• 대한토목학회논문집
• /
• 제6권4호
• /
• pp.11-19
• /
• 1986

연안류(沿岸流)는 연안표사(沿岸漂砂) 해안침식(海岸侵食) 또는 항만매몰(港灣埋沒)외 원인(原因)이 되기도 하며, 연안역(沿岸域)의 물질확산(物質擴散)의 외력(外力)으로 작용(作用)하기 때문에, 그 현상(現象)의 이해(理解) 및 구명(究明)은 공학적(工學的)으로 갖는다. 본(本) 연구(硏究)에서는 실험(實驗)을 통해서 연안류(沿岸流)의 분포특성(分布特性)을 고찰(考察)하고, 실험결과(實驗結果)를 Longuet-Higgins model에 의한 계산치(計算値)와 비교(比較) 검토(檢討)하였다. 일반적(一般的)으로 연안류(沿岸流)는 쇄파대내(碎波帶內)에 국한(局限)되어 분포(分布)하며, 쇄파대외(碎波帶外)에서는 매우 미약(微弱)함을 보였다. 연안류(沿岸流) 수심방향(水深方向)으로의 분포(分布)는 거의 일정(一定)하였으며, 실험치(實驗値)와 계산치(計算値)는 최대치(最大値) 부근(附近)을 제외하고, N=0.05 일 경우 좋은 일치(一致)를 보이고 있다.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1738-1746
• /
• 2002

In the FSI (Fluid-Structure Interaction) problems, two different governing equations are to be solved together. One is fur the fluid and the other for the structure. Furthermore, a kinematic constraint should be imposed along the boundary between the fluid and the structure. We use the combined formulation, which incorporates both the fluid and structure equations of motion into a single coupled variational equation so that it is not necessary to calculate the fluid force on the surface of structure explicitly when solving the equations of motion of the structure. A two-dimensional channel flow divided by a Bernoulli-Euler beam is considered and the dynamic response of the beam under the influence of channel flow is studied. The Navier-Stokes equations are solved using a P2P1 Galerkin finite element method with ALE (Arbitrary Lagrangian-Eulerian) algorithm. The internal structural damping effect is not considered in this study and numerical results are compared with a previous work fer steady case. In addition to the Reynolds number, two non-dimensional parameters, which govern this fluid-structure system, are proposed. It is found that the larger the dynamic viscosity and density of the fluid are, the larger the damping of the beam is. Also, the added mass is found to be linearly proportional to the density of the fluid.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.775-782
• /
• 2010

본 연구는 대형 석탄 화력 발전소 탈황설비 내 흡수탑의 성능향상을 위하여 Tray 설치 가능성을 검토하기 위한 연구로 전산 유체역학(CFD) 기법을 이용하여 탈황설비 내 흡수탑의 내부유동을 전산해석 하였다. 흡수탑 내의 Gas와 Slurry의 거동에 대한 사실적 묘사를 위해 Euler-Lagrangian 기법을 이용한 전산해석을 수행하였다. 기존 흡수탑 내에 Tray를 설치함에 따라 탈황설비 내에서 Slurry의 체공시간 증가로 인한 펌프동력 절감과 압력강하 증가로 인한 Fan의 소요동력 증가에 대하여 중점적으로 비교 및 고찰하였다. 그 결과 Tray를 설치함에 따라 흡수탑 내에 Slurry의 체공시간과 배기가스의 압력강하가 증가되는 것을 확인할 수 있었다. 체공시간 증가로 인하여 절약된 동력이 압력강하에 의한 동력 소모량 증가보다 더 큰 것으로 확인되었다.

• 한국가시화정보학회지
• /
• 제17권3호
• /
• pp.24-31
• /
• 2019

Recently, an air-lift bio-reactor operated by micro bubbles has been utilized to product hydrogen fuel. To enhance the performance, characteristics of hydrodynamics inside the bio-reactor were analyzed using a numerical simulation for two-phase flow. An Eulerian model was employed for both of liquid and gas phases. The standard k-ε model was used for turbulence induced by micro bubbles. A Population Balance Model was employed to consider size distribution of bubbles. A hollow cylinder was introduced at the center of the reactor to reduce a dead area which disturbs circulation of CO bubbles. An appropriate diameter of the draft tube and hollow cylinder were optimized for better performance of the bio-reactor. The optimum model could be obtained when the cross-sectional area ratio of the hollow cylinder to the reactor, and the width ratio of the riser to the downcomer approached 0.4 and 3.5, respectively. Consequently, it is expected that the optimum model could enhance the performance of the bio-reactor with the homogeneous distribution and higher density of CO, and more effective mixing.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.10-15
• /
• 2012

선형의 천수방정식을 이용하여 에너지 감쇠가 있는 경우의 파랑특성을 분석하였다. 기하광학기법을 이용하여 위상속도 및 에너지속도를 이론적으로 유도하였으며 수치모형을 통하여 검증하였다. 에너지감쇠가 있는 경우 파고, 위상속도, 에너지속도 모두 변하면서 파랑변형에 영향을 끼쳤다. Euler 의 접근법에 의하여 복소수 형태의 파수를 사용할 경우 에너지 감쇠가 클수록 위상속도는 감소하는 반면에 에너지속도는 위상속도보다 큰 값을 가지면서 꾸준히 증가하는 결과가 나왔다. Lagrange의 접근법에 의하여 복소수 형태의 각주파수를 사용할 경우 에너지 감쇠가 발생하는 파군이 에너지속도로 전파하는 사실을 확인할 수 있었다. 또한 파랑의 천수와 굴절이 발생하는 경우 두 경우 다 에너지속도의 영향을 받는 것을 이론으로 발견하였고, 경사면 위로 파랑이 전파하는 경우 이 사실을 수치실험으로 확인하였다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.68-78
• /
• 2006

In the past few years, considerable efforts have been directed towards the further development of Urea-SCR(selective catalytic reduction) technique for diesel-driven vehicle. Although urea possesses considerable advantages over Ammonia$(NH_3)$ in terms of toxicity and handling, its necessary decomposition into Ammonia and carbon dioxide complicates the DeNOx process. Moreover, a mobile SCR system has only a short distance between engine exhaust and the catalyst entrance. Hence, this leads to not enough residence times of urea, and therefore evaporation and thermolysis cannot be completed at the catalyst entrance. This may cause high secondary emissions of Ammonia and isocyanic acid from the reducing agent and also leads to the fact that a considerable section of the catalyst may be misused for the purely thermal steps of water evaporation and thermolysis of urea. Hence the key factor to implementation of SCR technology on automobile is fast thermolysis, good mixing of Ammonia and gas, and reducing Ammonia slip. In this context, this study performs three-dimensional numerical simulation of urea injection of heavy-duty diesel engine under various injection pressure, injector locations and number of injector hole. This study employs Eulerian-Lagrangian approach to consider break-up, evaporation and heat and mass-transfer between droplet and exhaust gas with considering thermolysis and the turbulence dispersion effect of droplet. The SCR-monolith brick has been treated as porous medium. The effect of location and number of hole of urea injector on the uniformity of Ammonia concentration distribution and the amount of water at the entrance of SCR-monolith has been examined in detail under various injection pressures. The present results show useful guidelines for the optimum design of urea injector for reducing Ammonia slip and improving DeNOx performance.

• 한국항공우주학회지
• /
• 제44권4호
• /
• pp.290-297
• /
• 2016

사각덕트에서 난류 유동장으로 분사되는 액체 제트의 액주 분열과 미립화 현상에 관한 LES를 수행하였다. 기체상태의 공기 유동 해석에 오일러리안 해법을 사용하고, 액적 추적을 위하여 라그랑지안 해법을 사용하여 기체-액체간 이상유동(two phase flow) 해석을 수행하였다. 액적 분열 모델, 아격자 스케일 모델 및 공간 차분법에 따른 액적 분열을 조사하였다. 액체 제트의 침투깊이를 경험식과 비교하였으며 경험식보다 약간 높음을 알 수 있었다. 제트 후류에서 사우터 평균직경에 대한 분석을 수행하였다.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.435-460
• /
• 2017

The main objective of this study is to investigate the turning and zig-zag maneuvering performance of the well-known naval surface combatant DTMB (David Taylor Model Basin) 5415 hull with URANS (Unsteady Reynolds-averaged Navier-Stokes) method. Numerical simulations of static drift tests have been performed by a commercial RANS solver based on a finite volume method (FVM) in an unsteady manner. The fluid flow is considered as 3-D, incompressible and fully turbulent. Hydrodynamic analyses have been carried out for a fixed Froude number 0.28. During the analyses, the free surface effects have been taken into account using VOF (Volume of Fluid) method and the hull is considered as fixed. First, the code has been validated with the available experimental data in literature. After validation, static drift, static rudder and drift and rudder tests have been simulated. The forces and moments acting on the hull have been computed with URANS approach. Numerical results have been applied to determine the hydrodynamic maneuvering coefficients, such as, velocity terms and rudder terms. The acceleration, angular velocity and cross-coupled terms have been taken from the available experimental data. A computer program has been developed to apply a fast maneuvering simulation technique. Abkowitz's non-linear mathematical model has been used to calculate the forces and moment acting on the hull during the maneuvering motion. Euler method on the other hand has been applied to solve the simultaneous differential equations. Turning and zig-zag maneuvering simulations have been carried out and the maneuvering characteristics have been determined and the numerical simulation results have been compared with the available data in literature. In addition, viscous effects have been investigated using Eulerian approach for several static drift cases.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.75-85
• /
• 2016

감쇠기를 사이에 두고 여폭약과 수폭약으로 충전된 파이로 착화기는 격벽의 압력 감쇠 현상과 고에너지 물질의 충격 점화 특성을 갖는다. 고폭약의 폭굉 반응 및 비반응 물질 통과에의 폭압 감쇠와 더불어 격벽의 형상 변화를 모사하기 위해서는 충격 전달에 의한 gap test의 폭굉 모델링이 필요하다. 본 연구에서는 오일러리안 레벨셋 기법이 적용된 다중물질 하이드로 코드를 사용하여 pentolite 작약과 열폭압 RDX의 폭발 반응 및 PMMA gap을 통과하는 충격파 전달을 해석함으로써 화약-격벽간 상호작용 및 임계 두께, 음향 임피던스, go/no-go 기폭 점화에 대한 특성을 정량화하였다.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.324-332
• /
• 2018

It is known that damages to the subsea cables used for electric power transmission between islands and countries, including renewable energy from offshore wind power, current, tides, etc., cost much to restore, which causes social and economic losses. Various types of fishing rigs and anchors have been reported to be the greatest hazards to subsea cables. It is possible to design and construct a suitable protection facility for a subsea cable by precisely estimating the underwater behavior of such hazardous apparatuses. In this study, numerical simulations of the underwater behaviors of various hazardous apparatuses were carried out using fluid-structure interaction (FSI) analysis as a basic study to simulate the actual behavior phenomena of hazardous apparatuses in relation to a subsea cable. In addition, the underwater drop characteristics according to the types of hazardous apparatuses were compared. In order to verify the accuracy of the FSI analysis method used in this study, we compared the test results for underwater drops of a steel ball bearing. Stock anchors, stockless anchors, and rocket piles, which were actually reported to be the cases of damage to subsea cables along the southwest coast of Korea, were considered as the hazardous apparatuses for the numerical simulations. Each hazardous apparatus was generated by a Lagrangian model and coupled with the fluid domain idealized by the Eulerian equation to construct the three-dimensional FSI analysis model. The accuracy of the numerical simulation results was verified by comparing them with the analytical solutions, and the underwater drop characteristics according to the types of hazard apparatuses were compared.