• 한국농공학회논문집
• /
• 제56권4호
• /
• pp.9-19
• /
• 2014

The objective of this study was to evaluate of the Tank model in simulating runoff discharge from rural watershed in comparison to the SWAT (Soil and Water Assessment Tool) model. The model parameters of SWAT was calibrated by the shuffled complex evolution-university Arizona (SCE-UA) method while Tank model was calibrated by genetic algorithm (GA) and validated. Four dam watersheds were selected as the study areas. Hydrological data of the Water Management Information System (WAMIS) and geological data were used as an input data for the model simulation. Runoff data were used for the model calibration and validation. The determination coefficient ($R^2$), root mean square error (RMSE), Nash-Sutcliffe efficiency index (NSE) were used to evaluate the model performances. The result indicated that both SWAT model and Tank model simulated runoff reasonably during calibration and validation period. For annual runoff, the Tank model tended to overestimate, especially for small runoff (< 0.2 mm) whereas SWAT model underestimate runoff as compared to observed data. The statistics indicated that the Tank model simulated runoff more accurately than the SWAT model. Therefore the Tank model could be a good tool for runoff simulation considering its ease of use.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.787-796
• /
• 1995

A man model is a useful design tool for the evaluation of man machine systems and products. An arm reach trajectory prediction for such a model will be specifically useful to present human activities and, consequently, could increase the accuracy and reality of the evaluation. In this study, a three-dimensional reach trajectory prediction model was developed using an inverse kinematics technique. The upper body was modeled as a four link open kinematic chain with seven degrees of freedom. The Resolved Motion Method used for the robot kinematics problem was used to predict the joint movements. The cost function of the perceived discomfort developed using the central composite design was also used as a performance function. This model predicts the posture by moving the joints to minimize the discomfort on the constraint of the end effector velocity directed to a target point. The results of the pairwise t-test showed that all the joint coordinates except the shoulder joint's showed statistically no differences at .alpha. = 0.01. The reach trajectory prediction model developed in this study was found to accurately simulate human arm reach trajectory and the model will help understand the human arm reach movement.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.19-25
• /
• 2019

We have developed a tool that uses finite element analysis (FEA) to rapidly evaluate a shaft-bearing system of machine tools. We extracted commercial data on suitable clamping units and defined the inner profile of the shaft to avoid needing direct user input to define the profile. We use a splitting algorithm to convert the shaft into beam elements with two diameters and length. To validate the tool, we used it to design and evaluate a shaft-bearing system and found that our tool automated the construction of an FE system model in a commercial FEA package as well as the static stiffness evaluation; both tasks were completed in seconds, demonstrating a significant reduction from the minutes normally required to complete these tasks manually.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.69-81
• /
• 1995

Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for the analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$^{TM}$, Virtual technologies) with eighteem joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented inte- grating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an efficient and cost-effective solution to task analysis of manual tool handling tasks.s.

• Journal of Preventive Medicine and Public Health
• /
• 제56권4호
• /
• pp.384-387
• /
• 2023

The aim of this study was to present a framework for clinicians to use when discussing electronic cigarette (e-cigarette) use and its association with pre-diabetes. A communication tool was designed using evidence-based strategies from the academic literature. A four-step framework is presented, which includes: step (1) helping patients to understand the association between e-cigarette use and pre-diabetes; step (2) the synergistic health impacts of e-cigarette use and pre-diabetes; step (3) management of diabetes-related lifestyle factors; and step (4) stages of change assessment related to e-cigarette reduction. This communication tool provides support for clinicians to discuss the risk of pre-diabetes associated with e-cigarette use. Moving forward, implementation and evaluation of this model are needed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.11-18
• /
• 1998

In grinding operations, one of the most important problems is to increase efficiency of process. In order to achive this purpose, it is necessary to administer the tool life of grinding wheel and to optimize grinding conditions. Frequently dressing result in lowering the process efficiency remarkably and makes production cost high. On the other hand, grinding with a worn wheel causes the workpiece surface roughness to increase and often results in the occurrence of such troubles as chatter vibration and burning.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.167-175
• /
• 1994

Generally, queueing networks, networks, chains and simulation techniques are among the most widely used evaluation tools to study computer systems, manufacturing systems etc. But, these tools have some assumptions and difficulties. So, this thesis presents a method for manufacturing system using Petri nets. Petri nets are a graphical and mathmatical modeling tool and are promising tool for describing and studying systems that are characterized as being concurrent asychronous, dynamic, distributed and parrallel. It designs Petri net model for processing time of manufacturing system And it applied to a job shop system composed of 8 machines and 4 different job types.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.35-52
• /
• 2017

In order to evaluate the grouting effects of water-rich fault in tunnels systematically, a feasible and scientific method is introduced based on the extension theory. First, eight main influencing factors are chosen as evaluation indexes by analyzing the changes of permeability, mechanical properties and deformation of surrounding rocks. The model of evaluating grouting effects based on the extension theory is established following this. According to four quality grades of grouting effects, normalization of evaluation indexes is carried out, aiming to meet the requirement of extension theory on data format. The index weight is allocated by adopting the entropy method. Finally, the model is applied to the grouting effects evaluation in water-rich fault F4-4 of Qingdao Jiaozhou Bay Subsea Tunnel, China. The evaluation results are in good agreement with the test results on the site, which shows that the evaluation model is feasible in this field, providing a powerful tool for systematically evaluating the grouting effects of water-rich fault in tunnels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2646-2648
• /
• 2002

This paper deals with a comparative evaluation of the reliability of control rod drive mechanisms including their driving methods for nuclear power plants. Basically there exist two types of electromagnetic-jack-type drive mechanisms in commercial use that are called as Control Rod Drive Mechanism and Control Element Drive Mechanism. Each type has corresponding drive sequence to make the movements of insertion and withdrawal. A state-space model is derived for each model graphically. Then the evaluation of the reliability is carried out on the programming tool called SHARPE. The evaluation does not give any meaningful numerical values for the reliability but just shows a relative degree to each other in view of reliability.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.102-113
• /
• 2010

In this research, we proposed a quality evaluation standard model which is suitable for the internet shopping mall based on the Malcolm Baldrige National Quality Award model. A 7-Point Likert Scale was used based on the seven categories within the 2008 Malcolm Baldrige Criteria : Leadership, Strategic Planning, Customer and Market Focus, Measurement Analysis and Knowledge Management, Workforce Focus, Process Management, and Result. Furthermore, we analysed the validity and causal relationship among the factors within the model. The goal of this research is to find a rational standard to evaluate internet shopping malls nationwide and help the structuring and the operation of these malls. The results may be used not only as a tool to evaluate internet shopping mall sites but also as a guideline to improve the quality of a internet shopping mall site that is under development.