• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제30권3A호
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제29권5A호
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• The Journal of Korean Academy of Prosthodontics
• /
• 제61권3호
• /
• pp.189-197
• /
• 2023

Purpose. This study aimed to compare and evaluate the shear bond strength between various temporary prostheses resin blocks fabricated by subtractive and additive manufacturing methods bonded to self-curing reline resin. Materials and methods. The experimental groups were divided into 4 groups according to the manufacturing methods of the resin block specimens and each specimen was fabricated by subtractive manufacturing (SM), additive manufacturing stereolithography apparatus manufacturing (AMS), additive manufacturing digital light processing manufacturing (AMD) and conventional self-curing (CON). To bond the resin block specimens and self-curing resin, the reline resin was injected and polymerized into the same location of each resin block using a silicone mold. The shear bond strength was measured using a universal testing machine, and the surface of the adhesive interface was examined by scanning electron microscopy. To compare between groups, one-way ANOVA was done followed by Tukey post hoc test (α = 0.05). Results. The shear bond strength showed higher values in the order of CON, SM, AMS, and AMD group. There were significant differences between CON and AMS groups, as well as between CON and AMD groups. but there were no significant differences between CON and SM groups (P > .05). There were significant differences between SM and AMD groups, but there were no significant differences between SM and AMS groups. The AMS group was significantly different from the AMD group (P < .001). The most frequent failure mode was mixed failures in CON and AMS groups, and adhesive failures in SM and AMD groups. Conclusion. The shear bond strength of SM group showed lower but not significant bond strength compared to the CON group. The additive manufacturing method groups (AMS and AMD) showed significantly lower bond strength than the CON group, with the AMD group the lowest. There was also a significant difference between the AMD and SM group.

• Korean Journal of Psychosomatic Medicine
• /
• 제31권1호
• /
• pp.10-18
• /
• 2023

Objectives : The purpose of this study is to investigate the characteristics of patients referred for delirium and depressive disorder and to find direction of improvement of consultation-liason psychiatry in general hospital. Methods : We performed a retrospective computed chart review of the 4,966 inpatients hospitalized at Konkuk University Hospital who were referred to the Department of Psychiatry from August 1, 2005 to December 31, 2011. Results : Depressive disorder shows the order of frequency of consultation type Parallel-Complementary-Mending. Delirium shows the order of frequency of consultation type Mending-Parallel-Complementary. When comparing 'follow up consultation' and 'without follow up consultation' group within the depressive disorder, the proportion of men in the 'follow up consultation' group was higher. In the analysis of the consultation type, the 'follow up consultation' group showed the order of consultation type Parallel-Mending- Complementary, and type Parallel-Complementary-Mending in the 'without follow up consultation' group. When comparing 'follow up consultation' and 'without follow up consultation' group within the delirium, the proportion of the surgical field in the 'follow up consultation' group was higher. In the analysis of the consultation type, both group showed the order of consultation type Mending-Parallel- Complementary. Conclusions : Doctors in each department and psychiatrists should pay attention to delirium symptoms that may occur in surgical inpatients and preventive measures should be taken. Screening tests should be conducted in medical patients to properly evaluate coexisting psychiatric diseases. Risk factors of Delirium and Depressive disorder should be identified from the time of hospitalization, and actively discussing treatment plans and early interventions could improve the quality of medical services.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제29권4호
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• The Journal of Korean Academy of Prosthodontics
• /
• 제61권3호
• /
• pp.179-188
• /
• 2023

Purpose. The purpose of this study was to evaluate the effect of surface treatments on the shear bond strength of two types of zirconia (3-TZP and 5Y-PSZ) with resin cement. Materials and methods. Two different types of zirconia specimens with a fully sintered size of 14.0×14.0×2.0 mm³ were prepared, polished with 400, 600, and 800 grit silicon carbide paper, and buried in epoxy resin. They were classified into four groups each control, sandblasting, primer, and sandblasting & primer. Cylindrical resin adhered to the surface-treated zirconia with resin cement. It was stored in distilled water (37℃) for 24 hours, and a shear bond strength test was performed. The normality of the experimental group was confirmed with the Kolmogorov-Smirnov & Shapiro-Wilk test. The interaction and statistical difference were analyzed using a two-way ANOVA. A post-hoc analysis was performed using Dunnett T3. Results. As a result of two-way ANOVA, there was no significant difference in shear bonding strength between zirconia types (P > .05), but there was a significant correlation in the sandblasting, primer, and alumina sandblasting & primer group (P < .05). Dunnett T3 post-test showed that, regardless of the type of zirconia, shear bonding strength was sandblasting & primer > Primer > sandblasting > control group (P < .05). Conclusion. There was no difference in shear bond strength between the types of zirconia. The highest shear bond strength was shown when the mechanical and chemical treatments of the zirconia surface was performed simultaneously.

• 한국노년학
• /
• 제30권4호
• /
• pp.1293-1309
• /
• 2010

This study is aimed to evaluate the effects of community-based prehabilitation program developed to prevent functional decline in the frail elderly and to provide a basis to practically operate this program in the public health care service. From March to August 2009, 110 frail elderly people were recruited among the registered participants of the home visit program in Korea to perform a prospective randomized community trial. We randomly assigned these people into two groups. One group (n=50) participated in the visiting prehabilitation program for 3 months focusing on improving their muscle strength of upper and lower limbs, walking ability, and balancing. The other group (n=60) underwent our visiting fall prevention program for control. To assess the effectiveness of prehabilitation program, physical functioning (PF) and short physical performance battery (SPPB) were measured for the primary outcomes and also some other indicators: exercise performance, nutritional status, emotional functioning, experience of admission, and events of fall. As a result, significant improvements of geriatric functional status were noticed among the participants. After 3 months, PF increased by 1.3 ± 3.8 points in prehabilitation group and decreased by 1.1 ± 5.4 points in controls (p=.020). SPPB improved by 2.4 ± 2.0 points in prehabilitation group and increased only 0.3 ± 1.5 points in controls (p<.001). Significant effects were also shown in their exercise performance tests and emotional status, the number of multiple falls, and the experience of functional decline after the fall (p .002-.038). Visiting prehabilitation program is safe and effective program for frail older adults. Thus, it is strongly recommended to universally adopt this program to prevent functional decline in the frail elderly.

• Journal of Korea Entertainment Industry Association
• /
• 제13권2호
• /
• pp.197-205
• /
• 2019

This study was to compare arterial stiffness and hemodynamic responses between male smokers and non-smokers. This study also investigates the influences of smoking before exercise on arterial stiffness and hemodynamic responses. 24 male subjects of age 20-29 without history of cardiorespiratory disease were divided into smokers and non-smokers. Smokers had more than 5 years of smoking experience. In order to evaluate the effects of pre-exercise smoking, smokers were tested twice, once with a cigarette before the exercise and the other once without one. Data was collected from bio-impedance analysis, SphygmoCor XCEL, graded exercise test, and fitness test. Main results of this study are as follows: First, there are differences between smokers and non-smokers in cardiorespiratory and hemodynamic response functions, as shown by maximal oxygen consumption, exercise duration, and heart rate. Second, the although the arterial stiffness between smokers and non-smokers showed statistically significant differences in the speed of the pulse wave velocity and augmentation index, smoker had a faster rate. It shows that smoking behavior has a negative impact on the cardiovascular system. Third, pre-exercise smoking behavior does have an impact on cardiorespiratory and hemodynamic response functions, as shown by exercise duration and heart rate. Lastly, arterial stiffness between smokers and non-smokers showed statistically not significant in the speed of the pulse wave velocity and augmentation index. However, the difference was not statistically significant. Brachial systolic pressure, a component of pulse wave analysis, on the other hand, was significantly dependent on pre-exercise smoking behavior. Subjects who participated in this study are college students in early 20s. Given their relatively short history of smoking, it is possible that their smoking habits are not severe enough to develop into cardiorespiratory or cardiovascular diseases. But Smokers showed lower levels of cardiopulmonary functions, as maximal oxygen consumption and exercise duration than nonsmokers.

• Journal of the Korean Society of International Agriculture
• /
• 제23권5호
• /
• pp.520-530
• /
• 2011

This study was carried out to evaluate the possibility of rice double cropping in Korea by assessing the growth and yield performance of rice cultivars transplanted at the extremely-early date. When the transplanted rice seedling was exposed to low temperature below 0℃, the survival rate decreased drastically. However, short exposure to below 0℃ one or two times did not damage transplanted rice seedling so severely. Thus, the earliest transplanting in spring would be possible when minimum temperature rises above 0℃. Compared with the conventional seedling nursery tray (CSNT), seedling rearing with the potted nursery tray was more effective for increasing leaf age and seedling dry weight during nursery period. In the first rice cropping, rice cultivation with seedlings reared in PSNT showed shorter growth duration and cumulative temperature from transplanting to heading than that with seedlings reared in CSNT. The earliest heading date on July 4 in Jinbuolbyeo was earlier by two to three days than that of Dunaebyeo. If rice has not exposed to cold damage, the earliest heading date of Jinbujolbyeo can advance to June 30 or July 1. In this case, rice harvest would be possible on August 5, enabling the rice transplanting of the second rice cropping before August 10. At transplanting time with low temperature damage rice yield were less than 400 kg/10a while rice yield exceeded 400 kg/10a at transplanting time without low temperature damage.

• (The) Research of the performance art and culture
• /
• 제19호
• /
• pp.221-280
• /
• 2009

This thesis is a study of the rise and the characteristic of 'Hyangto Gakeuk(literally Song drama of the country or local music drama)' in the Early 1940s. During the colonial period, there were attempts to incorporate traditional Korean music elements with Western operatic form. This type of music drama with librettos based on traditional tales came to be known as 'Hyangto Gakeuk'. Mostly 'Hyangto Gakeuk' has led this effort under the director Seo Hang-Suk, the composer Ahn Ki-Young and the lyricist Seol Eui-sik. In the first chapter, the study aims at arranging the performance history of 'Hyangto Gakeuk' composed by Ahn Ki-Young. Also, the study examined representative works after classifying 'Hyangto Gakeuk' performed by Lamila Music Drama Troupe, and Bando Music Drama Troupe. There is significant meaning to evaluate 'Hyangto Gakeuk' in the history of Korean music drama through this analysis of the performance history. In the second chapter, I will analyze with representative works composed by Ahn Ki-Young, a pioneer in the Korean art song. He tried to create the music that held the nationalism and tradition. His works which were called 'Kageuk' laid down the foundation of Korean original operatic style. This study demonstrated characteristics of 'Hyangto Gakeuk' as 'the beginning' in modern musical drama history and its effects on Korean musical drama developments. Namely, 'Hyangto Gakeuk' based on Korean traditions can be seen as examples of original modern musical in Korea. Practically, study on all the aspects of performance not only text generally studied, dramaturgy and criticism, but also performance concept and intention of creators in early period.