• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.9-18
• /
• 2014

This paper proposes the fuzzy PI controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, this paper proposes the MPPT control using the fuzzy PI controller that can be improve a MPPT control performance. The fuzzy PI controller is adjusted a input of PI controller by fuzzy control and compensated a cumulative error of fuzzy control by PI controller. The fuzzy PI MPPT control is compared to conventional PO and IC MPPT method for various temperature and radiation condition. This paper proves the validity of the fuzzy PI controller using these results.

• 한국주거학회논문집
• /
• 제7권1호
• /
• pp.105-116
• /
• 1996

The purpose of this study is to improve the quality of the light environment of classroom. To attain this purpose, this study estimated the physical factor and evaluation of the subjective response of classroon located in south and north in the summer and the winter. The results are as followed. 1. The evaluation of the illumination, uniformity factor, daylight factor as physical factor of light environment is good as classroom, but the classroom in south is better that that in north, the light environment in summer is better than winter. 2. The subjective response to light environment of classroom is positive on both seasons at all calssroom. Comparing summer with winter, I found that the difference of subjective response between both classrooms on summer is attentive. 3. The realtion between subjective response and physical factor of light environment in classroom is attentive on the light sense, content sense, uniformity.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.136-141
• /
• 2011

The lightshelf system reduces intense illumination levels of indoor from direct sun light and reflect to lead diffused light into indoor deeply. This study aims to design acurved-lightshelf by a ray tracing method and evaluate the daylighting performance of window integrated with the curved-lightshelf by computer simulations. For this purpose, evaluation test model was designed for the experiments to validate the simulation model, and the curved-lightshelf was designed by the ray tracing method using Ecotect. After the office model was designed using 3D simulation, the average indoor illuminance, luminance and distribution of illuminance were evaluated by simulation which has a algorithm of Radiosity and Ray-Tracing method under four different cases(case1;no lightshelf, case2; Flat board, case3; tilted at $30^{\circ}$ angle, case4; the curved-lightshelf). As results, it turns out that case1 showed higher average illuminance and case4 was more uniformly distributed than case2 and case3, In addition average luminance of case1 was also lower. indicating that the curved-lightshelf would reduce the possibility of the glare, while maintaining the sufficient daylight level.

• KIEAE Journal
• /
• 제4권4호
• /
• pp.45-52
• /
• 2004

Simulation of daylighting by computer program is a method to avoid unnecessary efforts in manufacture of its testing models, to reduce its measuring tolerances and be able to provide variations of various weather conditions as well. Many simulation programs on daylighting have been released freely or commercialized for selling, however, a demonstration of their availability and validity as a tool for evaluating daylighting performance is required since each one has its own characteristics. The objectives of this study lie in suggesting an application method of evaluation tools and demonstration of limits and characteristics so as to more easily determine the daylightingperformance in the very initial stages of planning for an arbitrary office space in which windows with daylight access are built. We produced scale model of the general light inducing type side lighting with lightshelfand ceiling, and the luminance (at 78 measuring points) and illuminance (at 84 measuring points) were measured in a clear sky. And a comparison of the measured values and the calculated values from a computer simulation using the Lightscape program was performed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2008

According to the conversion of building into skyscraper, most buildings have curtain wall structures, so the shading device of building is required. The types of shading systems are a roller shade, venetian bind, and vatical blind and so on. A miler shade is mostly used among the shading systems. An experimental evaluation was verified whether there was an effect of shading materials(Perforated panel, Fabric) in each condition by an experiment with artificial lighting and daylight.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.9-16
• /
• 2005

본 연구는 건축조명환경의 광학적 특성에 따라 변화하는 인간의 감성반응을 측정$\cdot$평가하여 조명광원에 대한 감성 데이터 확보에 목적이 있으며, 실제 건축공간에서 활용되는 조명광원을 광학적 특성에 따라 선정한 다음, 조명광원별 감성반응을 측정하여 분석하였다. 연구의 결과를 요약하면, 1) 시기능의 명시성에 있어서 주광색 형광램프가 가장 작업수행도가 높은 것으로 나타났다. 2) 시기능의 피로$\cdot$스트레스에 있어서는, 메탈할라이드 램프와 수은 램프가 부정적인 영향을 주고 있는 것으로 나타났다. 3) 빛의 쾌적성 항목 중 $\ulcorner$밝기가 적당한$\lrcorner$, $\ulcorner$햇빛색에 가까워 보이는$\lrcorner$ 어휘에서는 색온도가 높은 주광색 형광램프가 높은 평가를 받고 있는 것으로 나타났으며, $\ulcorner$눈부심이 있는$\lrcorner$ 어휘에서는 메탈할라이드 램프와 수은 램프가 낮은 평가를 받았다. 4)요인분석 실시 결과, $\ulcorner$촬동성$\lrcorner$, $\ulcorner$역량성$\lrcorner$, $\ulcorner$평가성$\lrcorner$의 3개의 평가축이 추출되었으며, 실내조명공간의 분위기 평가에 있어서 $\ulcorner$활동성$\lrcorner$이 미치는 영향력이 가장 큰 것으로 나타났다. 5) 각 조명광원별 분위기 평가에 미치는 영향에 대해서, $\ulcorner$활동성$\lrcorner$축은 메탈할라이드 램프와 주광색 형광램프, $\ulcorner$역량성$\lrcorner$축은 백열램프류, $\ulcorner$평가성$\lrcorner$축은 주로 색온도가 낮은 형광램프에 의한 영향을 많이 받는 것으로 나타났다.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.424-433
• /
• 2014

The purpose of this study is to evaluate the effectiveness in the lighting performance of mixed type light-shelf, by comparing and analyzing the internal light-shelf, external light-shelf, and mixed-type light-shelf. The performance of light-shelf was evaluated according to the angle of light-shelf at summer solstice, winter solstice, vernal equinox, and autumn equinox. The comparative analysis between the internal light-shelf, external light-shelf, and mixed-type light-shelf was carried out using the performance evaluation and analysis method. The result of performance evaluation is shown as follows. The mixed type light-shelf showed the highest lighting performance all at summer solstice, winter solstice, vernal equinox, and autumn equinox, followed by the external light-shelf and the internal light-shelf in the same order. The mixed type light-shelf was the most favorable for bringing daylight to indoors by adjusting the angle of light-shelf, and it also showed the highest lighting performance in terms of uniformity ratio of illumination which indicates the quality of light.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.103-110
• /
• 2011

The aim of this study was to analysis the Heating/cooling performance and Daylighting performance of Solar Window System built in apartments. the solar window is the idea to integrate daylight as a third form of solar energy into a PV/Solar Collector system. The process of this study is as follows: 1)Solar Window system was designed through the investigation of previous paper and work. 2)The simulation program(Lightscape3.2) was used in daylighting performance analysis. the reference model of simulation was made up to analysis daylighting performance on Solar Window system. 3)The simulation program(ESP-r, Therm5.0, Window6.0) was used in energy performance analysis. the reference model of simulation was made up to analysis energy and daylighting performance on Solar Window system. 4)The Size of Simulation model for daylighting and heating/cooling energy analysis was $148.5m^2$ 5)The lighting performance analysis was carried out with various variants, such as the size and installed area of Solar Window system. 6)Energy performance simulation was carried out with various variants, such as Integrated U-value of Solar Window system according to its position, installed angle and insulation thickness. Consequently, When Solar Window system is equipped with balcony window of Apartment, Annual heating and cooling energy of reference model was cut down at the average of $4.1kWh/m^2$ or 4.2%.

• 한국환경과학회지
• /
• 제27권11호
• /
• pp.967-974
• /
• 2018

In this study, we evaluated the photocatalytic oxidation efficiency of aromatic volatile hydrocarbons by using $WO_3$-doped $TiO_2$ nanotubes (WTNTs) under visible-light irradiation. One-dimensional WTNTs were synthesized by ultrasonic-assisted hydrothermal method and impregnation. XRD analysis revealed successful incorporation of $WO_3$ into $TiO_2$ nanotube (TNT) structures. UV-Vis spectra exhibited that the synthesized WTNT samples can be activated under visible light irradiation. FE-SEM and TEM images showed the one-dimensional structure of the prepared TNTs and WTNTs. The photocatalytic oxidation efficiencies of toluene, ethylbenzene, and o-xylene were higher using WTNT samples than undoped TNT. These results were explained based on the charge separation ability, adsorption capability, and light absorption of the sample photocatalysts. Among the different light sources, light-emitting-diodes (LEDs) are more highly energy-efficient than 8-W daylight used for the photocatalytic oxidation of toluene, ethylbenzene, and o-xylene, though the photocatalytic oxidation efficiency is higher for 8-W daylight.