• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.285-290
• /
• 2018

This study was aimed to evaluate the possibility of application to the KS A ISO 2859-1 Easy test, an international standards sampling inspection, to replace a sampling method of the current grading standard of chicken meats for the first time. As a result of screening capability to check for defective products, the current sampling was 0.61 and the KS A ISO 2859-1 Normal test was 0.70, suggesting that the latter inspection method was more accurate. If the KS A ISO 2859-1 conversion principle is applied, 40,530 won per day is saved for a 50-lot inspection. The current sampling and the KS A ISO 2859-1 Easy test did not exceed the reject limit for the number of defective products to satisfy the grade $1^+$ on chicken carcass size numbers 12, 9 and 8. Freshness was not significantly different between the current sampling and the KS A ISO 2859-1 Easy test. It is expected that using the KS A ISO 2859-1 Easy test with a smaller sample volume will have the same level of quality evaluation as the current sampling method while reducing costs.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.29-35
• /
• 2005

The present study was compared and discussed with focus on the evaluation for the Importance Level of Design Elements and the Case Study Designing with respect to Environmental-Friendly Apartment Housing. It was examined that there were some differences between the result of Importance Level and the suggested details from Case Study. From the result of Importance Level, evaluation was highly given on the planned principles regarding effective utilization of landuse, ecological principle and reflection of varities, while from the result of Case Study on the planned principles regarding health of residents and amenity. Accordingly the present development method and the fundamental understanding on Environmental -Fiendly Apartment housing should be changed on the basis of the results as above.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.91-98
• /
• 2011

This study is to concern about the effort of architectural practice to realize the sustainable architecture. It is necessary to know about the integrated design method which combines the passive design method with the active design method from the initial design phase. One case study is followed to explain the method. Integrated design starts from defining the project and goal setting, site evaluation, design concept, design optimization, documents and specifications, bidding and construction and post occupancy evaluation followed respectively. In order to construct the sustainable design, sophisticated understanding about nature and its' principle is important and adaptable application of nature and climate depending on location is followed. In conclusion, architects and specialists of sustainable design should make an effort more study.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.179-186
• /
• 2002

This paper proposed LC resonant current fed high frequency inverter for high frequency induction heating using leakage inductance of transformer and, its described operating principle. The analysis of circuit presented by using normalized parameter in considering leakage inductance of transformer and, discussed characteristic evaluation of inverter circuit in detail. The proposed inverter is operating ZVS to reduce turn-on and turn-off loss of switching devices so, raised an efficiency. And, the experimental apparatus was made on base characteristic evaluation of theoretical analysis to discuss possibility on high frequency source and confirmed a rightfulness theoretical analysis. A result of study, the proposed inverter is higher utilizing factor using on leakage inductance of transformer and show possibility, which is application on high frequency power system.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.75-87
• /
• 1985

A review was performed on fatigue life prediction and strength evaluation of shot peened parts. Fatigue strength of machine parts can be improved by shot peening due to compressive residual stresses on such parts. Compressive residual stress cannot be uniquely define by peening intensity. Several measuring methods of residual stress and the principle of hole drilling method are presented. Exploratory measurement of residual stress was performed on the shot peened SM35C plate with the hole drilling method. Fatigue life and failure location of shot peened parts under bending load can be predicted by a damage parameter which is incorporated with material properties, residual stress, and applied stress conditions. Some method are presented to predict the fatigue strength of shot peened parts at any given life. Shot peening gives its full benefit to the notched machine parts of high strength steels.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.407-415
• /
• 2001

In the present study, irregular disturbances to ship dynamics is proposed, where irregular disturbances implying irregular wave and the fluctuating component of wind for the evaluation of automatic steering system of ship in following seas. Prediction method based on the principle of linear superposition. Irregular wave disturbances in following seas is calculated by frequency variation method. The mathematical model of each element of an automatic steering system is derived, which takes account of a few non-linear mechanisms. PD(Proportional-Derivative) controller and low-pass filter with a weather adjustment are adopted to modelling the characteristics of an autopilot. Performance index is introduced from the viewpoint of energy saving, which derived from the concept of energy loss on ship propulsion. Finally, the present methods are applied to two typical types of ship ; an ore carrier and a fishing boat. The various effects of control constants of autopilot on propulsive energy loss are investigated

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.1
• /
• pp.12-135
• /
• 1997

Color(and appearance)is one of the most important visual attributes in food. The favorite color of food is depend on the nation and its culture. Unfortunately the word on color ash superseded appearance as the description of the total visual perception of food. The optical properties are color, gloss, translucency, the uniformity of these attributes over the surface of the product, and the appearance boundary condition visual flavor. The major purpose of this lecture is to stress the importance of color and gloss on the basis of sensory evaluation for vegetables and these cooking process. These points are as follows: 1. Color and palatability Principle of cooking ; five tastes and five colors 2. Pigments and colorimeter Plant pigments ; Chlorophyll, Carotinoid, Anthocyan Optical properties and colorimeter Correlating instrumental and pigments data 3. Color, gloss of vegetables Effect of color and gloss on several cooking treatments 4. The importance of color of foods to the food industry and consumer

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.266-273
• /
• 2002

Pushover analysis is frequently used for evaluation of seismic performance and determination of seismic demand of a building structure in the current structural engineering practice field. However, pushover analysis has a advantage for estimation of seismic demands, which cannot account for the contributions of higher modes to response or for a redistribution of inertia forces because of structural yielding and the associated changes in the vibration properties of the structures. Recently, Chopra and Coel(2001) derived uncoupled inelastic dynamic equation of motion with several assumptions in the pushover analysis. By using this approach, pushover analysis for each mode is carried out and modal pushover analysis method, which can consider higher mode effects of the building, was suggested. The principle objective of this study is to introduced the modal pushover analysis by Chopra et al.(2001) and investigated the applicability and validity of this method for the steel moment frames subjected to various earthquake ground motions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.663-668
• /
• 2003

In this paper, an environmental factor and a durability resistance factor which adapts the concept of the Load Resistance Factor Design for safety design of RC structures is derived and a basic principle of a durability evaluation for RC structures using the factors is proposed. It is shown that durability of RC structures can be evaluated by comparing predicted value of chloride ion concentration with limit value of concentration for steel corrosion generation in reinforcement steel position and the durability of concrete manufactured for the RC structures can be also evaluated by comparing characteristic diffusion coefficient of concrete with predicted diffusion coefficient during mixture design.

• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.529-537
• /
• 1994

The principle of the Isothermal Capacitance Transient Spectroscopy[ICTS] were explained to measure the electronic trap levels in oxide ceramics. The measurement apparatus and the theory of the ICTS were described in detail. The trap energy evaluation was performed for the ZnO varistor and BaTiO3 ceramics. The grain boundary interface trap levels were detected at -5$0^{\circ}C$~6$0^{\circ}C$ in the case of ZnO varistor and PTCR samples, and the bulk trap levels were detected at 2$0^{\circ}C$~60~ in BaTiO3. The trap energy levels of the above samples could be directly determined by ICTS measurement.