75A size that is considered a popular design. Brands of selected brassiere were 2 domestic brands (A, B), 1 licensed brand (C), and 2 overseas brands (D, E). Subjects were 8 women in their early 20's. Data were analyzed by descriptive statistics, analysis of variance, reliability analysis, and factor analysis. The results were as follows; the size and pattern of brassieres showed a difference by each brand even though brassieres are the same design. In the wearing effect of brassieres, overseas brand brassieres played a major role in the breast-up effect, but they were not appropriate for the somatotype of Korean women. Domestic brand brassieres showed the volume-up effect, that was confirmed by the increasing bust circumference, bust depth when subjects wore it. In addition, the licensed brand brassieres showed the correction effect of body shape. Therefore, when purchasing a brassiere, the most important condition is to consider the individual characteristics of the somatotype. The results of factor analysis through a functional evaluation show that wearing satisfaction, size satisfaction, and the position of the bust point were important factors for fitness satisfaction and purchase.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1972년도 춘계종합 학술대회 초록집
• /
• pp.17.1-17
• /
• 1972

편도적출은 우리 이비인후과 임상에서 평소에 다반사로 행해지는 수술의 하나이라 하겠다. 수술술기의 개량, 마취의 발달과 더불어 각종 항생제의 발견등은 편도 적출술에 따르는 여러 가지 합병증을 감소시켰지만, 이중 수술중 또는 수술후에 왕왕 당하는 출혈문제는 가장 흔한 합병증의 하나이며 술자에게는 골치거리의 하나이기도 하여 아직껏 국내외에서 그 보고가 끊어지지 않고 있다. 특히 본증례에서와 같이 본태성 질환으로 인한 출혈의 해결에 있어서는 더욱 복잡곤란한 문제가 많을 것으로 생각된다. 혈우병은 1950년대에 이르러 각 Factor가 발견되어 현재는 혈우병 A.B.C.로 나뉘고 있다. 본증례는 11세의 남아로서 편도 척출술전에는 혈우병의 유무가 인지 못되었던 예로서 수술후 수술창에서 계속되는 출혈로 혈액응고장애를 가진 질환이라고 생각되어 여러 가지 검사결과 P.T.C의 결여로 오는 혈우병 B란 진단을 얻었기에 교훈적이고 귀중한 체험을 얻었다고 생각되어 보고하는 바이다. 환자는 수차의 수혈과 비인강탐폰 등의 방법으로 겨우 지혈되어 수술 20일만에 수술창이 치유되어 퇴원하였다.

• 천문학회지
• /
• 제31권2호
• /
• pp.161-171
• /
• 1998

We have mapped about 1.5 square degree regions of Lynds 1299, a well isolated dark cloud in the Outer Galaxy (l = $122^{\circ}$, b = $-7^{\circ}$), in the J = 1- 0 transition of $^{12}CO$ and $^{13}CO$ with the 13.7 m radio telescope at Taeduk Radio Astronomy Observatory (TRAO). We found that there are two velocity components in the molecular emission, at $V_{LSR} = -52 km S^{-1}$ (Cloud A) and -8.8 km $s^{-1}$ (Cloud B), respectively. We have derived physical parameters of two molecular clouds and discussed three different mass estimate techniques. We found that there are large discrepancies between the virial and LTE mass estimates for both clouds. The large virial mass estimate reflects the fact that both are not gravitationally bound. We adopt the mass of $5.6 {\times}10^3 \;M{\bigodot}$ for Cloud A and $1.2{\times}10^3 \;M{\bigodot}$) for Cloud B using conversion factor. Cloud A is found to be associated with a localized star forming site, and its morphology is well matching with that of far-infrared (FIR) dust emission. It shows a clear ring structure with an obvious velocity gradient. We suggest that it may be a remnant cloud from a past episode of massive star formation. Cloud B is found to be unrelated to Cloud A (d = 800 pc) and has no specific velocity structure. The average dust color temperature of the uncontaminated portion of Cloud A is estimated to be 24$\~$27.4 K. The low dust temperature may imply that there is no additional internal heating source within the cloud. The heating of the cloud is probably dominated by the interstellar radiation field except the region directly associated with the new-born B5 star. Overall, the dust properties of Cloud A are similar to those of normal dark cloud even though it does have star forming activity.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.64-71
• /
• 2003

In order to evaluate the effect of alloying elements (Nb and Sn) on the wear resistance of advanced Zr fuel claddings, sliding wear tests have been performed in room temperature air and water and these results were compared with those of commercial alloys such as Zircaloy-4, A and B alloys. As a result, the advanced Zr fuel claddings have a similar wear resistance compared with the commercial alloys. The wear resistance of the advanced Zr fuel claddings is closely releted to the content of Nb and Sn even though the effects of transition elements are involved in deforming wear properties. In the tested specimens with similar Sn content, wear volume became down to a minimum at $0.4\;wt\;\%$ Nb, then rapidly increased at 1.0 wt Nb. This behavior results in the variation of grain size with alloying contents. But Sn did not have a significant effect on the wear volume of advanced Zr fuel claddings below $1.1\;wt\%$. The relationship between alloying elements and wear behaviour was evaluated and discussed using material compatibility factor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.887-890
• /
• 1998

We present a novel multi-resolution block matching algorithm (BMA) for fast motion estimation. At the coarsest level, a full search BMA (FSBMA) is performed for searching complex or random motion. Concurrently, spatial correlation of motion vector (MV) field is used for searching continuous motion. Here we present an efficient method for searching full resolution MVs without MV decimation even at the coarsest leve. After the coarsest level search, two or three initial MV candidates are chosen for the next level. At the further levels, the MV candidates are refined within much smaller search areas. Simulation results show that in comparison with FSBMA, the proposed BMA achieves a speed-up factor over 710 with minor PSNR degradation of 0.2dB at most, under a normal MPEG2 coding environment. Furthermore, our scheme is also suitable for hardware implementation due to regular data-flow.

• 한국추진공학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2007

연소 안정화를 위해 로켓엔진 연소기에 장착될 수 있는 반파장 음향 공명기의 비선형 음향 감쇠 특성을 비선형 해석을 통해 조사하였다. 먼저, 공명기가 장착되지 않은 기본 연소실에 대해 넓은 범위의 진폭($80{\sim}150$ dB)을 갖는 음향 가진에 대한 연소실의 감쇠 거동을 조사한 결과, 진폭에 따라 연소실의 감쇠인자가 증가하며 125 dB 이상의 진폭에 대해서는 비선형 거동이 뚜렷이 나타남을 알았다. 반파장 공명기가 장착된 연소기에서의 계산 결과, 해당 공명기의 최적 동조조건은 진폭에 무관하였고, 높은 진폭의 압력파를 감쇠하는 기능은 유지되지만, 상대적으로 음향 공명기로서의 역할은 약화됨을 알 수 있었다.

• International Journal of Human Ecology
• /
• 제8권1호
• /
• pp.19-26
• /
• 2007

The object of this research was to observe the female college 220 students of aged 19-24 for four years and to examine somatotypes distribution; this research intends to contribute to the fitness of clothes by studying the body distribution that affects the clothing structure. The measurement and wearing experiment for somatotypes are done years annually. The average, standard deviation and coefficient of variation was calculated by the SAS program. The research results are as follows: The three somatotypes of side view silhouette (straight type, bend-forward type, lean-back type) showed fairly even distribution. As a result of dressing experiment with the basic bodice pattern, the most influential factor on its suitability was found to be the neck area, shoulder and ease of bodice respectively. The partial body types to observe were categorized as: shoulder(normal, slope, squared), bust(A cup, B cup, C cup), hips (normal, droop, projecting). As for the result for full body type by BMI, normal type was most dominant, and for the categorization by drop, the type A which is with small breasts and large hips was most prevalent.

• 소성∙가공
• /
• 제19권5호
• /
• pp.296-304
• /
• 2010

It is still needed to study the effect of process conditions on the final properties of injection-molded parts for producing precision optical products. Especially, the optical anisotropy, i.e., birefringence, is a significant factor to affect the function of many optical components. In the present study we have focused on the effect of holding and compression processes on the birefringence remaining in the transparent disc by examining the gap-wise distribution of birefringence and extinction angle. As a result, two extra birefringence and extinction peaks near the center in thickness direction showed the effect of holding pressure, which came from the flow in packing stage. However, more uniform birefringence distribution than injection-only cases could be found in injection/compression cases. Depends on the process condition even the flow reversal could be found from the distribution of extinction angle. Finally, graphical representation of optical indicatrix was added for better understanding the final structure of injection-only and injection/compression cases.