• 수산해양기술연구
• /
• 제52권1호
• /
• pp.65-71
• /
• 2016

Injection rate, injection quantity and injection timing of fuel are controlled precisely by electric control in CRDI system. Particularly, injection rate being influenced with injection pressure affects to spray characteristics and fuel-air ratio, so it is a very important factor in diesel combustion. In this study, injection rates in accordance with injection pressure at a constant ambient pressure were measured with Zeuch's method. Under the same condition, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. Injection start time and injection period were practically affected with injection pressure. Also, initial injection rate, spray penetration, spray angle and breakup of high density droplets region in the spray were affected with injection pressure. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for common rail direct injection system.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.532-548
• /
• 2002

A hybrid model consisting of a modified TAB (Taylor Analogy Breakup) model and DVM (Discrete Vortex Method) is proposed for numerical analysis of the evaporating spray phenomena in diesel engines. The simulation process of the hybrid model is divided into three steps. First, the droplet breakup of injected fuel is analyzed by using the modified TAB model. Second, spray evaporation is calculated based on the theory of Siebers'liquid length. The liquid length analysis of injected fuel is used to integrate the modified TAB model and DVM. Lastly, both ambient gas flow and inner vortex flow of injected fuel are analyzed by using DVM. An experiment with an evaporative free spray at the early stage of its injection was conducted under in-cylinder like conditions to examine an accuracy of the present hybrid model. The calculated results of the gas jet flow by DVM agree well with the experimental results. The calculated and experimental results all confirm that the ambient gas flow dominates the downstream diesel spray flow.

• 한국화재소방학회논문지
• /
• 제13권1호
• /
• pp.37-47
• /
• 1999

부유중인 분진의 화재 및 용기 또는 파이프의 미세한 균열에서 비산되는 가연성 액체의 분무화재의 위험성은 착화후의 고속 확산과 높은 열방출율로 인하여 매우 높은 것으로 알려졌다. 이에 대한 연구는 주로 실험적으로나 또는 거시적인 관점의 해석으로 제한되어 왔다. 본 연구는 미시적인 관점의 해석으로서 분진 및 분무를 가연성 미세 액적으로 가정하여 그의 증발과 착화에 대하여 연구하였다. 첫 단계로서 일열의 액적 배열을 계산영역으로 하여, 비정상 이차원 보존방정식들을 적용하였다. 수치해석은 일반화된 비직교 좌표계를 사용하였고, 화학반응은 Arrhenius의 법칙에 의하여 반응속도가 제어되는 일단계 반응을 고려하였다. 계산결과는 액적 주위의 온도와 반응물질의 농도분포를 시간에 따라 보여준다. 주위의 산소가 증발하는 액적의 연료와 섞이기 시작하고 착화 조건에 다다르면, 급격한 발열반응이 예혼합된 가스로부터 일어나기 시작한다. 최대온도 영역은 점차적으로 액적 표면으로 이동하며 최대온도는 착화이후 급격히 상승한다. 연료와 산소의 농도는 최대온도 영역 근처에서 최소값을 보인다. 따라서 착화순간에는 예혼합연소의 양상을 띠는 것으로 나타났다. 이후에는 예혼합 가스의 소멸로 확산연소의 양상을 띠게 된다. 액적간의 거리는 중요한 요소로서 멀리 떨어져 있는 경우부터 액적간의 거리가 가까워지면 착화지연 시간이 줄여들어 착화가 빨리 일어나는 것으로 관찰되었다. 또한 착화 후에는 최대온도 영역이 일열의 중심선으로부터 멀어지는 것으로 나타났는데 이것은 중심부근의 산소가 먼저 소모되고 외부로부터의 산소공급도 화염에 의해 차단되어 나타나는 현상이다. 이번 연구로 미세적인 착화현상에 대한 이해를 높이게 되었고 추후 복잡한 배열에 대한 연구도 가능할 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.571-571
• /
• 2012

We discovered the formation of C60 aggregates in solution by means of photoluminescence spectroscopic study on C60 in solutions. From the in-depth investigation of temperature dependence of the luminescence of C60 in toluene, benzene and CS2 solutions, we reported that the C60 aggregates are formed during cooling at the freezing temperature of these solvents. Furthermore, the C60 aggregates can be changed to stable structures by irradiating with UV pulse-laser (Nd:YAG laser, 355nm). As a consequence, we could obtain nano-scale photo-polymerized C60 clusters, which appear as round-shaped nano- scale particles in high resolution transmission electron-microscopy (HRTEM) images. However, the yield of the nano-scale C60 clusters obtained by this method is too small. So we designed and developed a system to obtain C60 cluster of macroscopic quantity by using ultrasonic nebulizer. In this system, C60 solution was vaporized to several micro-sized droplets in vacuum, resulting in the formation of C60 aggregates by evaporating solvent (toluene). The system was invented to produce nano-scale carbon clusters by the irradiation of UV light upon C60 aggregates in vacuum. We have characterized the products, C60 cluster, obtained from the system by using UV absorption spectra and HPLC spectra. Although the products have a possibility of inclusion various forms of C60 cluster, results support that the product formed from the system by using vaporizer method establishes a new method to obtain C60 cluster in macroscopic quantity. In the presentation, the details of the system and the results of characterization are reported.