Although Equvalent Magnetic Circuit (EMC) method. Using lumped parameter and numerical analysis method are widely used for electric machine analysis. these are neither always accurate enough nor sometimes available to easily use. Moreover three dimensional finite element method (3D-FEM) is inherently unsuitable for electric machine performance evaluation due to its poor computational efficiency, such as too long calculation time and difficulty in modeling for analysis. In this paper, Nonlinear Equivalent Magnetic Circuit (NEMC) method in combination with 2D-FEM is proposed to analyze the electric machine requiring 3D-FEM, and this method applys to torque evaluation for rotary actuator of Electro Magnetic Electronic Controller Power Steering (EM-ECPS).
제조 공정 데이터에 있어 주조 공정은 가장 중요한 공정이면서 높은 불량률의 원인을 발생시키는 공정이다. 주조 공정의 품질관리는 생산성과 품질평가의 핵심 요소라 할 수 있다. 본 연구에서는 공정 데이터를 통한 요인 분석, 상관 분석, 회귀 분석 결과를 기반으로 최적화 된 머신러닝 모델 알고리즘을 개발한다. 이를 적용한 주조공정을 통해서 불량률을 줄이고 스마트 팩토리의 데이터 적합성을 검증하고자 한다.
인터넷을 중심으로 최근의 네트워크의 발전은 데이터 전송량의 범위를 멀티미디어 정보까지 확대시킴에 따라 멀티미디어 서비스를 보장하기 위해서 기존 인터넷의 Best Effort service에서 제공하지 못하는 end-to-end QoS(Quality of Service)의 제공이 필수적이다. 이를 위해 일정한 수준의 대역폭, 전송지연, 지연변이, 데이터 손실률 등의 network parameter 뿐만 아니라 시스템 내에서도 일정 수준의 CPU time 이나 메모리를 보장해 주어야 한다. 이에 따라 한정된 자원 안에서 멀티미디어 데이터를 분산시켜 네트워크 자원을 효율적으로 관리하기 위해 네트워크 자원 상황에 따라 적절하게 서비스 레벨을 조절하는 QoS 기반 통신 미들웨어의 개발이 시급하다. 또한 네트워크 시스템 및 application 개발자의 입장에서는 이를 구현하기 위해 실제 사용자가 느끼고 평가하게 되는 QoS의 객관적이고 사실적인 측정이 절실히 요구된다. 이를 위해 ATM 망상에서 보다 편리한 QoS 측정장치를 개발하고 또한 이러한 측정기술을 바탕으로 데이터를 추출하여 향상된 QoS를 제공하기 위한 개선된 미들웨어의 실질적인 메커니즘 개발과 검증에 적용한다.
The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.
Image noise reduction algorithm performs important functions in light microscopy. This study aims to systematically review the research trend of types and performance evaluation methods of noise reduction algorithm in light microscopic images. A systematic literature search of three databases of publications from January 1985 to May 2020 was conducted; of the 139 publications reviewed, 16 were included in this study. For each research result, the subjects were categorized into four major frameworks-1. noise reduction method, 2. imaging technique, 3. imaging type, and 4. evaluation method-and analyzed. Since 2003, related studies have been conducted and published, and the number of papers has increased over the years and begun to decrease since 2016. The most commonly used method of noise reduction algorithm for light microscopy images was wavelet-transform-based technology, which was mostly applied in basic systems. In addition, research on the real experimental image was performed more actively than on the simulation condition, with the main case being to use the comparison parameter as an evaluation method. This systematic review is expected to be extremely useful in the future method of numerically analyzing the noise reduction efficiency of light microscopy images.
The borehole heat exchanger of Geothermal Heat Pump (GHP) system should be sustainable and cost effective for long term operation. To guaranty the performance of the system thermal Response Tests (TRTs) with simple recommended procedures have been applied in many countries. Korea government developed a standard TRT procedure in order to control the quality on GHP projects. In the TRT procedure interpretation method has a rule that data set has to be interpreted by the line source model(LSM). The LSM employes some assumptions that surrounding medium is homogeneous and the line source is infinite and constant heat flux, however real ground condition is unisotropic and heterogeneous, and showing regional or local ground water flows in many cases. We need to develope improved evaluation models to estimate accurate ground thermal conductivity with respect to geological and influence of ground water because current TRT standard test procedure has limitations to be applied for every locations and system. This study surveyed the uncertainty of the thermal parameters from the interpretation method considering different evaluation period. The interpretation of 208 TRT data sets represents limitations of LSM application that some obtained ground thermal conductivities are statistically unstable and convergence time of ground thermal conductivity over test period shows trends responding the length of test period. This evaluation study will be helpful to provide some effective procedure for the thermal parameter estimation and to complement current TRT standard procedure.
MANET 라우팅 기능에 혼란을 초래하여 네트워크 전송기능을 저하시키는 악성공격에 대한 대응수단으로 IDS가 사용된다. 본 논문에서는 전송패킷의 일부를 공격대상으로 하는 그레이홀 공격이 있는 MANET에서 IDS가 전송성능에 미치는 영향을 분석하고, 그레이홀 공격에 대한 효과적인 IDS 조건을 살펴본다. 성능분석은 NS-2를 기반으로 하는 컴퓨터 시뮬레이션을 사용하며, VoIP를 응용서비스로 하여 전송성능을 측정한다. 음성전송의 표준전송품질척도인 MOS, CCR, 종단간지연 등을 성능측정 및 분석 파라미터로 사용한다.
국내외적으로 지구 온난화와 에너지 절약에 관한 관심이 커지고 있는 가운데 아스팔트관련 산업에서도 이러한 친환경 소재 및 기술 개발에 관심을 가지고 있다. 기존 가열 아스팔트에 비해 낮은 온도에서 생산할 수 있는 기술인 중온 아스팔트는 이러한 친환경 소재관련 기술 개발의 결과로서 지속적인 개발연구의 대상이 된다. 이러한 연구대상중의 하나는 중온 아스팔트 바인더의 접착능력을 측정하는 것이다. 그리고 또한 이러한 접착능력 평가와 아스팔트 혼합물 성능을 직접 연결하는 노력도 필요하다. 본 논문은 중온 아스팔트 바인더와 골재의 접착능력에 관한 내용을 다루고 있고, 그 접착능력을 평가하기 위한 시험방법을 제시하고 있다. 본 연구에서는 기존 DSR 수분손상시험을 사용해 가열 및 중온 아스팔트 바인더와 골재사이 접착부분의 물성을 비교 평가했고, 또한 아스팔트 혼합물 성능과의 관계성을 구하기 위해 인장강도 비를 측정해서 확인해 보았다. 본 연구를 통해서 나온 결론은 다음과 같다. 기존의 수퍼페이브 표준 아스팔트 바인더 시험법에서 사용하는 선형점탄성 $G^*$ 값보다는 85% 선형점탄성 $G^*$에서의 전단응력 값이 가열 아스팔트 바인더 또는 중온 아스팔트 바인더와 골재의 접착성을 좀 더 적확하게 평가하기 위한 물성 값이 될 수 있다. 그리고 얇은 아스팔트 피막두께의 접착능력을 평가하는 것이 실재 아스팔트 바인더와 골재의 접착능력을 좀 더 잘 반영할 수 있는 방법이 될 것이다.
아스팔트 혼합물의 균열 저항성은 일반적으로 인장 강도, 스티프니스와 같은 단일 물성치를 측정함으로써 평가된다. 그러나, 아스팔트 혼합물의 균열 성능을 평가함에 있어서 단일 물성치의 이용은 의문시되어 왔다. 따라서 본 연구에서는 아스팔트 혼합물의 균열 저항성과 관련이 있는 주요 특성치를 좀 더 심도 있게 규명하고자 하였다. 이를 위해 다양한 하중 조건 하에서 파괴 시험 크리프 시험, 강도 시험이 일반 아스팔트 혼합물과 개질 아스팔트 혼합물에 대해서 수행되었다. 시험 결과, 혼합물의 균열 저항성은 주로 미세 손상 축적 속도에 영향을 받음을 알 수 있었으며, 이 값은 파괴 에너지 한계에 영향을 주지 않으면서 m값에 반영됨을 알 수 있었다. 또한, 짧은 하중 재하 시간 (탄성거동) 동안 얻어지는 스티프니스는 혼합물의 균열 저항성의 차이를 규명하는데 한계가 있음을 알 수 있었다. 따라서 아스팔트 혼합물의 균열 저항성을 보다 명확히 평가하기 위해서는 혼합물의 크리프 거동과 파괴 한계점을 동시에 고려하는 것이 필수적임을 알 수 있었다. 또한 수퍼페이브 간접 인장 강도 시험으로부터 구한 잔여 소멸 에너지는 비교적 손쉬운 실험을 통해 아스팔트 혼합물의 균열 저항성의 상대적인 차이를 보여줄 수 있는 유용한 물성치임을 알 수 있었으며, 장기 크리프 시험에서 얻어지는 파괴 변형률은 아스팔트 혼합물의 크리프 거동과 파괴 한계점을 동시에 고려함으로써 균열 저항성을 평가할 수 있는 유용한 물성치 임을 알 수 있었다.
This study was carried out to evaluate the performance of a medium scale rice polisher of 2.5 t/h and to improve its performance for producing the clean rice with high quality. The maximum internal pressure, broken rice ratio. whiteness in the rice polisher were investigated, and the effects of outlet resistance, water spraying rate, shaft revolution speed and rice moisture content on the polishing performance were analyzed to find out proper operating conditions. The conclusions of this study were as follows: 1. In the performance evaluation of the polisher, the broken rice ratio increment of 0.1%, the max. internal pressure of about 11 N/${cm}^2$, and whiteness increment of 2.2~3.7 resulted at the conditions of 20 PS driving power, 950 rpm, 150 cc/min water spraying rate, 44.1 Nㆍcm outlet resistance and about 15% rice moisture content. 2. Though max. internal pressure and whiteness at the 17% rice moisture content were higher than those at the 15% moisture content under the same operating conditions of the polisher, but the broken rice rate at the 17% moisture content was absolutely low compared with that at 15% moisture content. The water spraying effect to reduce broken rice and to increase whiteness was much significant at the 15% moisture content not significant at 17% moisture content. 3. The main parameter of the performance was outlet resistance, and low resistance of about 44.1 Nㆍcm was recommended at the polisher. 4. The proper water spraying rate in the polisher was about 150 cc/min. 5. As the shaft revolution speed decreased from 950 rpm and 800 rpm to 650 rpm, the broken rice ratio increased and whiteness decreased. 6. As the driving power of the polisher increased from 20 PS to 30 PS, the max. internal pressure decreased by about 1~2.5 N/${cm}^2$ and whiteness increased by about 1~2, but the broken rice rate was not changed. 7. The proper operating conditions of the polisher seemed to be the revolution speed of 800-950 rpm, the water spraying rate of about 150 cc/min, the oulet resistance of about 44.1 N.cm and 30 PS driving power.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.