• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.483-488
• /
• 2001

Until now, the tensile properties of materials can be obtained just in accordance with conventional tensile testing methods which are described in several standards such as ASTM (American Society for Testing and Materials) standard and BS (British Standard). For some cases including on-service facility materials, however, the standard testing methods cannot be applicable due to the destructive testing procedure and specimen size requirement. Therefore, simple, non-destructive and advanced indentation technique was proposed. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. In this paper, the research trend of non-destructive evaluation of tensile properties using AIS (advanced indentation system) and its application fields are reviewed and discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.135-139
• /
• 2002

The standard of quality was required to promote the consumption of potato and produce the high quality processing products. It will contribute the stability for processing products and the marketability of potato. The quality was determined based on size of tuber and content of dry matter. Even though the criteria of potato quality was involved many characters of tubers, the most important things were grading and packing of potato to create the consumption. For processing of raw materials, the standard of tubers had create between producer and processor according to size of tuber and content of dry matter. The evaluation of quality was performed over the standard to enhance the control of quality. In addition, the seed potato should be taken the evaluation to disease in the field during the period of cultivation and managed under the strict regulation in storage before release to farmer. Then, the producer of seed potato will make a good relationship to farmer with high quality tubers.

• Nuclear Engineering and Technology
• /
• v.34 no.3
• /
• pp.259-267
• /
• 2002

NFPA-803 has been referred as the Fire Protection Standard at the Nuclear Power Plants of Pressurized Water Reactor. This Standard has been used as the fire protection regulation, containing prescriptive requirements with deterministic methodology. Recently, with cumulative efforts by the U.S. Nuclear Regulatory Commission and Utilities in America to establish a new Standard, including a quantitative evaluation methodology, NFPA-805, the Performance-Based Standard for FIRE Protection for Light Water Reactor Electric Generating Plants was issued and approved by the American National Standards Institute as an American National Standard with an effective date of February 9, 2001. This paper presents an analysis result from the computer modeling for the fire simulation In addition, it proposes the idea that this kind of analytic method can be available for the facilities design of fire prevention and protection fields, as well as an evaluation for the fire suppression system with a quantitative analysis for the thermal phenomena in fire compartments in Nuclear Power Plants.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1207-1219
• /
• 2022

「Act On Contracts To Which The State Is A Party」 stipulates that the "Construction Standard Production Rate" and "Construction Standard Unit Price" be used as the criteria for determining the estimated price of construction works performed by public institutions. In this regard, issues such as the application scope of the Construction Standard Unit Price, and the effect of budget reduction continue. However, due to the lack of quantitative data on the actual application of Construction Standard Unit Price, it is difficult to objectively evaluate various issues. In order to prepare data for objective evaluation of the Construction Standard Unit Price, this study analyzed the ripple effect of applying the Construction Standard Unit Price based on the bill of quantity. As a result of the analysis, the Construction Standard Unit Price ripple effect in the civil engineering part was 9.2%, and it was analyzed that there was a ripple effect of about 1.9% based on the civil engineering direct cost. In the construction part, the ripple effect was analyzed to be relatively high at 17%, but it was found to have a ripple effect of about 3% in the construction direct cost. Based on the total direct cost, the ripple effect was calculated as 2.2%. Based on the analysis results, it is possible to evaluate the effect of applying the Standard Market Unit Price, and it is expected to be used as basic data to solve issues. As a future study, it is necessary to additionally analyze the ripple effect by Standard Market Unit Price application range (over 10 billion, over 20 billion won, etc.) and delivery system type (comprehensive evaluation, qualification examination, technical bidding, etc.). In addition, it is necessary to study the appropriate ripple effect of the Standard Market Unit Price.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.241-245
• /
• 2005

This study introduces the wind turbine (W/T) noise evaluation procedure required in the international standard (IEC 61400-11) and monitoring system for the evaluation. Noise emission characteristics of a 750kW W/T generator is investigated. Test and evaluation are performed on J48 W/T model which is under operation in Daekwanryung Wind Test Site. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level and tonality of the W/T are estimated under the wind speeds required by the international standard.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.332-337
• /
• 2009

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system, regarding Japanese standard JIS B-8122 and international standard organization, ISO-8528, was applied to the system. The evaluation methods, start-test, rapid-load-up and rapid-load-down, etc. were executed at the system, and reasonable results were acquired. The electrical and thermal efficiencies were executed and analyzed at various load conditions. The NOx emission at various load condition was also measured. Finally, the gas engine cogeneration system was installed to a site for actual usage and it was continually operated during more than 6 months as the site condition.

• 연구논문집
• /
• s.28
• /
• pp.229-238
• /
• 1998

Materials and parts required for nondestructive testing should be evaluated using with standard block. And it is ruled that standard blocks should be fabricated from same or similar material with test specimen. In order to manufacture and export materials and parts, quality assurance system should be required. In this paper, ultrasonic characteristics of ASTM 4340 steel ultrasonic standard block are investigated for nondestructive evaluation of udimet 720Li disc. Microstructures of udimet 720Li alloy are investigated using with optical and transmission electron microscope. Also ultrasonic transit time and attenuation are measured from high power ultrasonic analysis system with phase adjustment method. Conclusively, it is proved that 4340 steel ultrasonic standard block can be use for nondestructive evaluation of udimet 720Li disc.

• The Journal of Korean Society for School & Community Health Education
• /
• v.11 no.2
• /
• pp.29-42
• /
• 2010

Objectives: This study was conducted to examine the relations of 'self-body evaluation', self-esteem, and health behavior among junior high school girls, analysing influencing factors for their health behavior, and building a base for its improvement. Methods: Data collection was conducted by self-report survey. Survey participants were 330 junior high school girl students in the area of Seoul, 221 from women's junior high schools and 109, coed schools. Survey included general characteristics, self-body evaluation, self-esteem, and health behavior. Results: 1. In their self-body evaluation, the students gave themselves $3.27{\pm}.53$ scores of the total 5, and of general characteristics, BMI, ideal BMI, personality, living standard were statistically significant different. 2. The scores for the girl students' health behavior were $2.77{\pm}0.37$ of total 4, and of general characteristics, school forms, grades, living standard were statistically significant different. characteristics, school forms, personality, school grades, living standard were statistically significant different. 3. The girls' self-body evaluation and self-esteem showed a low level of negative significant difference and their self-body evaluation and health behavior were significantly different, but a low level of negative significant difference. And the relationship between self-esteem and health behavior showed a high level of positive significant difference. 4. Influencing factors for the girls' health behavior showed a significant difference in self-esteem and school forms of general characteristics, self-body evaluation, and self-esteem.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.35 no.4
• /
• pp.105-120
• /
• 2022

Objectives: The purpose of this study is to investigate the perception of Korean Medicine (KM) doctors toward infertility treatment evaluation tools and develop a standard evaluation tool for mental and physical function improvement following Korean medicine treatment. Methods: An online survey (Moaform) was conducted, and responses were analyzed for members of the Society of Korean Medicine Obstetrics and Gynecology and KM doctors who participated in the 2021-2022 traditional Korean medicine treatment infertility support program in Gyeonggi-do. Results: In fertility treatment, the most effective indicators that KM doctors wanted to evaluate other than pregnancy and childbirth were reproductive health indicators, overall health improvement, and stress improvement (33.1%, 21.2%, 18.9%). Furthermore, 45.1% of the respondents had experience using the presented infertility stress evaluation tools. For each evaluation tool, 52.1% and 54.6% of the respondents answered that it 'does not reflect the changing circumstances of the times' and that there were 'too many questions'. As for the developing a standard evaluation tool for infertility treatment in KM, KM doctors expected a simple and clear tool focusing on the pregnancy rate. They also wanted the tool to include a reproductive health index, overall function improvement and stress improvements. Conclusions: The survey confirmed the need to evaluate indicators for reproductive health, mental health, and infertility stress in addition to pregnancy rate to assess the effectiveness of KM infertility treatment. It also confirms the necessity of developing an infertility stress evaluation tool with simplified questions that reflects the changing time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1268-1274
• /
• 2007

A recently developed methods for the on-site calibration of the voltage transformer (VT) comparator system have been reviewed in the paper. The method utilizes the several traveling standards consisting of the VT, the non-reactive standard resistors, the wide ratio error VT, and the decade resistors. The VT is used for the absolute evaluation of a standard VT belonging to the industry. The non-reactive standard resistor and wide ratio error VT are used for the linearity check of errors in the voltage comparator of the industry. The decade resistors are used for evaluation of a VT burden of the industry.