• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.127-139
• /
• 2000

In the study, an expert system was developed to predict the safety of tunnel and select proper tunnel reinforcement system using fuzzy quantification theory and fuzzy inference rule based on tunnel information database, For this development, many tunnelling sites were investigated and the applied countermeasures were studied after building tunnel database. There will be benefit for the deciding tunnel reinforcement method in the case of poor ground condition. The expert system developed in the study has two main parts, pre-module and post-module. Pre-module is used to decide input items of tunnel information based on the tunnel face mapping information which can be easily obtained in in-situ site. Then, using fuzzy quantification theory II, fuzzy membership function is composed and tunnel safety level is inferred through this membership function. Post-module is used to infer the applicability of each reinforcement methods according to the face level. The result of the predicted reinforcement system level was similar to measured ones. In-situ data were obtained in three tunnel sites including subway tunnel under Han River. Therefore, this system will be helpful to make the mose of in-situ data available and suggest proper applicability of tunnel reinforcement system to development more resonable tunnel support method without dependance of some experienced experts opinions.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.9-18
• /
• 1997

In this paper, we implemented the communication module in the Telephone Network Access Subsystem(TNAS) of the Advanced Communications Processing System(ACPS). We defined some kinds of communication tasks and related resources like several queues which are executed in real-time operating system, and implemented the procedures for processing the user information. Through traffic modeling and simulation, the performance of the Service Processing board Assembly(SPA) is evaluated in the aspets of system utilization and buffer size. The ACPS should accommodate various public networks such as public switch telephone network, packet switchen data network, frame realy netork, and ATM network. The communications module proposed in this paper could be used inthe interface beween the SPA and the High Speed Network Adaptor of other network interface subsystems.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.56.2-56.2
• /
• 2018

Ronchi test is an optical test to check the quality of an imaging system. Wavefront of the optical system can be obtained from the Ronchi patterns. In this poster, we present the Ronchi test module and the optical quality evaluation results. The test module consists of a light source, a pinhole, a beam splitter, a Ronchi ruling and a flat mirror. The test module can be simply adapted to any optical systems. We compare measured surface data for both aluminum and glass parabolic mirrors by analyzing the Ronchi patterns.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.111-128
• /
• 2007

The purpose of the research is to analyze the status and problems of the e-Learning quality assurance system on e-Learning contents and service provider(institutes) in the field of enterprise education. In addition, the research is to suggest the direction and strategies for revising and developing the system. The research put emphasis on two systems of the e-Learning quality assurance(contents, service provider) which directly influence financial support of government. This study depended mostly on literature review, supplemented by expert panel meetings. In the case of the quality assurance system on e-Learning contents, the followings are suggested; (1)admitting the contents made of the combination of modules in the approved module set, (2)making easier the qualifying of modified contents for maintenance, (3)revising evaluation criteria, (4)providing substantial feedback. In the field of service provider, the followings are requested; (1)differentiating of qualifying system by industry and scale of company, (2)extending the qualifying cycle, (3)improving the feedback and sharing system.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.21-27
• /
• 2018

The expansion and stable operation of electric power facilities are important factors with development of industrial facilities in modern society. In high-voltage equipment such as GIS, the insulation characteristics may be deterioated by environment-friendly gas adaption and miniaturization. There is also the possibility of accidents due to insulation breakdown due to the deterioration of power facilities. Therefore, it is necessary to extend the diagnosis system to continuously monitor the danger signals of these power equipment and to prevent accidents. Most of the internal defects in the GIS system are conductive particles, floating electrode defects, protrusion defects, and the like. In this case, a partial discharge phenomenon is accompanied. These partial discharge signals occur irregularly and various noise signals are included in the field, so it is difficult to evaluate the reliability in the development of the diagnostic system. In this paper, a study was made on equipment capable of generating a partial discharge simulated signal that can be adjusted in size and frequency to be applied to a diagnostic device by electromagnetic wave detection method. The PD simulated pulse generator consists of a user interface module, a high-voltage charging module, a pulse forming circuit, a voltage sensor and an embedded controller. In order to simulate the partial discharge phenomenon similar to the actual GIS, a discharge cell was designed and fabricated. The application of the prototype pulse generator to the commercialized PD diagnosis module confirmed that it can be used to evaluate the performance of the diagnostic device. It can be used for the development of GIS diagnosis system and performance verification for reliability evaluation.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.2
• /
• pp.74-91
• /
• 2023

This study provides an in-depth comparison and analysis of various risk assessment models widely used in modern industries, and proposes the most suitable model for risk assessment of offshore wind power in Korea. The assessment models were selected by considering various factors such as the purpose of risk assessment, stakeholder requirements, and characteristics of offshore wind power. We also emphasized the importance of using different risk assessment models in combination in situations of high uncertainty. To systematize the combination of risk assessment models, we used systems engineering which is effective to develop a new system. Systems engineering was used to define the complete, traceable functions from site requirements, and model-based systems engineering was used to manage the design information from requirements to detailed functions in a single model. The developed risk assessment module provide automatic conversion between risk assessment models to enable risk assessment suitable for offshore wind power. The functionality and usability of the offshore wind risk assessment module were verified by the evaluation of three wind power experts.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.1
• /
• pp.57-67
• /
• 2016

As a new technical approach, an attempt was made to realize a photovoltaic system for an eco-environmental leisure ship by simultaneously actuating nine photovoltaic solar panels in association with the application of a sail-controlling system using wind energy. In this approach, the photovoltaic system consisted of a solar module, an inverter, a battery, and the relevant components, while the sail-controlling device was equipped with sail up/down and mast turning systems. The previously mentioned eco-environmental leisure ship utilizes a photovoltaic hybrid system that uses solar and wind energy as renewable energy sources. Furthermore, this research included a performance evaluation of the manufactured prototype, the acquisition of the purposed quantity values, and development of the purposed items. The significant items, including the sail up/down speed (seconds) and mast turning angle (degrees) were evaluated for a performance test. A wind direction sensitivity of 90% and maximum instant charging power of 900 W were also obtained in the process of the performance evaluation. In addition, the maximum sail time was also evaluated in order to acquire the optimum value. The performance evaluation showed that the prototype with a photovoltaic hybrid system was suitable for sailing an eco-environmental leisure ship using solar and wind energy.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.99-106
• /
• 1998

In this paper, we have constructed an expert system for semiconductor chip encapsulation which combines a knowledge-based system with CAE software. The knowledge-base module includes heuristic and pre analysis knowledge for evaluation and redesign. Evaluation of the initial design and generation of redesign recommendations can be developed from the rules as applied to a given chip package. The CAE programs can be used for simulating the filling and packing stage of encapsulation process. The expert system is a new tool which enables package design or process conditions with high yields and high productivity.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.19-26
• /
• 2011

SATEEC ArcView GIS system was developed using the Universal Soil Loss Equation (USLE) and sediment delivery ratio (SDR) modules. In addition, time-variant R and C modules and $R_5$ module were developed and integrated into the SATEEC system in recent years. The SATEEC ArcView GIS 2.1 system is a simple-to-use system which can estimate soil erosion and sediment yield spatially and temporarily using only USLE input data, DEM, and daily rainfall dataset. In this study, the SATEEC 2.1 system was used to evaluate the effects of USLE LS input data considering slope length segmentation on soil erosion and sediment yield estimation. Use of USLE LS with slope length segmentation due to roads in the watershed, soil erosion estimation decreased by 24.70 %. However, the estimated sediment yield using SATEEC GA-SDR matched measured sediment values in both scenarios (EI values of 0.650 and EI 0.651 w/o and w/flow segmentation). This is because the SATEEC GA-SDR module estimates lower SDR in case of greater soil erosion estimation (without flow length segmentation) and greater SDR in case of lower soil erosion estimation (with flow length segmentation). This indicates that the SATEEC soil erosion need to be estimated with care for accurate estimation of SDR at a watershed scale and for accurate evaluation of BMPs in the watershed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1411-1417
• /
• 2015

The installation of PV system to the power distribution system is being increased as one of solutions for environmental pollution and energy crisis. However, the efficiency of PV system is getting decreased because of the aging phenomenon and several operation obstacles. Therefore, The technology development of aging diagnosis of PV modules are required in order to improve operation performance of PV modules. This paper proposes evaluation algorithm for aging state in PV modules by using the electrical characteristics of PV modules and environmental factors. And also, this paper presents a operation evaluation system of PV modules based on the proposed aging diagnosis algorithm of PV modules. From the simulation results of proposed evaluation system, it is confirmed that the proposed algorithm is a useful tool for aging diagnosis of PV systems.