• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.121-134
• /
• 2023

This paper tested 11 concrete-encased concrete-filled steel tube (CFST) composite columns and one reinforced concrete column under combined axial compression and lateral loads. The primary parameters, including the loading system, axial compression ratio, volume stirrup ratio, diameter-to-thickness ratio of the steel tube, and stirrup form, were varied. The influence of the parameters on the failure mode, strength, ductility, energy dissipation, strength degradation, and damage evolution of the composite columns were revealed. Moreover, a two-parameter nonlinear seismic damage model for composite columns was established, which can reflect the degree and development process of the seismic damage. In addition, the relationships among the inter-story drift ratio, damage index and seismic performance level of composite columns were established to provide a theoretical basis for seismic performance design and damage assessments.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.965-970
• /
• 2001

The object of this research is to evaluate the seismic performance of existing RC bridge piers that were constructed before the adoption of the seismic design provision of Korea Bridge Design Specification in 1992. In this research, adopted test parameters were limited ductile design or non-seismic design, aspect ratio, confinement steel type, loading pattern, lap-spliced ratio for longitudinal reinforcement. This study has been performed to verify the effect of test parameter by quasi-static test. Quasi-static test has been done to investigate the physical seismic performance of RC bridge piers, such as lateral force-displacement hysteretic curve, envelope curve etc. It has been observed that seismic performance of lap-spliced test specimen, non-seismically designed specimens, was significantly reduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.967-972
• /
• 2001

An axial fan design code, called iDesignFan$^{TM}$, was developed. In this code, three major loss models were used to predicted the aerodynamic performance of a fan. The overall sound pressure level, predicted from steady blade loading, is also used as an input parameter from the third loop of the designing process to acquire most silent fan for the given aerodynamic performance parameters. With this kind of inverse design concept used in this code, the period of designing a fan, which has given aerodynamic performance with minimal acoustic noise, is significantly shortened. The experimental results of a prototype fan, designed by this code, showed that aerodynamic and acoustic performance of an axial fan is reasonably well predicted. Thus, one can design/develop an axial fan in a short time by using the code.e.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.173-182
• /
• 2005

The Performance of U-tube ground heat exchanger for geothermal heat Pump systems depends on the thermal properties of the soil, as well as grout or backfill materials in the borehole. In-situ tests provide a means of estimating some of these properties. In this study, in-situ thermal response tests were completed on two vertical boreholes, 130 m deep with 62 mm diameter high density polyethylene U-tubes. The tests were conducted by adding a monitored amount of heat to water over a $17\~18$ hour period for each vertical boreholes. By monitoring the water temperatures entering and exiting the loop and heat load, overall thermal conductivity values of grout/soil formation were determined. Two parameter estimation models for evaluation of thermal response test data were compared when applied on the same temperature response data. One model is based on line-source theory and the other is a numerical one-dimensional finite difference model. The average thermal conductivity deviation between measured data and these models is of the magnitude $1\%$ to $5\%$.

• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• 정보관리학회지
• /
• 제19권3호
• /
• pp.161-188
• /
• 2002

1990년대에 들어서면서 보편화되기 시작한 정보화의 물결은 도서관의 서비스 형태에도 많은 변화를 가져왔다. 그러나 도서관 이용자의 입장에서는 어떤 형태의 서비스가 제공되더라도 기본적으로 이용자가 제공받는 서비스일 뿐, 도서관 이용에 대한 느낌이나 감정 등을 포함하는 서비스의 만족도는 제공받은 서비스의 품질에 의해서 좌우될 수밖에 없다는 특성을 갖는다. 본 연구는 도서관의 서비스 제공이 갖는 이러한 기본적인 특성에 착안하여 이용자들의 관점에서 서비스의 품질 수준을 평가하고, 이에 영향을 미치는 주된 요인들을 파악하여, 향후 더욱 높은 수준의 서비스를 제공할 수 있는 기틀을 마련하고자 하였다. 연구의 모형으로는 서비스 품질을 측정할 때 이용되는 서브퀄(SERVQUAL) 모형을 채택하여, 전문도서관에서 이용자들이 느끼는 서비스 품질에 대한 기대와 지각을 측정하였다.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.220-223
• /
• 2011

Respiration signal of the vital signs is an important parameter in clinical parts. To extract the respiration signal from PPG signal for mobile healthcare system is difficult because the bands of the motion artifacts and respiration in the frequency domain are overlapped. This study to improve this problem suggested a respiration extraction method using the independent component analysis and evaluated its performances. In results of evaluation, the ICA method showed better performance than LPF suggested recently.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.267-276
• /
• 1991

This paper describes syntactic pattern recognition algorithm for pattern recognition and diagnostic parameter extraction of ECG signal. ECG signal which is represented linguistic string is evaluated by pattern grammar and its interpreter-LALR(1) parser for pattern recognition. The proposed pattern grammar performs syntactic analysis and semantic evaluation simultaneously. The performance of proposed algorithm has been evaluated using CSE database.

• 한국ITS학회 논문지
• /
• 제12권5호
• /
• pp.52-60
• /
• 2013

세계 각국에서 연구개발 중인 ITS 기술은 기존 도로 인프라의 효율성 극대화, 복잡한 교통문제 해결 그리고 운전자 편의 서비스 제공 등을 해결하기 위한 방안으로 기대되고 있다. 이러한 ITS 기술의 핵심은 서버가 교통정보를 수집하고 수집된 정보를 빠르고 정확하게 필요한 사용자에게 제공하는데 있다. 실제 주행환경에서는 차량과 기지국 주변에 수많은 통신장애요소들이 혼재함으로 ITS관련 서비스를 끊김없이 보장하기 위해서는 정확하고 잡음신호에 강인한 핸드오버 기술이 필요하다. 본 논문에서는 실제 차량용 통신장치에 구현된 WAVE 핸드오버 알고리즘을 소개하고 성능에 영향을 미치는 5가지 주요 파라미터를 도출하였다. 본 논문에서는 고속주행 시험도로에서 도출된 파라미터들에 대해 여러 값을 대응하여 각각의 조건에서 핸드오버 성능 변화를 분석하였다. 본 논문의 시험결과는 빈번하게 발생하는 핸드오버 핑퐁 문제 해결을 위해 핸드오버 알고리즘에 사용되는 파라미터 값을 얼마나 잘 설정해야 하는지를 설명해준다.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.141-147
• /
• 2008

This paper deals with a new and improved control technique for shunt active filters (AF) used for compensating unwanted harmonic currents injected in the mains due to nonlinear varying loads. This work is motivated by the need to find a permanent solution to the rigorous hit and trial method for evaluating system parameters in an indirect control of AF. A fuzzy pre-compensated PI (Proportional-Integral) controller is used to fuzzify the reference DC voltage of AF to the controller input so that the overshoots and undershoots in its DC link voltage are minimized and the settling time is improved. A three-phase diode rectifier with R-L (Resistive-Inductive) load is used as a non-linear load to study the effectiveness of the proposed controller of the AF. Robustness to filter parameter variations, insensitivity to controller parameter variations, and transient response has been taken as performance evaluation parameters. The results are shown through simulations in Matlab using power system block sets to demonstrate the capability of the proposed controller of the AF.