• Composites Research
• /
• 제26권3호
• /
• pp.175-181
• /
• 2013

고속충격을 받는 복합재 적층판의 충격거동 특성 중에서 관통 후 잔류속도, 시편에 의한 충격흡수에너지 그리고 충격손상영역에 대한 평가와 예측이 중요하다. 본 논문에서는 고속충격을 받는 Carbon/Epoxy 복합재 적층판의 잔류속도와 흡수에너지를 준실험적 방법을 통하여 예측할 수 있는 방법을 제안하였다. 고속충격에 의한 시편의 흡수에너지를 정적에너지와 동적에너지로 구분하였으며 정적에너지는 보강섬유의 파손과 정적 탄성에너지와 관련 있는 준정적압입실험을 통한 관통에너지를 사용하였다. 동적에너지는 고속충격 시 시편 일부의 움직임과 관련한 운동에너지에 대하여 몇 가지 모델을 제안하여 비교하였다. 공압을 이용한 고속충격실험을 수행하고 예측 값과 비교 분석하였다. 시편의 손상영역은 C-scan을 통하여 측정하였다. 관통한계속도보다 큰 초기 속도인 경우, 정적에너지인 관통에너지 뿐 만 아니라 시편의 동적 에너지가 시편 전체 흡수에너지에 크게 기여함을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.535-546
• /
• 2010

최근 교량구조물의 증가와 더불어 차량 및 선박과 시설물 간의 충돌사고가 발생할 확률이 높아지고 있다. 특히 교량을 구성하는 상부구조와 하부구조 중에서 충돌에 의한 영향은 주로 교각 등의 하부구조가 받을 가능성이 크다. 교각에 차량 혹은 선박이 충돌하게 되면 교량 하부구조에 국부적인 손상을 유발하게 되며, 충돌사고는 훨씬 더 순간적이고 강한 물리적인 질량의 충돌을 동반할 수 있으며, 극단적인 경우 상부구조의 붕괴까지 유발할 수 있다. 그러므로 이 연구에서는 콘크리트 구조물인 교량의 교각과 같은 압축부재에 대한 설계 시 차량 등에 의한 충돌을 고려하고, 차량 충돌하중에 의한 손상지수를 정량적으로 평가하기 위해서 기존의 설계방법을 개선하고 새로운 구조물의 저항성능 평가방법을 정립하기 위하여 동적유한요소해석 프로그램인 LS-DYNA를 이용하여 교각단면, 차량의 충돌각에 따른 충격도, 축력 및 축력비, 콘크리트 강도, 주철근비와 횡방향 철근, 세장비 등을 변화시켜 케이스별 해석을 수행하였다. 이 연구 결과를 통해 콘크리트 구조물의 거동해석 및 설계기법을 Bayesian 통계방법을 이용한 만족도 곡선을 통해 충격하중을 받을 시의 성능 기반형 저항성능 평가방법을 개발하였으며, 이는 실제 충격하중에 의한 구조물의 방호성능 및 설계 시에 적절하게 적용할 수 있을 것으로 판단된다.

• 한국항해항만학회지
• /
• 제39권3호
• /
• pp.179-184
• /
• 2015

이 연구의 목적은 건전성 평가 기법을 통해 해양 구조물 중 생산 라이저의 건전성 및 안전성을 확보할 수 있도록 하는 것이다. 생산 라이저의 건전성 평가 기법을 선정하기 위해서 레벨 I, II의 비파괴 손상평가(NDE) 기법을 분류 및 검토하였다. 그리고 수치해석을 통해 검토한 기법의 손상 탐지 성능 및 적용성을 확인하였다. 그 결과 모달 변형 에너지를 이용한 손상탐지 기법이 다른 기법들에 비해 가장 손상에 대해 민감한 결과를 나타냈다. 실제 구조물에서 모니터링 시스템을 적용하는 경우 환경적, 경제적 요인들에 의해 센서 개수는 제한적이다. 센서 수의 감소함에 따른 손상탐지 성능에 대한 영향을 일련의 수치해석 과정을 통해 분석하고 그 결과를 논의하였으며, 생산 라이저의 건전성 평가에 대한 최적 센서 개수를 추천하였다.

• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.726-734
• /
• 2020

Objectives: The aim of this study was to analyze and classify the characteristics of potential damage from hazardous chemical accidents in 229 administrative units in South Korea by reflecting the social and environmental characteristics of areas where chemical accidents can occur. Methods: A number of indicators were selected through preceding studies. Factor analysis was performed on selected indicators to derive factors, and cluster analysis was performed based on the factor scores. Results: As a result of the cluster analysis, 229 administrative units were divided into three clusters, and it was confirmed that each cluster had its own characteristics. Conclusions: The first cluster, "areas at risk of accident occurrence and spread of damage" was a type with a high potential for accident damage and a high density of hazardous facilities. The second cluster, "Urban infrastructure damage hazard areas" appeared to be a cluster with high urban development characteristics. Finally, the third cluster 'Urban and environmental damage hazard areas' appeared to be a cluster with an excellent natural environment. This study went further from the qualitative discussion related to existing chemical accidents to identify and respond to accident damage by reflecting the social and environmental characteristics of the region. Distinct from the previous studies related to the causes of accidents and the response system, it is meaningful to conduct empirical research focusing on the affected areas by analyzing the possibility of accident damage in reflection of the social and environmental characteristics of the community.

• Structural Engineering and Mechanics
• /
• 제7권4호
• /
• pp.387-400
• /
• 1999

Damage detection in civil engineering structures using the change in dynamic system parameters has gained a lot of scientific interest during the last decade. By repeating a dynamic test on a structure after a certain time of use, the change in modal parameters can be used to quantify and qualify damages. To be able to use the modal parameters confidentially for damage evaluation, the effect of other parameters such as excitation type, ambient conditions,... should be considered. In this paper, the influence of excitation type on the dynamic system parameters of a highway prestressed concrete bridge is investigated. The bridge, B13, lies between the villages Vilvoorde and Melsbroek and crosses the highway E19 between Brussels and Antwerpen in Belgium. A drop weight and ambient vibration are used to excite the bridge and the response at selected points is recorded. A finite element model is constructed to support and verify the dynamic measurements. It is found that the difference between the natural frequencies measured using impact weight and ambient vibration is in general less than 1%.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.297-301
• /
• 2009

The impact of adding additional Multi-Criteria Decision Analysis (MCDA) criteria is demonstrated because current research shows MCDA for flood damage has been applied using only a few criteria but for better results the MCDA approach needs to apply more criteria for evaluating the alternatives. By adding additional criteria into MCDA, the capability to make the best alternatives more diverse and show the decision maker more differences in the scores of the alternatives to allow the decision maker to discriminate is significantly improved. The target region for a demonstration application of the methodology was the Suyoung River Basin in Korea. The 1991 Gladys flood event and five different return periods were used as a case study to demonstrate the proposed methodology of evaluation of various flood damage reduction alternatives.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.21-26
• /
• 2013

Delamination of cover concrete due to re-bar corrosion is a critical damage reducing structural safety of reinforced concrete structures. Therefore, it should be detected and evaluated to provide appropriate maintenance to recover structural integrity. Impact-echo method, which utilizes thickness vibration characteristics of delaminated concrete section, is effective for detection and evaluation of small areal size delamination. However, it may not be applicable for large areal size delamination in which flexural vibration modes are dominated. In this study, applicability of vibration mode shapes of delaminated concrete section is investigated for visualization of delamination region in concrete structures. Numerical and experimental modal tests are performed to estimate mode shapes of delaminated concrete section and linear absolute summation technique is proposed for effective visualization of delamination region based on estimated mode shapes.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.243-252
• /
• 1999

The damage caused in the processes and distributions after harvesting the fruits and vegetables is attributed to the mechanical factors such as compressive and impact forces. Compression tests of biological materials provide an objective method for determining the apparent modulus of elasticity and mechanical properties which are significant in quality evaluation and control, and them maximum allowable compressive forces for minimizing mechanical damage. This study was performed to determine the mechanical properties of apple and pear, and to investigate effect of specimen shapes on the mechanical properties of them. A computer program was developed for measuring the mechanical properties and analyzing the data obtained from the measurement. Compression tests on the sample were performed with then replications at each treatment and at 25 mm/min loading rate. Mechanical properties of the apple was generally shown the higher value than those of the pear, and it was though that data obtained form the cylindrical specimen removed from the sample was more reliable than from the specimen cut in half.

• Mycobiology
• /
• 제44권2호
• /
• pp.85-92
• /
• 2016

Mycoherbicides are exclusive biotechnology products which offer a non-chemical solution to control noxious weeds on the land as well as aquatic in systems, viz a viz saving environment from hazardous impact of synthetic chemicals. The present paper highlights the mycobiota associated with Eichhornia crassipes infesting Harike wetland area of Punjab and evaluation of their pathogenic potential for futuristic application as a mycoherbicide. Of the 20 isolates tested by leaf detached assay and whole plant bioassays, only one isolate (#8 BJSSL) caused 100% damage to E. crassipes. Further, the culture filtrate of this isolate also exhibited a similar damage to the leaves in an in vitro detached leaf assay. The potential isolate was identified as Phaeoacremonium italicum using classical and modern molecular methods. This is the first report of P. italicum as a pathogen of E. crassipes and of its potential use as a biological control agent for the management of water hyacinth.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.81-87
• /
• 2005

A fracture of hand held device, such as radio, TV and CD-RW drive, mainly occurs due to drop situation. For CD-RW drive, the need of high reading/writing speed in conjunction with low price accelerates the fracture of the device. Computer simulation can reduce the period of development and enhance impact characteristic of device. In this study, the detailed finite element model of CD-RW drive was developed to predict the damage under drop conditions. Material property for shock absorbing damper was obtained from tensile test of raw material. A MOONEY-RIVLIN type rubber in LS-DYNA was used as the material model of damper. To assess the reliability of the developed model, drop test at 200G-2msec and 150G-10msec condition was conducted and acceleration at pick-up was compared.