• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.147-152
• /
• 2016

This study was conducted to investigate the physicochemical quality properties and provide basic data for the activation of traditional Kamju of juice type product prepared by mixing malt and extruded rice collet powder. Malt extracts were prepared by extracting the mixture of malt and water at a weight ratio of 25:75 after soaking for 2 h at $45^{\circ}C$. Rice collet powder was prepared by adjusting the barrel temperature to $95^{\circ}C$, screw speed to $3.07{\times}g$, discharge port diameter to 7 mm and a raw material input to 50 kg/h, the powder was then ground to a particle size of 80 mesh. The physicochemical characteristics (pH, color, viscosity, reducing sugars, number of viable cells, free amino acids) and sensory evaluations were conducted at various time points during the saccharification and at different mixing ratios of the extruded rice collet powder to malt extract (5:95, 15:85, 25:75, 35:65, each at $55^{\circ}C$ for 9 h). As a result, with an increase in the proportion of the extruded rice collet powder and saccharification time, the physicochemical properties of traditional Kamju significantly improved (p<0.05). A mixing ratio of 35:65 rice collet powder to malt extract and a saccharification time of 9 h were found to be the most desirable conditions. However, based on the sensory evaluation, a mixing ratio of rice collet powder and malt extract of 25:75 and a saccharification time of 5 h resulted in the most preferable palatability of traditional Kamju (p<0.05). Therefore, the mixing ratio and saccharification time should be determined to provide a better choice with respect to the taste and economic aspects of traditional Kamju.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.210-225
• /
• 1995

The expression of $p62^{c-myc}$ and $p21^{ras}$ can be seen in many solid tumor, but the pattern and incidence of expression were different according to organ, countries, and examiners, thus it is not definitely defined. Total 67 colorectal carcinoma in paraffin sections are analysed by immunohistochemically for evaluation of the $p62^{c-myc}$ and $p21^{ras}$ expression according to the age, sex, chief complaints, location, differentiation, modified Dukes stage, using the specific monoclonal antibodies. The results were summarized as follows : The age of patients ranged from 32 years to 82 years. The mean age was 57.6 years. The expression of $p62^{c-myc}$ and $p21^{ras}$ was not correlated with age. Male was 29 cases(43.3%) and female was 38 cases(56.7%). The male to female ratio was 1:1.31. The expression of $p21^{ras}$ was increased in female(p<0.05). Abdominal pain(43.7%) was the most frequent chief complaint. The most frequent tumor location was rectum(44.8%). The expression of $p62^{c-myc}$ was increased in the rectum(p<0.05). The 65 cases(97.0%) out of 67 cases showed positive reaction of $p62^{c-myc}$ in the nucleus, cytoplasmic membrane, and cytoplasm. The 62 cases(92.5%) out of 67 cases showed positive reaction of $p21^{ras}$ in the cytoplasmic membrane and cytoplasm. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 97.0% and 91.4% in well differentiated adenocarcinoma, 100.0% and 95.0% in moderately differentiated adenocarcinoma, 90.0% and 90.0% in poorly differentiated adenocarcinoma, 100.0% and 100.0% in mucinous carcinoma. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 94.1% and 88.2% in Dukes stage $B_1$, 96.0% and 96.0% in Dukes stage $B_2$, 100.0% and 100.0% in Dukes stage $C_1$, 100.0% and 88.9% in Dukes stage $C_2$, and 100.0% and 100.0% in Dukes stage D. The expression of $p62^{c-myc}$ in metastatic colorectal carcinoma showed diffuse and strongly positive reaction than primary colorectal carcinoma. The expression of $p21^{ras}$ in primary colorectal carcinoma showed diffuse and strongly positive reaction than metastatic colorectal carcinoma.

• Journal of radiological science and technology
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2014

Recently with CT developed, various studies for reduction of exposure dose is underway. Study of bismuth shields in these studies is actively underway, and has already been applied in the clinical. However, the application of the PET/CT examination was not activated. Therefore, through this study, depending on the application of bismuth shields in the PET/CT examination, we identify the quality of the image and the impact on the Standard Uptake Value (SUV). In this study, to apply to the shielding of the breast, by using the bismuth shields that contains 0.06 mm Pb ingredients, was applied to the PET/CT GEMINI TF 64 (Philips Healthcare, Cleveland, USA). Phantom experiments using the NEMA IEC Body Phantom, images were acquired according to the presence or absence of bismuth shields apply. Also, When applying, images were obtained by varying the spacing 0, 1, 2 cm each image set to the interest range in the depth of the phantom by using EBW-NM ver.1.0. When image of the PET Emission acquires, the SUV was in increased depending on the use of bismuth shields, difference in the depth to the surface from deep in the phantom increasingly SUV increased (P<0.005). Also, when using shields, as the more gab decreased, SUV is more increased (P<0.005). Through this study, PET/CT examination by using of bismuth shields which is used as purpose of reduction dose. When using shields, the difference of SUV resulting from the application of bismuth shields exist and that difference when gab is decrease and surface is wider. Therefore, setting spacing of shield should be considered, if considering the reduction of the variation of SUV and image quality, disease of deep organs should be a priority rather than superficial organ disease. Use of bismuth shielding factor considering the standard clinical examination, decrease unnecessary exposure can be expected to be considered.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.57-66
• /
• 1988

As a method of utilization of sardine, the processing conditions of the sardine sauce extracts and the taste compounds of products were investigated. To prepare the sardine sauce extracts, chopped sardine was mixed with $1\%$, onion powder, $1\%$ garlic powder, $1\%$ red pepper powder, loft koji and $50\%$ water, and then hydrolyzed under different conditions of hydrolysis. The optimum conditions for hydrolysis were $55^{\circ}C$, 6 hours, pH 6.5-7.0. After hydrolysis, the hydrolysates were heated at $100^{\circ}C$ for 20 minutes with $5\%$ soybean protein isolate for inactivation of enzymes and improvement of bitter taste of the hydrolysates. Finally, $10\%$ salt was added to develop the characteristic taste of sauce extracts. The major taste compounds of the products were free amino acids, non-volatile organic acids and nucleotides and their related compounds. The major free amino acids in the products were arginine, histidine, lysine, glutamic acid, phenylalanine, leucine and alanine. The contents of these free amino acids were in the range of $68.2\%\;to\;69.9\%$ of the total free amino acids of products. The major non-volatile organic acids ill the products were lactic acid and $\alpha-ketoglutaric$ acid which occupied more than $95\%$ of total non-volatile organic acids. The contents of free amino acids, non-volatile organic acids and nucleotides and their related compounds were not changed during storage. Total creatinine, betaine and TMAO were seemed to act an auxiliary role in taste of the products. Judging from the results of chemical experiments and sensory evaluation, the product prepared with koji and soybean protein isolate was excellent as seasoning materials.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.53-60
• /
• 2010

This study was carried out to investigate the effect of environmental fators on backfat thickness and carcass weight and to investigate the carcass grade frequencies by sex, backfat thickness and carcass weight in commercial pigs. Total 20,450,773 of commercial pigs was used in this study, which were obtained from Korea institute for Animal Product Evaluation (KAPE) from July 1, 2007 to April 30, 2009. The averages of carcass weight and backfat thickness were $20.76{\pm}0.001mm$ and $85.97{\pm}0.002kg$, respectively. Carcass weight and backfat thickness of barrow were $22.55{\pm}0.002mm$ and $86.25{\pm}0.003kg$, respectively, which were significantly higher than those of males and females. The carcass weight and backfat thickness were increased with the slaughter years. In the effects of the season of slaughter, carcass weight was significantly higher in winter ($87.00{\pm}0.007kg$), and the backfat thickness was significantly higher in fall ($19.32{\pm}0.004mm$). In grade frequencies of carcass quality grade in sex, grade frequencies of high grade in barrow was higher than those of female in hot carcass and cold carcass. In grade frequencies of carcass quality grade in carcass weight, grade frequencies of high grade in 84~88kg was higher than the other groups in hot carcass and cold carcass. In grade frequencies of carcass quality grade in backfat thickness, grade frequencies of high grade in 22~24 mm was higher than other groups in hot carcass and cold carcass.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.419-424
• /
• 1998

Removal of monochloropropanediol (MCPD) and improvement of quality of the soy-sauce made from acid-hydrolyzate of defatted soy protein (SAHSP) were examined by fermenting the soy-sauce with soy-sauce koji or koji plus Pediococcus soya or/and Saccharomyces rouxii. The overall fermentation process performed in this work consisted sequentially of autodigestion of soy-sauce koji $(at\;45^{\circ}C\;for\;12\;days)$, lactic acid fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S3\;and\;S4)$, ethanol fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S2\;and\;S4)$,and aging $(at\;25^{\circ}C\;for\;20\;days)$. At the end of the autodigestion period, the highest MCPD removal (from the initial 38.6 ppm to 1.3 ppm) was observed in the S-2. Reducing sugar contents of the S-2 and S-4 sharply decreased from the 30th day of incubation, from the initial concentration of about 5.0% to less than 0.5% at the end of the process. Total soluble nitrogen content of all the soy-sauce products slightly increased during the overall fermentating period.The level of free glutamic acid, a major amino acid that is known to determine the taste of soy-sauce was determined to be an average value of $1270{\sim}1323\;mg/100\;mL$ of soy-sauce. The results of sensory evaluation of the fermented SAHSPs show that qualities of the S-2 and S-4 samples are nearly on the same level with that of the commercially fermented soy-sauce (p<0.05). This result suggests that the fermentation process in this work, especially the process performed with S. rouxii has a good effect for removing MCPD from SAHSP and also for improving quality of the SAHSP product.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.525-537
• /
• 2016

This study was aimed to grow organic forage as a prime requirement for organic Hanwoo cattle production over a period of 3 years (2012~2015) in Gyeongbuk region, Korea through mixed cropping of winter fodder barley with legume and application of fermented cattle manure. The effect of barley-legume mixed cropping and application of different levels of fermented cattle manure was studied on forage productivity of whole-crop barley (WCB) and evaluation of feeding capacity of Korean native cattle (Hanwoo) per unit area. The collected data was analyzed using SAS 9.3 software. Barley-legume mixed cropping increased (P<0.05) yields of dry matter (DM), crude protein (CP) and total digestible nutrients (TDN) as compared to those of sole WCB as monoculture. Similarly, acid detergent fiber (ADF) contents and relative feed value (RFV) were also higher (P<0.05) in barley-legume mixed sowing forage compared with those of sole WCB as monoculture. In case of manure application, yields of DM, CP and TDN were also found (P<0.05) highest in 100~150 kg N/ha. However, varying cattle manure levels did not influence (P>0.05) CP and neutral detergent fiber (NDF) contents. In response to increasing nitrogen application level, ADF content increased (P<0.05) but TDN content and RFV decreased (P<0.05). The Barley-legume mixed sowing and increasing application levels of fermented cattle manure also significantly enhanced (P<0.05) feeding capacity of organic Hanwoo (head/ha) having 450 kg body weight with 400 g of daily gain. Findings of present study indicated that barley-legume biculture not only cut nitrogen application level of fermented cattle manure by over 50 kg per ha but also increased their feed value and productivity of forage as compared to WCB monoculture. This would be contribution to the diversity of forage resources as well as production of organic animal product by creating low cost and high quality organic forage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.395-402
• /
• 2005

White layer cakes with 10-50% content of domestic millet and waxy millet were carried out to determine how the content of millet and waxy millet affected Quality and properties of a product. The 10% content of waxy millet resulted in the greatest volume, which decreased with the increase in the content of millet and waxy millet; up to 40% content of millet and waxy millet made no significant difference in weight from the control one. The specific loaf volume decreased with the increase in the content of millet and waxy millet. In terms of crum color, as the content of millet and waxy millet increased, the value of L tended to decrease, making it darker, and there was a significant increase in the value of a and b. As for crust color, the value of L, a, and b tended to increase with the increase in the content of millet and waxy millet, making it darker, but with no significant difference from the control one. In terms of texture, 10% content of millet and 10-20% content of waxy millet made no significant difference in hardness from the control one; as for retrogradation, waxy millet tended to make greater increase in hardness than millet. 5℃ storage resulted more rapidly in retrogradation than 25℃. The sensory evaluation showed that with the increase in the content, waxy millet, millet, and the control in order served to make it darker and harder in terms of external properties, with small pores, uneven texture, and reduced flavor in terms of internal properties. There was no significant difference between the cake with 10-20% content of millet and waxy millet and the control one in making a white layer cake by adding millet and waxy millet.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.4
• /
• pp.261-270
• /
• 2002

Purpose: Nicotinic acetylcholine receptors (nAChRs), which mediate excitatory neurotransmission, are known to participate in various neurophysiological functions. Severe losses of nAChRs have been noted in Alzheimer's and Parkinson's diseases. Therefore, noninvasive and quantitative imaging of nAChRs would offer a better understanding on the function of these receptors. In this study, $2-[^{18}F]fluoro-A85380\;([^{18}F]1)$, an ${\alpha}_4{\beta}_2$ nAChRs radioligand, was prepared using one HPLC purification and evaluated in mouse brain, and the results were compared with those in the literature. Materials and Methods: $[^{18}F]1$ was prepared by $[^{18}F]$fluorination of the iodo precursor followed by acidic deprotection and then purified by HPLC. Tissue distribution studies were performed in mouse brain at the indicated time points and the result was expressed as %ID/g. Inhibition studies were also carried out with pretreatment of various ligands. Results: One HPLC purification method gave the desired product in 15-20% radiochemical yield and with high specific activity ($38-55GBq/{\mu}mol$). Tissue distribution studies showed that $[^{18}F]1$ specifically labeled nAChRs in mouse brain with a high thalamus to cerebellum uptake ratio (13.8 at 90 min). Inhibition studios demonstrated selective binding of $[^{18}F]1$ to nAChRs, blocking the uptake of the $[^{18}F]1$ in nAChR-rich legions by selective ligands such as cytisine and nicotine which are well-known nAChRs agonists. Conclusion: This study demonstrated that the $[^{18}F]1$ produced by the method using one HPLC purification gave the results similar to those reported in the literature. Therefore, this synthetic method can be readily applied to the routine preparation of $[^{18}F]1$, a PET radioligand for ${\alpha}_4{\beta}_2$ nAChRs imaging.