• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1689-1695
• /
• 2017

As a part of evaluating the volatility of iodide ions subjected to gamma irradiation, $I_2$ evaporation experiments were performed with $I_2$ and $I^-$ mixed solutions in the temperature range $26-80^{\circ}C$ in an open, well-ventilated space. The evaporation of $I_2$ was observed to follow primarily first order kinetics, depending on the $I_2$ concentration. The evaporation rate constant increased rapidly with increase in temperature. The presence of $I^-$ slightly reduced the evaporation rate of $I_2$ by forming relatively stable $I_3^-$. The effect of $Cl^-$ at <1.0 wt% on $I_2$ evaporation was insignificant. The evaporation rate constants of $I_2$ were $1.3{\times}10^{-3}min^{-1}\;cm^{-2}$, $2.4{\times}10^{-2}min^{-1}\;cm^{-2}$, and $8.6{\times}10^{-2}min^{-1}\;cm^{-2}$, at $26^{\circ}C$, $50^{\circ}C$, and $80^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.415-417
• /
• 2003

CsI 형광체는 X선에 대한 분해능 및 변환효율이 우수한 물질이다. 최근 대면적 평판형 X선 영상검출기의 변환층으로 이용하기 위해 CsI 형광체의 대면적 제조에 대한 연구가 활발히 진행되고 있다. 본 논문은 진공 열증착법을 이용하여 증착속도(3, 3.8, $4.5\;{\mu}m/min$)에 따라 $20\;{\mu}m$ 두께의 CsI 필름을 제조하였고, XRD 및 SEM 분석을 통해 CsI 필름의 기하학적 구조를 조사하였다. 증착된 CsI 필름은 증착속도에 관계없이 복잡한 다결정 구조를 가지며, $3\;{\mu}m/min$의 증착속도에서 약 $1\;{\mu}m$ 크기로 needle-like 한 columnar structure를 가졌다. As results, about 3um/min evaporation rate formed as good geometry characteristics CsI layer.

• Journal of Radiation Protection and Research
• /
• 제29권3호
• /
• pp.173-177
• /
• 2004

아시아 국가에서 주요한 섭취작물중 하나인 배추에 대하여 요오드 침적실험을 수행하였다. 방사선원으로 반감기가 60일인 $^{125}I$를 사용하여 농도변화를 관찰하였다. 실험은 피폭시기를 다르게 하여 4번에 걸쳐 수행되었다. 요오드는 NaI의 화학반응으로부터 제조되어 사용되었는데 이유는 일반적인 결정을 증발시키는 방법으로는 비교적 큰 요오드 입자가 생기기 때문에 입자조절이 가능한 화학반응을 사용하였다. 침적속도는 공기중 농도를 시간에 대해 적분한 것과 배추 표면의 표면농도로부터 얻었다. 또한 환경제거반감기도 계산되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.440-443
• /
• 2002

Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.432-435
• /
• 2002

The ultimate study of this research is to improve the properties of digital X-ray receptor based on amorphous selenium. There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. But each two systems have strength and weakness. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. ln this study, we investigated the electrical characteristic of multi-layer$(CaWO_4+a-Se)$ as a photoconductor according to the changing iodine composition ratio. The iodine composition ratio of a-Se compound is classified into 5 different kinds which have 30ppm, 100ppm, 300ppm, 500ppm, 700ppm and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 700ppm iodine showed good characteristic of $2.53nA/cm^2$ dark current and $479nC/cm^2{\cdot}mR$ net charge at $3V/{\mu}m$.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.158-166
• /
• 2010

The purification of two liquid phases ($H_2SO_4$ phase and HIx phase) formed from a Bunsen reaction in Sulfur-Iodine (SI) hydrogen production process was investigated in order to operate SI process efficiently. The each synthetic solution for two liquid phases contained impurities was prepared on the basis of a proper composition obtained from Bunsen reaction. The purification of each solution was performed by counter-current flow using a packed column at different temperatures and $N_2$ flow rates. As the results of purification, impurities existed in each phase were decreased with increasing the temperature and the $N_2$ flow rate. In particular, the increase of the $N_2$ flow rate at the lower temperatures was effective to remove impurities by a reverse Bunsen reaction without side reactions. On the whole, it may be concluded that the purification of each phase is accomplished by mixing effects of the stripping, the evaporation, and the reverse Bunsen reaction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.69-72
• /
• 2007

The objective of this work was to study the properties of purification of two liquid phase for exclusion of impurities in each phase. The experiments for process variables were carried out in the temperature range($H_{2}SO_{4}$ phase: $413{\sim}513$ K, $HI_{x}$ phase: $353{\sim}453$ K) and in the $N_{2}$ flow rate range($H_{2}SO_{4}$, $HI_{x}$ phase: $50{\sim}200$ mL/min). As the results, it is appeared that the principles of $H_{2}SO_{4}$ phase purification was due to stripping, evaporation and reverse bunsen reaction and $HI_{x}$ phase purification was due to stripping and reverse bunsen reaction. In purification of $H_{2}SO_{4}$ phase, the concentration rate of $H_{2}SO_{4}$ phase was controled by temperature but the temperature had few effects on yield of $H_{2}SO_{4}$. In purification of $HI_{x}$ phase, we observed products of side reactions($H_{2}S$, S) over 433 K. The purity of $HI_{x}$ phase was increased with increasing $N_{2}$ flow rate because impurites were decreased with increasing conversion of reverse reaction.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.13-21
• /
• 2016

The Sulfur-Iodine thermochemical hydrogen production process (SI process) consists of the Bunsen reaction section, the $H_2SO_4$ decomposition section, and the HI decomposition section. The $HI_x$ solution ($I_2-HI-H_2O$) could be recycled to Bunsen reaction section from the HI decomposition section in the operation of the integrated SI process. The phase separation characteristic of the Bunsen reaction using the $HI_x$ solution was similar to that of $I_2-H_2O-SO_2$ system. On the other hands, the amount of produced $H_2SO_4$ phase was small. To investigate the effects of $SO_2$ solubility on Bunsen reaction, the continuous Bunsen reaction was performed at variation of the amounts of $SO_2$ gas. Also, it was carried out to make sure of the effects of partial pressure of $SO_2$ in the condition of 3bar of $SO_2-O_2$ atmosphere. As the results, the characteristic of Bunsen reaction was improved with increasing the amounts and solubility of $SO_2$ gas. The concentration of Bunsen products was changed by reverse Bunsen reaction and evaporation of HI after 12 h.

• 대한환경공학회지
• /
• 제38권1호
• /
• pp.42-46
• /
• 2016

환경에 존재하는 인공방사성핵종 중 방사성요오드($^{131}I$)는 주로 갑상선질환의 치료에 사용되며 환자의 배출과정을 통해 체외로 방출된다. 붕괴가 채 끝나지 않은 $^{131}I$는 환경으로 방출되어 공공수역에서 검출될 수 있다. 본 연구는 공공수역에서 검출된 $^{131}I$ 방사능 결과의 정확도 및 신뢰도에 영향을 미치는 불확도 중 계측 과정에서 발생하는 불확도에 대하여 금강수계의 실제 사례를 조사하였다. 시료는 금강권역 삽교천 수계의 하천수 및 그 상류의 하수처리장 방류수를 대상으로 하였으며, 시료량에 따른 불확도를 확인하기 위하여 각 지점의 시료를 1, 10, 20 L로 채수하였다. 채취한 시료는 시료량에 따라 전 처리를 거친 후 1 L 마리넬리 비커에 충전하여 HPGe (High Purity Germanium) 감마선 검출기를 이용하여 10,000초 단위로 계측 분석하여 계측시간 및 방사능에 따른 측정불확도를 비교하였다. 각 지점의 방사능 농도는 0.03~1.8 Bq/L로, 채취시점에 따라 차이가 있는 것으로 나타났다. $^{131}I$의 방사능 농도가 0.3 Bq/L 수준인 경우 시료량이 1 L이면 약 80,000초 계측 시까지 핵종의 존재여부를 판단하지 못하는 경우가 발생하였으나, 같은 조건에서 시료량을 증가시켜 계측한 경우 10,000초 이상의 계측시간부터 불확도 10% 범위에 포함되는 것으로 나타났다. $^{131}I$의 짧은 반감기를 고려하여 즉시 계측이 가능한 1 L 생시료 계측 방법을 사용할 수 있으나, 불확도 수준과 전처리 및 계측에 소요되는 시간을 비교하였을 때, 10 L 시료의 계측을 통해 높은 신뢰도의 측정 결과를 얻을 수 있는 합리적인 방법이라고 판단되었다.