• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.59-66
• /
• 2003

건설공사에서 발생하는 환경문제에 대한 관심이 고조되는 가운데 기성 말뚝을 항타하는 과정에서 유발되는 소음, 진동문제를 해결하기 위해 저소음, 저진동 공법인 매입말뚝공법이 많이 적용되고 있다. 국내에서는 매입말뚝공법으로 SIP공법이 주로 사용되고 있다. 그러나 아직까지 SIP공법에 관한 합리적인 지지력 산정식이 제시되어있지 못한 실정이다. 이에 대해 본 연구에서는 SIP 말뚝의 주면저항력 특성을 고찰하여 이러한 문제점들을 개선, 보완하기 위하여 다양한 조건에서 SIP말뚝 주면과 지반사이의 경계면에 대하여 직접전단 시험을 실시하였다. 시험 결과를 토대로 통일분류상 SM, SC 지반에서의 SIP말뚝 주면저항력 특성을 고찰하고 해당 지반에서 주면저항력 산정식을 제시하였다. 또한, 말뚝 경계요소의 저항력에 대한 새로운 비선형 수치 모델식과 계수산정식을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제19권6호
• /
• pp.653-677
• /
• 2005

Concrete filled steel tubular columns (CFT) are widely used in civil engineering works, especially in large scale of works because of high strength, deformation, toughness and so on. On the other hand, as a kind of strengthening measure for seriously damaged reinforced concrete piers of viaduct in Hansin-Awaji earthquake of Japan in 1995, reinforced concrete piers were wrapped with steel plate. Then, a new kind of structure appeared, that is, reinforced concrete filled steel tubular column (RCFT). In this paper, compression test and bending-shearing test on RCFT are carried out. The main parameters of experiments are (1) strength of concrete, (2) steel tube with or without rib, (3) width-thickness ratio and (4) arrangement of reinforcing bars. According to the experimental results, the effect of parameters on mechanical characteristics of RCFT is analyzed clearly. At the same time, strength evaluation formula for RCFT column is proposed and tested by experimental results and existed recommendations (AIJ 1997). The strength calculated by the proposal formula is in good agreement with test result. As a result, the proposed evaluation formula can evaluate the strength of RCFT column properly.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1503-1512
• /
• 2013

본 논문에서는 cohesive zone 모델을 이용한 유한요소해석에 기초해 압입 파괴인성 평가식을 제시한다. 먼저 Vickers 압입균열해석에 기초해 다양한 물성변수(항복변형률 ${\varepsilon}_o$, 푸아송비 ${\nu}$, 영률 E)의 들이 균열크기에 미치는 영향을 분석하고, 파괴인성을 압입 시 측정되는 최대하중과 균열길이로 나타낼 수 있는 수식을 회귀로 얻었다. 아울러 접촉길이 a, E/H (H: 경도) 등을 추가 압입변수로 선정해 다양한 형태의 파괴인성평가법을 제시했다. 이후 동일 압입하중에서 압입자각 및 압입자 형태와 균열 크기의 관계를 분석해 Vickers 압입 파괴인성평가법을 다양한 압입자 형태로 확장했다. 본 연구에서 제안된 평가식을 이용하면 압입시험으로 얻어지는 데이터로부터 바로 취성재료의 파괴인성을 예측할 수 있다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• 대한조선학회논문집
• /
• 제38권1호
• /
• pp.72-85
• /
• 2001

선박 판부재를 대상으로 중요한 하중경우의 하나인 양축방향 면내하중을 작용시키면서 이중판의 폭, 길이, 두께 및 주판(main plate) 부식 영향 등의 각종 파라메타 영향에 따른 이중판의 정적 강도평가를 주판의 접촉효과를 고려한 탄소성 대변형 비선형 시리즈 구조해석을 수행하였으며 이들 해석 결과로부터 각 파라메타의 변화에 따른 강성과 강도 특성을 분석하였다. 또한 이중판의 보강 효과가 최소한 새판으로 치환 보수한 평판 강도 수준으로 설계되어야 하므로 이를 손쉽게 파악할 수 있게 이중판으로 보강된 판부재를 등가 평판 두께로 환산할 수 있는 간이 평가식을 개발하였다. 이 개발식을 이용하여 각 이중판 설계의 영향인자 변화에 따른 등가 평판두께의 증감 정도를 파악하고 이로부터 적어도 새판으로 보수한 평판강도에 달할 수 있게 양축방향 면내 압축하중을 받는 이중판의 설계지침을 제시하였다. 마지막으로, 개발된 등가 평판 도출식은 고정밀 좌굴강도 평가식과 서로 일정한 상관관계가 있음을 확인하고 관계식을 정립하였다. 이 관계식을 각 경우별로 축적하여 앞으로 일일이 구조해석을 수행하지 않고도 설계된 이중판 강도를 등가 평판두께로 제시할 수 있는 간이 추정식의 개발에 이용될 수 있을 것으로 사료된다.

• 한국지진공학회논문집
• /
• 제16권6호
• /
• pp.29-36
• /
• 2012

Involved in a research for the application of seismic isolation to the nuclear industry, this study evaluates firstly the responses of seismic isolation system considering general ranges of structural period and damping ratio by using preliminary design formula. Secondly, coupling effects of input motions were evaluated to find out appropriate conditions of excitations and effect of the iteration for calculating yield displacement of lead core was also assessed in terms of response of a seismically isolated structure. Finally, the results of preliminary design calculation were compared with those of dynamic analysis and the propriety of the formula was evaluated and appropriate ranges of reduction factor were also suggested from the results.

• Journal of Radiation Protection and Research
• /
• 제19권1호
• /
• pp.37-50
• /
• 1994

X-선과 감마선의 에너지에 따른 선질특성과 선량 및 필름의 사진농도와의 관계를 이용한 필름배지선량계의 선량환산식을 실험적으로 체계화 하였고, 시간경과에 따른 잠상퇴행 특성과 방사선의 입사방향에 따른 방향특성을 실험적으로 조사하여 보정계수를 산출하였다. 본 연구에서 구한 선량환산식은 필름배지선량계의 기술기준인 성능판정 기준을 잘 만족시키는 것으로 나타났다.

• 대한한의학회지
• /
• 제28권3호통권71호
• /
• pp.144-155
• /
• 2007

Background : In western medicine, there has been much interest in medication teaching since the separation of dispensary from medical practice in 2000. On the other hand, few investigations have been carried out about medication teaching for herbal medicine. Objectives : The purpose of this study wasto investigate the current status of medication teaching of herbal medicine and develop a better guide. Methods : Pharmaceutical affairs law in Korea was searched and some medication teaching guides were compared and analyzed to develop a better guide suitable for herbal medicine. Results and Conclusions : The future guide should be based on scientific evidence and include the following: (1)the origin of each herbal formula (2)the constitution of each herbal formula and proportion of each herb included (3)the chief virtue of each herbal formula (4)the efficacy of each herbal formula (5)the safety of each herbal formula (6)combined treatment with herbal formulas and western drugs (7)the way of decocting each herbal formula (8)the way of safekeeping and period of circulation of each herbal formula (9)a summary and evaluation for each herbal formula (10)references of each herbal formula.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.39-47
• /
• 2003

A study of the structural strength evaluation on the doubler plate, considering various load cases that were subjected to in-plane and out of plane combined load, has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate for various load cases, elasto-plastic large deflection analysis is introduced, including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed, based on the results. In order to compare the doubler structure with the original strength of main plate, without doubler, simple formulas for the evaluation of the equivalent flat plate thickness are derived for each load case, respectively, based on the additional series of analysis of flat plate structure. Using these derived equations, the thickness change of an equivalent flat plate is analyzed according to the variation of various design parameters of doubler platesome design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas are discovered, and these relations are formulated for the future development of simple strength evaluation formula of general doubler plate structure.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.503-513
• /
• 2006

The duration time of aircraft noise event is also an important factor for the evaluation of civil aircraft noise, which is considered as a notable characteristic of military aircraft noise. SEL is proved as a suitable noise metric for the measuring military aircraft noise of various flight pattern considering the duration time of noise event. This study reviews whether SEL is a suitable for measuring civil aircraft noise and study shows SEL is fairly compensating the duration time of civil aircraft noise event for the evaluation of aircraft noise. Noise metric for the evaluation aircraft noise based on SEL is more appropriate than based on $L_{MAX}$ for compensating duration time of noise event either military aircraft or civil aircraft. In this reason, current formula of WECPNL based on energy average of measured $L_{MAX}$ for the evaluation of aircraft noise impact in 'Test Method of Noise and Vibration of Korea' is recommended to be amended to formula of WECPNL based on energy average of measured SEL considering compensation of noise event duration time, if WECPNL is not based on measured EPNL, a metric compensating duration time.