• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.3
• /
• pp.343-348
• /
• 2000

Objectives : This study was conducted to integrate the results of studies assessing the association between chronic noise exposure and blood pressure. Methods : Using a MEDLINE search with noise exposure, blood pressure and hypertension as key words, we retrieved articles from the literature that were published from 1980 to December 1999. The criteria for quality evaluation were as follows: 1) the study subjects must have been workers employed at a high noise level area 2) The paper should use average and cumulative noise exposure as method for exposure evaluation. 3) Blood pressure in each article should be reported in a continuous scale Among the 77 retrieved articles, six studies were selected for quantitative meta-analysis. Before the integration of the regression coefficients for the association between blood pressure and noise level, homogeneity tests were conducted. Results : All studies were a cross-sectional design and the study subjects were industrial workers. Five papers used a time-weighted average for noise exposure and only one paper calculated the cumulative noise exposure level. The measurement of blood pressure in the majority of studios were accomplished in a resting stale, and used an average of two or more readings. The homogeneity of studies was rejected in a fixed effect model, so we used the results in a random effect model. The results of the quantitative meta-analysis, the weighted regression coefficient of noise associated with systolic blood pressure and diastolic blood pressure were 0.05 (95% confidence interval [CI]: -0.03, 0.13) and 0.06 (95% CI: -0.01, 0.13), respectively. Conclusions : Our results suggested that chronic exposure to industrial noise does not cause elevated blood pressure.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2020

Article 325 (Prevention of Fire Explosion due to Electrostatic) of the Rule for Occupational Safety and Health Standard specifies that in order to prevent the risk of disasters caused by static electricity, fire, explosion and static electricity in the production process, However, in order to do this, it is absolutely necessary to use a pre-detection technology and a detector for antistatic discharge prediction, which is a precautionary measure by static electricity in a fire / explosion hazard place, but in Korea, And there is no technical standard for the application of the technology of the explosion proof structure of the related equipment. Research methods include domestic and overseas electrostatic discharge detection technology and literature investigation of related equipment explosion proofing technology, domestic and foreign electrostatic discharge detection device production and use situation investigation, advanced foreign technology data analysis and benchmarking. In particular, we sought to verify the results of empirical experiments using electrostatic discharge detection technology through sample purchase and analysis of related major products, development of optimization technology through prototype production, evaluation, and supplementation, and expert knowledge through expert consultation. The results of this study were developed and fabricated two prototypes of electrostatic discharge detector based on the technology / standard related to electrostatic discharge detection technology in Korea and abroad through development of electrostatic discharge detection technology and development and production of detector. In addition, based on the development of electrostatic discharge detection technology, we developed an intrinsic safety explosion proof ib class explosion proof technology applicable to the process of using and handling flammable gas and flammable liquid vapor and combustible dust. In the case of the over voltage and minimum voltage are supplied to the explosion-proof structure ESD detector, check the state of the circuit and the transient and transient currents generated by the coil and capacitor elements during the input and standby of the signal pulse voltage. Explosion-proof equipment-Part 11: Intrinsically safe explosion proof structure The comparative evaluation with the reference curve in Annex A of "i" confirms that the characteristics of the intrinsically safe explosion protection structure are met.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.366-373
• /
• 2020

The task of defining the concept of 'disability' has proven to be surprisingly difficult. The way disability is assessed in the world suggests that very different conceptions of disability are being presumed. It is very hard to suggest appropriate criteria for assessing a disability that accurately demonstrates the presence and measures the severity of the disability, with proven consistency and validity provided by the assessors consuming the time and cost that the society can afford. When a rigorous framework in disability assessment procedures is used, discretion is then considerably restricted. Limited discretion tends to produce more consistency and validity in the assessment but at the cost of ignoring the individual differences or exceptional circumstances. The disability approach among the categories of the disability assessment is both the oldest and the most commonly used strategy of disability assessment around the world. Most of the criteria of disability assessment in Korea belongs to this. The McBride's criteria for disability evaluations can be used to obtain the ratio of body impairment and work disability without spending too much time and is being applied in court. Nevertheless, there are many errors and controversies, and corrections are required. On the other hand, an improvement plan for a disability evaluation method in Korea is to supplement and use the McBride's disability assessment method, which is currently the most widely used. This review article describes the conception of disability and the assessment of disability, and introduces the models of the assessment of disability to determine if the application of the McBride's criteria of disability evaluation can be justified.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.150-158
• /
• 2015

This article reports the development of an effective test procedure for detection of norovirus (NoV) in foods of diverse matrices. In this study, target foods included fermented milk, soybean paste, powders made from uncooked grains and vegetables, sesame leaves preserved in soy sauce, pickled mooli, and mooli. Viral recovery varied depending on the food matrices or elution buffers tested. Buffers were compared to determine effective elution buffers from artificially virus-contaminated foods. The conventional test procedure for concentrating viruses from food (elution-polyethylene glycol(PEG) precipitation-chloroform-PEG precipitation) was modified to save time by eliminating one PEG precipitation step. The modified procedure (elution-chloroform-PEG precipitation) was able to concentrate viruses more effectively than the conventional procedure. It also removed RT-PCR inhibitors effectively. The modified procedure was applied to target food for genogroup II NoV detection. NoV RNA was detected at the initial inoculum levels 3.125-12.5 RT-PCR units per 10-25 g tested food. The use of this newly established procedure should facilitate detection of low levels of norovirus in diverse foods.

• The Journal of Bigdata
• /
• v.8 no.1
• /
• pp.11-22
• /
• 2023

This research aimed to examine the public's perception of the "rate of sentence reduction for reasons of mental and physical weakness" and investigate if it aligns with the actual practice. Various sources, such as the Supreme Court's Courtnet search system, the number of mental evaluation requests, and the number of articles and comments related to "mental weakness" on Naver News were utilized for the analysis. The findings indicate that the public has a negative opinion on reducing sentences due to mental and physical weakness, and they are dissatisfied with the vagueness of the standards. However, this study also confirms that the court strictly applies the reduction of responsibility for individuals with mental disabilities specified in Article 10 of the Criminal Act based on the analysis of actual judgments and the number of requests for psychiatric evaluation. In other words, even though the recognition of perpetrators' mental disorders is declining, the public does not seem to recognize this trend. This creates a negative impact on the public's trust in state institutions. Therefore, law enforcement agencies, such as the police and prosecutors, need to enforce the law according to clear standards to gain public trust. The judiciary also needs to make a firm decision on commuting sentences for mentally and physically infirm individuals and inform the public of the outcomes of its application.

• School Mathematics
• /
• v.13 no.4
• /
• pp.697-716
• /
• 2011

It is known that Korean students performs very well in mathematics but show poor attitude toward mathematics. However, attitude itself is an important goal of education and it also promotes students learning. Therefore, it is important and urgent for us to find a way to improve students' attitude toward mathematics. In this article, we tried to examine characteristics of Korean students' attitude toward mathematics and identify student and school level factors affecting it. For this purpose, we analysed National Assessment of Educational Achievement (NAEA) data in 2007 when NAEA was conducted especially focused on mathematics. Main findings of this research are as follows. First, we found that attitude toward mathematics got lower as students advanced to higher grades. And among 3 sub-domains of attitude toward mathematics, interest and self-confidence were lower than perception of value of mathematics. Secondly, attitude toward mathematics was mainly affected by student background variables such as gender, achievement, participation in private tutoring, father's education level. And while school factors contributed relatively little to students' attitude toward mathematics, teacher's perception on value of school education was positively related with students' attitude in high schools and emphasis on assessment was negatively related with students' attitude in elementary schools.

• Advances in nano research
• /
• v.8 no.4
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.681-688
• /
• 2020

The Under Space Integrated Map has been constructed consistently from '15 construction projects until the present time in an effort to implement the "ground sinking prevention method" for the purpose of strengthening underground safety management. The constructed Under Space Integrated Map is utilized to provide information to the person in charge at local government through application of the system of underground information based on the administrative network and to deliver this to specialized underground-safety-effects -evaluation organizations through map extraction based on a floor plan. It suffers from a limitation in its practical use, however, since information is only provided, without promoting a separate renewal project. Although in Section 1 of Article 42 in the Special Law Concerning Underground Safety Management the content pertaining to submission obligations of completion drawings related to underground information including change and renewal are stated explicitly in order to solve this problem, submission is not sufficient since a submission window based only on the administrative network is operated. Accordingly, the Ministry of Land, Infrastructure, and Transport constructed an online system for submitting completion drawings, in an attempt to change the method by which entities involved in underground development directly submitted completion drawings. In this study, a DB standard relating to submitting completion drawings was designed and applied in order to construct an auto-renewal system based on submitted completion drawings, which will be extended to cover the range to underground structures hereafter.

• Strategy21
• /
• s.34
• /
• pp.236-261
• /
• 2014

The future role of nuclear extended deterrence in the security alliance between the United States and the Republic of Korea is currently a central concern. The gradually lessening role of reliance on nuclear weapons in US security policies broadly, combined with increasing North Korean nuclear capabilities and belligerence, raise fresh questions about the sufficiency of the "nuclear umbrella" as a pillar of the US-ROK defense posture. This article addresses the current and future role of nuclear extended deterrence in Korea in this dynamic context. The article reviews the longstanding trend toward reducing the overall size of the US nuclear arsenal, and assesses developments in US-ROK outlooks toward extended deterrence in response to the Obama administration's nuclear policies and North Korea's recent smaller-scale aggressions. The analysis finds that the challenges of deterrence credibility and allied reassurance are difficult and long-term. The analysis explains how these challenges emerge less from a shrinking US numerical arsenal size than from the sufficiency of specific nuclear and non-nuclear capabilities to meet emerging smaller-scale threats. The analysis also highlights the importance of broader strategic and political interaction in sustaining allied confidence in any joint security posture. The evaluation concludes that a strong US-ROK alliance relationship can be maintained while the size of the US nuclear arsenal continues to decline, in part because nuclear weapons in any deployment configuration are relatively ineffective means for deterring smaller-scale aggression. Nevertheless, continuing adjustment of the US-ROK extended deterrence posture to the evolving, complex and uncertain Korean peninsula security environment will remain an ongoing challenge. Finally, the article encourages further examination of the potential specific role ROK maritime forces might serve in enhancing deterrence of smaller-scale threats while minimizing risks of conflict escalation.