• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.425-434
• /
• 2010

This study presents the alternative evaluation technique for the high-rise building structural system. The alternative evaluation of the structural system is performed in three steps, that is, preliminary evaluation, main evaluation and detailed evaluation. The evaluation categories are composed of structural performance, economic feasibility and term of work. Each categories are composed of detailed items to evaluate of its own. In preliminary evaluation, qualitative evaluation based on experimental knowledge is performed. In main and detailed evaluations, quantitative evaluations based on numeric data are performed. The weighted-sum method is applied to integrate the evaluated results of each items and its importance. The applicability of the proposed method was verified by applying it to the practical buildings and simulate the procedures.

• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.207-214
• /
• 1976

Operations for cardiac valvular disease has been progressed in various ways. Since 1949 when Lord Russel operated mitral stenosis by closed technique at Johns Hopkins Hospital then much progress has been achieved and that nowadays severely diseased cardiac valve has been replaced by prosthetic valve, which is almost ideal in hemodynamic aspect, but still it has many problems such as thromboembolism, destruction of red blood cell, pressure gradient, and disturbance of left ventricular function, so in case of delicate situations, valve replacement should be decided carefully. Besides prosthetic valve, there are some kinds of reconstructive procedures and these have been resulted in better prognosis than prosthetic valve replacement in selected cases. So, authors have reviewed 61 Cases of cardiac patients who have been operated reconstructive valvular surgery by cardiopulmonary bypass, at Yonsei University, from Jan. 1963 to Mar. 1976. Out of 61 cases, 9 patients were replaced by prosthetic valve and rest of the patients were operated upon in various reconstructive procedures such as commissurotomy, valvotomy, valvuloplasty, and annuloplasty. Twenty cases of congenital heart diseases with valvular lesion, which had been operated for valvular lesion were also included in this statistics. Out of 9 cases of prosthetic valvular replacement five cases of prosthetic valvular replacement was done combined with other reconstructive procedures after attempted valvuloplasty. Comparative prognosis of both procedures are somewhat variable by reporters, average 19% of mortality after reconstructive surgery and 38% of mortality after prosthetic valve replacement in long term results. Most common cause of death in postoperative period was low output syndrome in both cases. It seems that good preoperative evaluation and proper reconstructive surgery will afford good prognosis in selected cardiac valvular diseased patient.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.1
• /
• pp.28-39
• /
• 2007

The purpose of this study is to evaluate the regenerative capacity of reconstruction in the atrophied posterior maxilla by comparing bone graft procedures and alveolar distraction osteogenesis (ADO) techniques. We performed the autogenous iliac bone graft (AGB group, 5 specimens in 3 patients), and the combination (Mixed group, 3 specimens in 3 patients) of the autogenous and deproteinized bovine bone ($Bio-Oss^{(R)}$, Geistlich Co., Switzerland) as the ratio of 2:1 in the sinus floor elevation procedures. ADO procedures using $TRACK^{(R)}$ (KLS Martin Co., Germany) were also performed to augment vertical alveolar height in atrophied posterior maxilla (ADO group, 5 specimens in 4 patients). Newly generated bone tissues were obtained with the 2.0mm diameter trephine bur (3i Co., USA) during implant fixture installation after 5-7 months. Routine histolomorphological observation, immunodot blot assay for quantitative evaluation, and immunohistochemical staining with antibodies to MMP-1, -9, -10, TIMP-1, -2, and BMP-2, -4 were all carried out. Lamellar bone formation was well shown in all specimens and new bone formations of ADO group increased than those of other procedures. In immunohistochemical staining, the strong expression of BMP-2 was shown in all specimens, and immunodot blot assay showed that bone formation is accompanied by the good induction of factors associated with angiogenesis and appeared more increased amount of osteogenic and angiogenic factors in ADO group. ADO is the most effective technique for new bone formation compared to sinus floor elevation with autogenous or mixed bone graft in the atrophied posterior maxilla. In the quantitative immunodot blot assay, the regenerated bone after ADO showed more increased products of VEGF, BMP-2, PCNA and MMP-1 than those after the other procedures, and these findings were able to be confirmed by immunohistochemical stainings.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.52-59
• /
• 2015

The aim of the paper is to introduce the statistical definition of the specified compressive strength of the concrete to be used for safety evaluation of the existing structure in domestic practice and to present the practical method to obtain the specified strength by utilizing the non-destructive test data as well as the limited number of core test data. The statistical definition of the specified compressive strength of concrete in the design codes is reviewed and the consistent formulations to statistically estimate the specified strength for assessment are described. In order to prevent estimating an unrealistically small value of the specified strength due to limited number of data, it is proposed that the information from the non-destructive test data is combined to that of the minimum core test data. The the sample mean, standard deviation and total number of concrete test are obtained from combined test data. The proposed procedures are applied to an example test data composed of the artificial numerical values and the actual evaluation data collected from the bridge assessment reports. The calculation results show that the proposed statistical estimation procedures yield reasonable values of the specified strength for assessment by applying the non-destructive test data in addition to the limited number of core test data.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.397-400
• /
• 2004

Synthetic Aperture Radar(SAR) is an active micro­wave instrument that performs high-resolution observation under almost all weather conditions. Although there are many advantages of SAR instrument, many complicated steps are involved in order to generate SAR image products. Many research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. However, it is hard to find research which compare the quality of SAR products generated with different algorithms and processing methods. In our previous research, a SAR processing s/w was developed for a ground station. In addition, quality assessment procedures and their test parameters inside a SAR processor was proposed. The purpose of this paper is to evaluate the quality of SAR images generated from the developed SAR processing s/w. However, If there are no direct measurements such as radar reflector or scattering field measurement values it is difficult to compare SAR images generated with different methods. An alternative procedures and parameters for SAR image quality evaluation are presented and the problems involved in the comparison methods are discussed. Experiments based on real data have been conducted to evaluate and analyze quality of SAR images.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.162-169
• /
• 2003

Excavation by TBM can be characterized by a rock-machine interaction during the cutting process on a small scale, but on a large scale the interaction between the rock mass and TBM becomes very significant. For the planning and evaluation of TBM tunnelling it needs to understand rock fracture mechanism by a cutter or cutters on a small scale, and to estimate penetration rate, advance rate and utilization on a large scale. In this study rock chipping mechanism due to cutter-penetration is analysed by numerical simulation, showing that rock chipping is mainly occurred by tensile failure. Also, through the analysis of factors that affect on TBM procedures in various assessment systems, it is determined that the key elements that should be considered in the planning and evaluation of TBM tunnelling are classified into rock properties, the geological structures and properties of rock mass, and the structural and functional specifications of the machine. The user-friendly assessment tool is developed, so that penetration rate, advance rate and TBM utilization are evaluated from various input data. The tool developed in this study can be applied to a practical TBM tunnelling by understanding TBM tunnelling procedures.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.271-277
• /
• 1985

With modification of the acid etch technique and improvements of the physical and mechanical properties of the acrylic resin, the removal of directly bonded attachments and the finishing of the underlying enamel have become an acute clinical problem. This study was to evaluation the efficacy of recently introduced instrumentation and techniques to remove bonded brackets and residual resin, and restore the affected enamel surface to an acceptable clinical condition. Fortyeight premolar which were scheduled for extraction for orthodontic purposes were bonded with brackets using super-C ortho. Four additional premolars with untreated surfaces were used as controls. After one weak the brackets were removed and the residual resin removed by hand scaler, green stone, green rubber wheel, sandpaper disc, tungsten carbide bur, Sof-lex disc. Half the experimental teeth were given a final pumicing and then all were extracted and stored in 50 percent ethanol. The scanning electron microscopy was used to evaluated the enamel surface. Following results were obtained; 1. A satisfactory result was obtained by means of the Sof-lex disc. 2. The order of the scratch formation was the procedure using hand scaler, green atone, tungsten carbide bur, sandpaper disc, green rubber wheel, and Sof-lex disc. 3. The procedures using green stone and tungsten carbide bur showed many groove formations and the other procedures showed none. 4. final pumicing serves effectively to remove residual adhesive and restore the enamel surface.

• Journal of the Korean Home Economics Association
• /
• v.40 no.7
• /
• pp.69-82
• /
• 2002

The objective of this study was to develop a Web based learning environment for Home Economics Education(HEE) using ICT (Information & Communication Technology). For the study, the following procedures were performed: 1) the review of literature, 2) development of teaming environment and questionnaires based on Web for HEE using ICT. The Web based learning environment was investigated and designed, and evaluated by the users. The problems indicated through the evaluation were revised and complemented. In addition, 13 sets of Learning questionnaires, which were verified using the same procedure as above, were developed to provide problem solving ability through the Web based learning environment. Learning environment based on the Web entitled "Together with the classroom of HEE" has a main menu, which is composed of rooms for HEE, students, teachers, various topics, recommendation sites, chatting, and e-mail. A room for HEE, in which teaming activity mainly occurs by following the sequences of learning procedures, includes other sub-rooms for the guidance of Loaming, discussion, directories for reference, question and answer, submission of homework, evaluation, and an encyclopedia. Therefore, this study implicates: 1) achievement of teaming environment using the ICT mainly made by students who solve problems closely related to daily life, 2) development of practical learning questionnaires fitted in the present state, 3) preparation for the curriculum. Finally, from this study, I suggested that further studies are needed to develop models for learning, interaction between students and teachers, and the learning materials under the Web based loaming environment.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.352-373
• /
• 2003

Rhamnose-rich (RROP-s) and fucose-rich (FROP-s) oligo-and polysaccharides were prepared and extensively characterised by physical and chemical procedures [1,2] and compared to L-fucose. Their biological properties were then studied on human skin fibroblast cell cultures, human skin explant cultures and on hairless rat skin, using a variety of cell-biological, biochemical and computerised morphometrical procedures. Among the most important properties we could establish, the following are of particular interest for the tretment and prevention of age-dependent modifications of human skin (loss of skin-tissue, cells and matrix, wrinkle formation and others) : stimulation of cell proliferation (by $^3$[H]-thymidine incorporation and the MTT test), scavenging of reactive oxygen species (ROS) using several different procedures, and protease (MMP-2 and MMP-9) down-regulation. A topical preparation, using RROP-s and FROP-s, and/or L-fucose, was shown to increase cell proliferation, dermal matrix synthesis, efficient scavenging of ROS-s and to increase also the thickness of dermal tissue when applied for 4 weeks on hairless rat skin, accompanied by the densification of collagen bundles as well as by an increase of elastin synthesis. Using fluorescent labeled FROPs, it could be shown that these oligosaccharides react with cell-membrane receptors and especially with the elastin-laminin-receptor and the fucose-mannose receptor, but they penetrate also in the cell nucleus, suggesting the possibility of a direct action on the regulation of gene expression. When applied to the human skin of a team of voluntary women encompassing all age-groups, the efficiency of FROP-containing preparation could be confirmed using indentometry and computerised evaluation of skin micro-relief, as well as evaluation of periorbital wrinkles. It appears therefore that these preparations correspond to all the requirements of active anti-aging principles.