Yun, Kyung Hyun;Song, Sung Heon;Kim, Chung Hyoun;Hwang, Chan Hee;Lee, Jun Ho;Choi, Je Hyoung;Kim, Sun Young
Journal of Yeungnam Medical Science
/
v.34
no.2
/
pp.275-278
/
2017
Small cell lung carcinoma (SCLC) is a cancer that shows aggressive behavior, early spread to distant sites, and frequent association with distinct paraneoplastic syndromes. Spontaneous remission of cancer, particularly of SCLC, is a rare biological event. Cases involving spontaneous regression of SCLC were reported, and were associated with paraneoplastic syndromes of the nervous system. This article reports on a 78-year-old man with SCLC in remission, with neurological symptoms. The patient visited the hospital because of generalized weakness, and imaging studies revealed a mass in the lower lobe of the left lung, pathological evaluation showed SCLC. The patient refused oncologic treatment and was treated only with conservative care. In follow-up study the diameter of the mass had decreased from initial 32 mm, 9 months after admission to 20 mm, 17 months after admission to 13 mm. The patient kept complaining of generalized weakness, dizziness, and paresthesia of limbs. We assumed that, in this case, the spontaneous remission of lung cancer was related to the immunologic response directed against the tumor, which is believed to be an important factor in the pathogenesis of paraneoplastic neurologic syndromes.
The aim of this study was to develop and apply a list of meals and standard recipes using barley for diabetic patients. The degree of interest and requirements of diabetic patients were investigated for the development of meals. The ingredients of the meals were selected through the diabetic literature and previous research. While developing a list of meals, dietetic therapies for diabetic patients were considered. After developing 15 kinds of meals and modifying them through sensory evaluation, a standard recipe was completed. In the standard recipe, the menu name, the ingredients, quantity, and recipe were stated and the nutritional components were indicated. Photographs of the meals were included. The calorie prescription for the diabetic patients was aimed at elderly women, that is, those 65 years old or above, based on research showing this to be the average age of diabetics. The prescribed calories were 1,500 kcal based on the food exchange list. Weekly lists of meals including the developed dishes were made for diabetic patients. The list were modified after consultation with a clinical nutritionist. When completed, one meal item was selected for each day and cooked. A photograph was taken and presented diabetic patients. This article presents the standardized recipes of the developed list of meals and applies them to modifying the diabetic diet, with an aim to be of service to diabetic patients attempting to meet their dietetic therapy goals. We also provide basic data on institutional food services for diabetic patients and nutrition education.
Amirshahi, Alireza;Romoozi, Morteza;Raayatpanah, Mohammad Ali;Asghari, Seyyed Amir
KSII Transactions on Internet and Information Systems (TIIS)
/
v.14
no.4
/
pp.1624-1647
/
2020
Vehicular network is one of the most important subjects for researchers in recent years. Anycast routing protocols have many applications in vehicular ad hoc networks. The aim of an anycast protocol is sending packets to at least one of the receivers among candidate receivers. Studies done on anycast protocols over vehicular networks, however, have capability of implementation on some applications; they are partial, and application specific. No need to say that the lack of a comprehensive study, having a strong analytical background, is felt. Mathematical modeling in vehicular networks is difficult because the topology of these networks is dynamic. In this paper, it has been demonstrated that vehicular networks can be modeled based on time-expanded networks. The focus of this article is on geographical anycast. Three different scenarios were proposed including sending geographic anycast packet to exactly-one-destination, to at-least-one-destination, and to K-anycast destination, which can cover important applications of geographical anycast routing protocols. As the proposed model is of MILP type, a decentralized heuristic algorithm was presented. The evaluation process of this study includes the production of numerical results by Branch and Bound algorithm in general algebraic modeling system (GAMS) software and simulation of the proposed protocol in OMNET++ simulator. The comprehension of the result of proposed protocol and model shows that the applicability of this proposed protocol and its reactive conformity with the presented models based on presented metrics.
Background and Purpose : The purpose of this study was done to investigate what kinds of statistical techniques have been used to analyze data from oriental medicine research Methods : 135 original articles which used statistical techniques in their data analysis were selected from the articles published in The Journal of Korea Institute of Oriental Medicine(JKIOM) between 1995 to 2007. Results : Among 135 articles, 59 articles used descriptive statistics while 76 articles used inferential statistics for data analysis. For that 76 articles, two-sample t-test(33 articles), analysis of variance(29 articles), regression(9 articles), chi-square test(5 articles), nonparametic test(4 articles), Fisher's exact test(3 articles), and other test(9 articles) were chosen to analyze the data. SAS and SPSS statistical softwares(82.50%) were mostly used to analyze the data. Nonparametic tests were used to 4 articles(6.97%) of 67 articles and parametic tests were used to 63 articles(93.03%) of 67 articles. Among 29 articles used analysis of variance, duncan(8 articles), dunnet(4 articles), bonferroni(4 articles), turkey(3 articles), scheff(1 article) were used to do multiple comparison. 9 articles did not carry out the multiple comparison. Conclusions : It was found that the frequencies of statistical package used and statistical analysis used were not much by now. High level statistical analyses were not used most for oriental medicine research.
Journal of Korean Society of Industrial and Systems Engineering
/
v.44
no.4
/
pp.12-22
/
2021
This article suggests the machine learning model, i.e., classifier, for predicting the production quality of free-machining 303-series stainless steel(STS303) small rolling wire rods according to the operating condition of the manufacturing process. For the development of the classifier, manufacturing data for 37 operating variables were collected from the manufacturing execution system(MES) of Company S, and the 12 types of derived variables were generated based on literature review and interviews with field experts. This research was performed with data preprocessing, exploratory data analysis, feature selection, machine learning modeling, and the evaluation of alternative models. In the preprocessing stage, missing values and outliers are removed, and oversampling using SMOTE(Synthetic oversampling technique) to resolve data imbalance. Features are selected by variable importance of LASSO(Least absolute shrinkage and selection operator) regression, extreme gradient boosting(XGBoost), and random forest models. Finally, logistic regression, support vector machine(SVM), random forest, and XGBoost are developed as a classifier to predict the adequate or defective products with new operating conditions. The optimal hyper-parameters for each model are investigated by the grid search and random search methods based on k-fold cross-validation. As a result of the experiment, XGBoost showed relatively high predictive performance compared to other models with an accuracy of 0.9929, specificity of 0.9372, F1-score of 0.9963, and logarithmic loss of 0.0209. The classifier developed in this study is expected to improve productivity by enabling effective management of the manufacturing process for the STS303 small rolling wire rods.
Sun, Jong Hyo;Kim, Jae Kwang;Lim, Yong Su;Kim, Jin Joo;Jo, Jin Sung;Hyun, Sung Youl;Jeong, Ho Sung;Yang, Hyuk Jun;Lee, Gun;Kim, Jeong Ho
Journal of Trauma and Injury
/
v.22
no.2
/
pp.248-253
/
2009
Purpose: Hemodynamically unstable pelvic fractures represent therapeutic challenges for the trauma team. The authors of this article have studied the clinical profiles of the angiographic intervention population at the emergency department during four years (2005~2009) to develop clinical guidelines for preventing deaths due to multiple trauma and for predicting the prognosis during initial evaluation. Methods: We performed a retrospective review of 34 patients who had undergone angiographic interventions at the emergency department and compared the differences in clinical variables between survivors and non-survivors. Results: Representative values were compared between survivors and non-survivors : RTS (revised trauma score) 7.006 (6.376~7.841) vs. 6.128 (4.298~6.494), PRC (packed red cell) units 5.5 (2.0~11.0) vs. 15 (8.0~18.5), and lactate (mmol/L) 3.0 (1.0~7.0) vs. 8.5 (3.5~10.5). RTS (p<0.01) and PRC units before angiographic interventions (p=0.01) and lactate (p=0.02) had correlations to the final outcomes. Conclusion: The availability of an angiographic suite and persistent hypotension after adequate fluid resuscitation for pelvic trauma are good indications of angiographic intervention for pelvic hemorrhage.
In this article, we report the tandem mass spectrometry investigations for the electron capture efficiencies of the protons belonging to the different locations (generations) in a poly(propylene imine) dendrimer with three layers of a repeat unit (named as the third generation dendrimer). The employed tandem mass spectrometry methods include SORI-CAD (sustained off-resonance irradiation collisional activation dissociation) and ECD(electron capture dissociation) mass spectrometry. We obtained SORI-CAD spectra for the dendrimer ions in the different charge states, ranging from 2+ to 4+. The analysis of fragmentation sites provides the information as to where the protons are distributed among various generations of the dendrimer. Based upon this, a new strategy to study the electron capture efficiencies of the protons is utilized to examine a new type of triplycharged ions by SORI-CAD, i.e., the 3+ ions generated from the charge reduction of the native 4+ ions by ECD: (M+4H)$^{4+}\;+\;e^-\;{\rightarrow}$ (M+4H)$^{3+\bullet}$${\rightarrow}\;({H^{\bullet}}_{ejected}$) + (M+3H)$^{3+}\;\rightarrow$ CAD. Interestingly, comparison of these four SORICAD spectra indicates that the proton distribution in the charge-reduced 3+ ions is very close to that in the native 4+ ions. It further suggests that in this synthetic polymer ($\sim$1.7 kDa) with an artificial architecture, the electron capture efficiencies of the protons are actually insensitive to where they are located in the molecule. This is somewhat contradictory to common expectations that the protons in the inner generations may not be well exposed to the incoming electron irradiation as much as the outer ones are, thus may be less efficient for electron capture. This finding may carry some implications for the case of medium sized peptide ions with similar masses, which are known to show no obvious site-specific fragmentations in ECD MS.
This article presents an evaluation of the effects of coating conditions on the enteric coating quality of soft gelatin capsules containing Omega-3 fatty acids. Three conditions were controlled: concentration of hydroxypropyl methylcellulose phthalate (6, 8, and 10 wt% in solution), temperature of the inlet air (32, 35, and $38^{\circ}C$), and the coating solution feed rate (7.5, 11.25, and 15.0 g/min). The transparency of the enteric coated soft gelatin capsules was evaluated by measuring the degree of whiteness of the surface using a spectrophotometer. Results showed that the most important parameter in the enteric coating process was the coating solution feed rate. As the coating solution feed rate decreased and inlet air temperature increased, the degree of whiteness of coating surfaces decreased. We also evaluated the disintegration properties of the enteric coated capsules in accordance with the Korea Health Functional Food Code.
Kowaltowski, Doris;Granja, Ariovaldo Denis;Moreira, Daniel de Carvalho;Pina, Silvia Mikami;Oliva, Carolina Asensio;Castro, Mariana Rios
Journal of the Korean housing association
/
v.26
no.6
/
pp.35-42
/
2015
The Brazilian Federal Housing Program "Minha Casa Minha Vida" -PMCMV (My House My Life) is part of a large housing policy to eradicate the housing deficit, estimated at around five million homes in the country. The Ministry for Cities created a network of independent research organizations to evaluate the program, and the PMCMV has attracted many studies. Despite the inherent worth of these individual studies, there is a need for a holistic evaluation. A Systematic Literature Review (SLR) is seen as an important contribution to focus research efforts on the problems identified, to avoid the repetition of studies and to provide novel insights. This article carried out a SLR to map and quantify the types of research and represent a graphic panorama of published studies. Gap spotting was part of the study. In the five-year period from 2010-2014, the SLR identified 1489 bibliographic items. The panorama is categorised according to types of publications, and the analysis of items shows that most studies are concentrated on housing policies, financial questions, urban impacts and Brazilian social development. The results of this SLR raise some new research questions and show opportunities to reduce errors in the housing projects themselves.
Mishra, Kaushik;Panda, Subrata K.;Kumar, Vikash;Dewangan, Hukum Chand
Smart Structures and Systems
/
v.26
no.3
/
pp.391-401
/
2020
The present article reports the feasibility of the electrical energy generation from ambient low-frequency vibration using a piezoelectric material mounted on a bimorph cantilever beam actuator. A corresponding higher-order analytical model is developed using MATLAB in conjunction with finite element method under low-frequency with both damped and undamped conditions. An alternate model is also developed to check the material and dimensional viability of both piezoelectric materials (mainly focussed to PVDF and PZT) and the base material. Also, Genetic Algorithm is implemented to find the optimum dimensions which can produce the higher values of voltage at low-frequency frequencies (≤ 100 Hz). The delamination constraints are employed to avoid inter-laminar stresses and to increase the fracture toughness. The delamination has been done using a Teflon sheet sandwiched in between base plates and the piezo material is stuck to the base plate using adhesives. The analytical model is tested for both homogenous and isotropic material characteristics of the base material and extended to investigate the effect of the different geometrical parameters (base plate dimensions, piezo layer dimensions and placement, delamination thickness and placement, excitation frequency) on the model responses of the bimorph cantilever beam. It has been observed that when the base material characteristics are homogenous, the efficiency of the model remains higher when compared to the condition when it is of isotropic material. The necessary convergence behaviour of the current numerical model has been established and checked for the accuracy by comparing with available published results. Finally, using the results obtained from the model, a prototype is fabricated for the experimental validation via a suitable circuit considering Glass fibre and Aluminium as the bimorph material.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.