Journal of agricultural medicine and community health
/
v.28
no.2
/
pp.1-14
/
2003
Objectives: This paper introduces need and supply level of rural mental health care service and especially focuses on the evaluation for the community mental health programs of Public Health Centers(PHCs) in rural areas as the facilities for primary mental health care. Methods: We defined the need as prevalance rate and service utilization rate, for which reviewed the results of the epidemiological study of mental disorders using Korean Composite International Diagnostic Interview surveyed on a nationwide scale in 2001. Supply was appraised in terms of psychiatric beds and primary mental heath care facilities such as private psychiatric clinics, facilities for social rehabilitation, PHCs running community mental health programs. For this, we reveiwed a variety of annual reports related mental health published by Ministry of Health and Welfare. To evaluate the community mental health programs of PHCs in rural areas, we selected. randomly samples out of the 3rd community health plans including the contents of community mental health programs, which submitted by 89 rural counties and 44 cities mixed with rural areas, and used the program's guideline established by central government as a standard. Results: Prevalence rates of major psychiatric diseases such as schizophrenia, alcoholism, major depression, anxiety disorder were higher in rural area than in urban area and 8.9% of psychiatric patients in both areas stayed at homes contacted with mental health manpower more than one time during the last year. Psychiatric beds were sufficiently supplied, but urban area had less beds than rural area contrary to general health care service. Psychiatric clinics were supplied very insufficiently in rural areas and PHCs bridged the gap instead. However rural PHCs got less financial support for community mental health programs from higher positioned agencies than urban PHCs. Rural community health programs not supported hardly worked out. Conclusions: Central government should consider a special policy for rural primary mental health care, because private psychiatric clinics can't be introduced in rural areas due to demand-deficiency and the financial independence of rural counties was very vulnerable.
Kim, Hee-Seon;Lee, Seon-Ki;Jang, Woohyung;Park, Chan;Lim, Hyun-Pil
Journal of Dental Rehabilitation and Applied Science
/
v.38
no.1
/
pp.18-25
/
2022
Purpose: This study aimed to evaluate the color stability and antibacterial properties of the surface of polyethyl methacrylate (PEMA) resin with zirconia nanoparticles added. Materials and Methods: The control group was pure PEMA resin, and the experiment group was PEMA resin 15 mm in diameter and 2.5 mm in thickness disk-shaped specimens with 2, 4 and 8 w/v% of zirconia nanoparticles added, which were respectively divided into Group Z2, Group Z4, and Group Z8. After analyzing the surface roughness and color stability of the specimens, their antibacterial properties were evaluated using Porphyromonas gingivalis (P. gingivalis). The Statistical analysis was performed using when normality was met in the Shapiro-Wilk test, one-way ANOVA was used to test parameters, and Tukey's test was used as a post hoc test. When normality was not met, the Kruskal-Wallis test, a non-parametric test was used (P < 0.05). Results: The surface roughness measurement found that there was no significant difference between the experimental and control groups. The color stability evaluation showed that the Z2, Z4, and Z8 groups were within the color range of natural teeth. The adhesion of P. gingivalis was evaluated to be significantly reduced in Group Z2 compared to the control group (P < 0.05). In the Z2 group, Z4 group, and Z8 group, dead cells bacteria than the control group were observed. Conclusion: In conclusion, PEMA resin with zirconia nanoparticles added was within the range of natural teeth in color and reduced the adhesion of P. gingivalis.
Journal of Dental Rehabilitation and Applied Science
/
v.28
no.1
/
pp.67-78
/
2012
The purpose of this study was to determine whether there were differences in shear bond strength to human dentin using IDS technique compared with DDS. Forty freshly extracted human molars were and devided into 4 groups. The control group specimens were, on the morrow of tooth preparation, light-cured after application of dentin bonding agent and cemented with resin cement. The IDS/SE(immediate dentin sealing, Clearfil$^{TM}$ SE Bond) and IDS/SB (immediate dentin sealing, Adapter$^{TM}$ Single Bond 2) specimens were, on the morrow of tooth preparation, light-cured after application of dentin bonding agent(Clearfil$^{TM}$ SE Bond and Adapter$^{TM}$ Sing Bond 2, respectively), whereas DDS specimens were not treated with any dentin bonding agent. IDS/SE, IDS/SB and DDS specimens were thermocycled. Following that delay, specimens were cemented with resin cement. The dentin bonding agent was left unpolymerized until the application of porcelain restoration. Shear bond strengths were measured using a universal testing machine. Specimens also were evaluated for mode of fracture using an optical microscope. The mean shear bond strengths of control group and IDS/SE groups were not statistically different from one another. The bond strength of IDS/SE group had a significantly higher mean than that of DDS group. There was no significant difference in the mean shear bond strength between IDS/SB(4.11MPa) and DDS group. The evaluation of failure modes indicates that most failures in the control group and IDS/SE groups were mixed, whereas failures in the DDS group were interfacial. When preparing teeth for indirect ceramic restoration, IDS with Clearfil$^{TM}$ SE Bond results in improved shear bond strength compared with DDS.
Kim, Sun-Ho;Kim, Jung Ran;Park, Hae Yean;Han, A-Reum;Kim, Jong-Bae;Park, Ji-Hyuk
Therapeutic Science for Rehabilitation
/
v.9
no.1
/
pp.24-44
/
2020
Objective : To develop an occupation-based bilateral upper extremity training protocol that can be effectively applied in a medical setting Methods : The research process using the delphi technique was carried out in 3 stages. The first stage was an open questionnaire development stage, The first draft is prepared through literature review and open questions were developed through preliminary research based on the draft. The second stage was the delphi survey. Based on the responses of the experts obtained through the open Delphi survey, the adequacy of the training protocol was shown on a Likert 5 point scale. The items were edited and deleted, reconstructed by analyzing the mean and standard deviation, stability, convergence degree, consensus, and content validity ratio through the questionnaire. The third step was the completion of the protocol. After discussions between researchers, the finalized protocol contents were reorganized to complete the occupation-based bilateral upper extremity training protocol for medical setting. Results : The final protocol consisted of 9 items across 3 areas in the occupation-based intervention selection domain and 81 items across 4 areas in the bilateral upper extremity training domain, intervention period, and evaluation. Conclusions : This study suggests an evidence-based method that collects the opinions of occupational therapists in order to use occupation-based activities as interventions in a situation that currently sees occupational therapy primarily performed in hospitals. It is also meaningful that the bilateral upper extremity training can be applied effectively in clinical situations by concretely presenting.
The Journal of Korean society of community based occupational therapy
/
v.10
no.1
/
pp.31-38
/
2020
Objective : The purpose of this study is to investigate the effects of bilateral chewing exercise applied for 6 weeks on occlusion force and masseter muscle thickness in the elderly living in the community. Methods : This study recruited 25 community residents. All participants performed bilateral chewing exercise using equipment developed for the purpose of oral chewing exercise. The chewing exercise was divided into isometric and isotonic type and applied for about 20 minutes a day, five times a week for six weeks. For the evaluation, the masseter muscle thickness and the maximum occlusion force were measured three times at three week intervals using a portable ultrasound instrument and an occlusion force gauge. Results : As a result of the change in masseter muscle thickness, baseline, 3 weeks later, and 6 weeks later referred to 7.51±0.43, 7.63±0.44, and 7.83±0.46, respectively (F=3.819, p<.05). The post hoc test resulted in a significance between baseline and 6 weeks later (p=0.023). Similarly, as a result of the change in occlusion force, baseline, 3 weeks later, and 6 weeks later referred to 265±9.22, 268±9.57, and 271.59±10.16, respectively (F=3.031, p<.05). The post hoc test resulted in a significance between baseline and 6 weeks later (p=0.048). Conclusion : This study confirmed that bilateral chewing exercise was effective for increasing masseter muscle thickness and occlusion force in the elderly. Therefore, bilateral chewing exercise can be applied as a therapeutic exercise method for improving oral function.
Kim, Hye Jin;Kim, Mi-yeon;Song, Byung-chul;Kim, Sun-ho;Kim, Jeong-hee
Journal of Dental Rehabilitation and Applied Science
/
v.35
no.1
/
pp.1-10
/
2019
Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.
Journal of Dental Rehabilitation and Applied Science
/
v.31
no.4
/
pp.294-300
/
2015
Purpose: The purpose of this study was to measure the color of low viscosity bulk-fill resin with a capping layer and to compare it with the color of microhybrid composite resin. Materials and Methods: A low viscosity bulk-fill resin (SDR) and microhybrid composite resin of shade A2 (A2) or A3 (A3) were fabricated to 4 mm thickness and light cured for 20 seconds. CIE $L^*a^*b^*$ values of the resin specimens were measured with a colorimeter. Then shade A2 and A3 microhybrid composite resin was capped over low viscosity bulk-fill resins in 2 mm thickness (SA2, SA3). The resin specimens were light cured for 20 seconds and the color was measured and analyzed (n = 10). Color differences (${\Delta}E$) between SA2 and A2, SA3 and A3 were also calculated. Results: $L^*$ value was highest in SDR followed by SA2 and SA3. $L^*$ value of A2 and A3 was the lowest. $a^*$ value was lowest in SDR followed by SA2 and SA3, and A2 and A3 was the highest. $b^*$ value was lowest in SDR followed by A2 and SA2, and A3 and SA3 was the highest. ${\Delta}E$ between A2 and SA2 (${\Delta}E=3.4$), and that between A3 and SA3 (${\Delta}E=3.1$) was lower than the perceptible color difference threshold of ${\Delta}E=3.7$. Conclusion: ${\Delta}E$ between low viscosity bulk-fill resin with a capping layer and microhybrid resin was lower than the perceptible color difference threshold.
Ha, Yae-Na;Jeong, Ji-In;Kang, Byoung-Ho;Yoo, Eun-Young
Therapeutic Science for Rehabilitation
/
v.13
no.3
/
pp.51-67
/
2024
Objective : This study investigated trends in the use of assessment tools by occupational therapists working with adults and older adults. Methods : Occupational therapists were surveyed to gather data on general characteristics, assessment tool usage, assessment time and frequency, usage trends by area, and education. The tools were categorized by the Occupational Therapy Practice Framework (OTPF) into Activities of Daily Living (ADL), Instrumental Activities of Daily Living (IADL), and play and leisure for occupations, and cognitive functions, motor functions, and psychosocial aspects for client factors. Data from 98 respondents were analyzed using frequency analysis and one-way ANOVA with SAS. Results : Most surveyed occupational therapists worked in university or general hospitals (40.82%). The assessment time per patient was under 30 min (62.25%), and re-assessment frequency was one~three months (68.38%). The most frequently used assessment tools by the OTPF were as follows: ADL: Modified Barthel Index (94.90%), IADL: Canadian Occupational Performance Measure (31.63%), cognitive functions: Mini-Mental Status Examination (89.80%), visual perception: Motor-free Visual Perception Test (56.12%), dementia: Global Deterioration Scale (63.27%), motor functions: Jamar Dynamometer & Pinch Gauge (59.18%), dysphagia: Video Fluoroscopic Swallowing Study (28.57%), physical examination: Range of Motion (59.18%), and psychosocial: Geriatric Depression Scale (33.67%). Conclusion : This study identified the use and rationale of assessment tools for occupational therapy in adults and older adults. These findings aim to enhance the curriculum and continuing education of occupational therapists.
Kim, Deok-Weon;Lee, Kang;Kim, Young-Woo;Yang, Sang-Jin;Seo, Jeong-Gook;Kim, Jin-Goo
Journal of the Korean Arthroscopy Society
/
v.12
no.3
/
pp.198-204
/
2008
Purpose: The purpose of this study is to analyze the merits and demerits of double bundle reconstruction and achieve improvements hereafter, by comparing the results of double bundle and single bundle reconstruction using tibialis anterior allograft. Materials and Methods: Twenty seven patients were divided to undergo either double bundle(n=14) or single bundle(n=13) reconstruction with tibialis anterior allograft tendon. The evaluation methods were AP laxity with KT-2000 arthrometer, isokinetic knee strength measurements, pivot-shift test, IKDC subjective score, Lysholm knee score, Tegner activity score, radiographic evaluations with postoperative MRI, and second look arthroscopy. Results: Lysholm knee score and Tegner activity score were significantly better in double bundle reconstruction. In pivot-shift test, single bundle reconstruction was evaluated as grade 0 in 10 of the knees, grade 1 in 1, and grade 2 in 2. Double bundle reconstruction was evaluated as grade 0 in 13, and grade 2 in 1. In second look arthroscopy, single bundle was evaluated as excellent in 6 of the knees, fair in 7, anteromedial bundle of double bundle reconstruction was excellent in 13 and fair in 1, and posterolateral bundle was excellent in 4, fair in 9, and poor in 1. There were no significant differences in other evaluations. Conclusion: Favorable outcome may be expected with double bundle reconstruction of ACL. However there are still need for improvement in terms of reconstruction technique and rehabilitation protocol to reduce PL bundle injury.
Kim, Yoo Hwa;Na, Young-Eun;Kim, Min Joon;Choi, Byung Ryul;Jo, Hyeong-Chan;Kim, Soon-Il
Korean journal of applied entomology
/
v.54
no.2
/
pp.99-109
/
2015
Insecticidal and antifeeding activities of 29 commercialized eco-friendly organic products for managing plant diseases and insect pests against Plutella xylostella larvae, Spodoptera exigua larvae, Frankliniella occidentalis adults, and Myzus persicae adults were tested using spraying and leaf dipping bioassays under laboratory conditions. Products containing 60% Sophora extract (EOIS) and mixtures (EOISm) with Sophora extract, Stemona japonica extract, Melia azedarach extract, and Nepeta cataria extract as well as mixtures (EOISc) with Sophora extract, Chenopodium ambrosioides extract, and Melia azedarach extract as active ingredients showed strong insecticidal activity at recommended concentration against P. xylostella larvae. At half concentration, their insecticidal activities were decreased under 50%. The EOIS gave good insecticidal activity against S. exigua larvae and also showed 85% and 95% insecticidal activity at 24 and 48 hours after treatment to F. occidentalis adults, respectively. For M. persicae adults, EOISm and mixtures (EOIR) containing rape seed extract, neem extract, and castar oil produced 93% and 68% insecticidal activity, but their activities did not be increased at double concentration. EOISm only showed 100% contact toxicity against M. persicae adults exposed to dipping leaves. Interestingly, the insecticidal activity of EOIR and EOICi (citronella oil and derris extract) against M. persicae adults was increased with exposed time and concentration. In addition, EOICe (cedar oil), EOIS, EOISm, EOISc, EOIM (microorganism), EOIR, EOIPe (plant extract), and EOIT (tea tree extract) gave strong antifeeding activity against S. exigua and P. xylostella larvae. EOIB, EOIBs, EOIM, EOICi, and EOIMc showed above 70% antifeeding activity to the lepidopteran larvae. These results indicate that mixtures containing 2 to 3 plant extracts with Sophora extract show good activities against insect pests, although the difference of insecticidal and antifeeding activities was produced depending on both a tested insect species and an active ingredient or concentration.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.